Dartwood Dual-Shot Blaster
Safety Precaution
- CAUTION: Risk of fire and burns. Do not open, crush, heat above 45˚C, or incinerate. Follow the manufacturer’s instructions.
- Store items in a cool, dry place. Do not submerge the battery or device in water.
- Do not eat. Keep away from pets.
- Do not freeze or modify rounds.
- Do not modify blaster. Do not disassemble the device or battery.
- Do not leave unattended when charging the device.
- When shooting the gel shots, make sure that there are no foam darts already loaded in the gun.
- When shooting the foam darts, make sure there are no gel shots in the gel shot bottle.
- Impact from rounds may cause temporary marks on the skin.
In the Box
1 x dual-shot blaster
1 x rechargeable battery pack
1 x USB power cord
1 x safety goggles
1 x gel-shot-bottle connector
1 x gel-shot bottle
10 x suction cup soft bullet
1 x baggie of gel-shot bullets
Introduction to Parts
- bullet bottle
- gel-shot-bottle connector
- power switch
- trigger
- battery compartment
- lights
- nozzle
How to Charge
- Connect the USB cable to the battery pack.
- Connect the USB to a USB power source, such as a wall plug or a laptop.
- When the battery pack is properly connected and the battery pack is charging, the USB connector’s indicator light will go on. Once fully charged, the light will go off. Charging time is about 1.5 to 2 hours.
- The battery pack will become warm when charging, which is normal.
- Only use the original USB charging cable for charging.
- When not using Dual-Shot Blaster, turn off the power switch to prevent energy drain and battery damage
Growing the gel-shot bullets
- Pour a small amount of the dry gel-shot bullets into a container.
- Gel shot expansion times vary according to water temperature.
- If you use cold water, please soak the gel shots for about 3 hours.
- When using water that is 122° F (50° C), it will take about one hour for the gel shots to absorb water and grow.
Installing the Battery
- Unscrew and open the battery cover in the Dual-Shot Blaster’s handle.
- Connect the battery to the cable inside the Dual-Shot Blaster handle.
- Fit the battery into the handle/battery compartment.
- Close the battery-handle latch and twist the screw to lock
Installing the gel-shot bottle
- Fit the bottle mount to the top of the Dual-Shot Blaster and making sure the holes align properly
- Fill the gel-shot bottle with the full-sized gel shots, and pour out any excess water from the bottle to avoid damaging the Dual-Shot Blaster.
- Turn the Dual-Shot Blaster upside down and twist the gel-shot bottle to tighten it into the bottle mount.
How to shoot with the Dual-Shot Blaster
- Press the power switch.
- Pull the trigger once to fire a test shot.
- Continuously pull the trigger to fire repeatedly
How to shoot the foam darts
- Load the foam darts from the front, one at a time.
- Pull the trigger once to shoot.
Troubleshooting
FOR MORE MANUALS BY DARTWOOD, VISIT MANUALSLIBRARYY
Dartwood Dual-Shot Blaster-FAQs
Q1: How do I load the darts correctly?
A: Find the two barrels on the front. Press the orange, smart-dart-compatible darts firmly onto the posts inside each barrel until they click into place. Make sure the dart heads are facing forward and are seated all the way down for the best performance.
Q2: Why won’t my blaster fire?
A: First, check the safety lock. A red dot means it’s locked. Slide the lock forward until you see green. If it’s still not firing, you may need to prime it again. Pull the priming handle all the way back until it clicks, then push it fully forward.
Q3: How do I remove a stuck dart?
A: Never use another dart or a sharp object to remove a jam. First, ensure the blaster is not primed and the safety is on. Then, use the included dart removal tool or a blunt, flexible object like a pencil eraser to gently push the stuck dart out from the front of the barrel.
Q4: What is the effective range of the blaster?
A: The Dartwood Dual-Shot is designed for optimal accuracy and performance at short-to-mid ranges, typically up to 30 feet. For the best results, aim slightly above your target for longer distances.
Q5: Can I use darts from other brands?
A: This blaster is officially compatible with “Elite-style” darts. While other brands may fit, we strongly recommend using only official Dartwood darts to ensure proper performance, prevent jams, and avoid potential damage to the internal mechanism.
Q6: How do I know when the blaster is ready to fire?
A: The blaster is ready when the priming handle is fully pushed forward and you hear a “click.” You will also see the orange trigger through the rear housing, indicating it is in the “fire” position. Always keep the blaster pointed in a safe direction when it’s in this state.
Q7: Is the blaster safe for younger children?
A: The Dartwood Dual-Shot is recommended for ages 8 and up. All users should wear protective eyewear. It is not a toy and should be used under adult supervision. Never modify the blaster or aim at anyone’s face, eyes, or unprotected skin.
Q8: How should I store the blaster when not in use?
A: Store the blaster in a cool, dry place away from direct sunlight. Leave the magazines empty and do not store darts loaded in the barrels, as this can weaken the spring and dart foam over time.