Aqara Zigbee T1 Wireless Mini Switch
Product Introduction
Aqara Wireless Mini Switch is a remote control switch with a compact design and low energy consumption. You can place or stick it almost anywhere. Single press, double press or long press to control various smart accessories, such as Smart Light and Smart Plug.
- * A hub is required.
- * Aqara Hub is required to enable the Aqara Wireless Mini Switch to work with HomeKit technology. See www.aqara.com for more details.
- * This product is for indoor use only.
Quick Setup
- Please add the Hub to the app according to the Hub Quick Start Guide.
- Please remove the battery insulation tab before use.
- Please open the app, tap “Home”, and then tap”+” in the top right area to enable the “Add Device (Accessory)” page. Select ‘Wireless Mini Switch”, and add it according to instructions.
* If the connection falls, please move the accessory closer to the Hub and try again.
Installation
Effective Range Test: Single-press the reset button on the accessory at your desired position. If the Hub makes voice prompts, it indicates that the accessory can communicate effectively with the Hub.
* Avoid metal surfaces to maximize signal strength.
- Option 1: Place it directly in the desired position.
- Option 2: Remove the protective film and stick it to the desired position.
* Keep the surface clean and dry.
Identify an Accessory: Open the app, go to the “Device List (Accessories)” page. Press the reset button on the accessory. If the Hub makes voice prompts and the related accessory icon in the app blinks, it indicates that the accessory is identified.
* Only the Aqara Home app and Aqara app support this function.
Specifications
- Model: WXKG11LM
- Dimensions: 45 x 45 x 12 mm (1.77 x 1.77 x 0.47 in.)
- Wireless Protocol: Zigbee
- Battery: CR2032
- Operating Temperature: -10′ -+50 °C
- Operating Humidity: O – 95% RH, no condensation
- Online Customer Service: www.aqara.com/support
- Email: [email protected]
- Manufacturer: Lumi United Technology Co., Ltd.
- Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China.
FCC ID: 2AKIT-WXKG11LM
Federal Communications Commission (FCC) compliance statement
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any Interference received, including Interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful Interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
IC: 22635-WXKG11LM
IC NOTICE TO CANADIAN USERS
This device complies with Industry Canada license-exempt ASS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device. This device complies with ASS-247 of Inclusby Canada. Operation is subject to the condition that this device does not cause harmful interference. This Class B digital apparatus complies with Canadian ICES-003. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Hereby, LUMI UNITED TECHNOLOGY CO., LTD declares that the Radio Equipment type complies with RED 2014153/EU. The full text of the EU Declaration of Conlonnity is available at the following internet address: www.lumiunited.com/DoC. This product can be used across EU member states. Complies with the European Union’s Restriction of Hazardous Substances Directive, which protects the environment by restricting specific hazardous materials and products.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
RECYCLING. This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European Directive 2012/19/EU to be recycled or dismantled to minimize its impact on the environment.
For more manuals by Aqara, visit ManualsLibraryy
Aqara Zigbee T1 Wireless Mini Switch-FAQs
How do I use the Aqara Wireless Mini Switch?
You can use it as a smart button to control various smart accessories. For example, a single press can turn on lights, a double press can close curtains, and a long press can activate a scene or automation of your choice.
How do I pair the Aqara T1 Switch?
Press and hold the button on the switch for about 8 seconds until the indicator light blinks. This means the device has entered pairing mode. Then, use the Aqara Home app to connect it to your Aqara Hub.
Does the Aqara T1 Wireless Mini Switch need a hub?
Yes, the Aqara T1 requires an Aqara Hub that supports the Zigbee 3.0 protocol. The hub enables communication between the switch and your other smart home devices.
How do I reset the Aqara T1 Switch?
To reset the switch, press and hold the reset button for about 3 seconds until the indicator flashes three times. This will restore it to factory settings and allow re-pairing.
What is the difference between the Aqara Mini Switch and the T1 model?
The T1 version includes OTA (Over-the-Air) update support, improved stability, and better performance compared to the original Mini Switch. It also features the latest Zigbee 3.0 technology for faster and more reliable operation.
What can I use the Aqara T1 Wireless Switch for?
The switch can be configured as a doorbell, emergency button, or scene controller. It’s ideal for triggering smart home automations without using your phone or voice assistant.
How does the Aqara Wireless Mini Switch work?
The switch uses the Zigbee wireless protocol to communicate with the Aqara Hub, which then controls your smart devices. It consumes very little power and offers fast, secure connections.
What type of battery does the Aqara T1 use, and how long does it last?
It uses a CR2032 coin cell battery with an average lifespan of up to five years, depending on usage and environment.
Can I use the Aqara T1 without the internet?
Yes. Once connected through the Zigbee hub, the switch can operate your devices locally without an active internet connection. However, remote access and cloud-based automation require internet connectivity.
Is Aqara owned by Xiaomi?
Aqara is owned by Lumi United Technology, a company founded in 2009. It partners with Xiaomi’s ecosystem but operates as an independent brand focused on smart home innovations.