Wasserstein Smart Water Temperature Humidity Sensor
In the Box
1 x water sensor
1 x probe cable
1 x holder
1 x micro USB cable
2 x AA batteries
2 x screws
2 x wall anchors
Parts
Setup
- Mount the holder to the wall. Place one screw through the front and mount it accordingly
Click the water sensor onto the holder.
- Plug the probe cable into the cable port located on the water sensor
Plug the USB cable into the USB port.
Note: to use AA batteries instead of a USB cable, twist the back of the water sensor counterclockwise until it pops off. Then, insert two AA batteries
- Test the water sensor by placing the probe in a small puddle of water. If the water sensor has been installed correctly, it will beep when it touches water
Click the water sensor onto the holder.
Plug the USB cable into the USB port.
Note: to use AA batteries instead of a USB cable, twist the back of the water sensor counterclockwise until it pops off. Then, insert two AA batteries
Resetting the Device
- Twist the back of your sensor counterclockwise until it pops off.
- Reset the device by pressing and holding the button until the blue LED begins flashing.
App Setup
Minimum requirements:
- Smartphone or tablet running iOS 9.0 or later / Android 5.0 or later.
- 2.4 GHz WiFi Network (not compatible with 5 GHz connections).
- Upload speed of at least 2 Mbps
- Download the App by scanning the QR code or by searching “Wasserstein App”
- Sign up for a new account or log in to an existing account.
- Click “Add Device” or “+” in the top right corner. Then, select “Add Manually” or “Auto Scan.
To use Auto Scan, please enable Bluetooth on your mobile device.
You can control the settings of your Smart Water Sensor, including the alarm and low battery mode, as well as view your device record.
Specifications
- Power: 2 x AA batteries / Micro USB
- Operating voltage: 5 V
- Wireless type: 2.4 GHz
- Wireless range: 147.6 ft
- Size: 2.8 x 2.8 x 1.3 in (with holder)
FOR MORE MANUALS BY WASSERSTEIN HOME, VISIT MANUALSLIBRARYY
Wasserstein Smart Water Temperature Humidity Sensor-FAQs
How does the Wasserstein Smart Water Temperature Humidity Sensor work?
This sensor detects changes in water, temperature, and humidity levels. When water touches its probe, it completes an electrical circuit, triggering an alert through your connected app via Wi-Fi.
How do I reset the Wasserstein Smart Water Sensor?
Press and hold the reset button on the device for about 5–10 seconds until the indicator light blinks. This restores factory settings and allows you to reconnect it to your network.
How do I set up the Wasserstein Smart Sensor?
Download the compatible app, power on the sensor, and follow the on-screen instructions to pair it with your Wi-Fi network. Place it in the area you wish to monitor, such as basements or near water heaters.
Where should I install the water temperature and humidity sensor?
Install the sensor in areas prone to leaks or high humidity—like bathrooms, kitchens, or basements. Avoid placing it near vents, fans, or doors to prevent inaccurate readings.
Can the Wasserstein Sensor detect both leaks and humidity?
Yes. It detects both water leaks and changes in humidity, helping prevent mold growth and water damage.
How do I know if my water or humidity sensor isn’t working?
If you see “Sensor Not Responding” or get no alerts, check the battery and Wi-Fi connection. Replacing the battery or reconnecting to the app usually fixes the issue.
How long do Wasserstein water sensors last?
The sensor’s battery typically lasts up to 10 years, depending on usage and environmental conditions.
How can I clean my water sensor?
Wipe the sensor’s surface gently with a damp cloth. For mineral buildup, soak the probe in mild soapy water or white vinegar for a few minutes, then rinse and dry thoroughly.
What type of temperature sensor is used in this device?
It commonly uses thermistors or RTDs (Resistance Temperature Detectors) for precise temperature measurement.
Can water sensors detect humidity levels?
Yes. This smart sensor continuously monitors humidity to alert you when levels become too high or too low.