Blog Post

EverStart ATS-274 4-Slice Toaster Instruction Manual-feat

EverStart ATS-274 4-Slice Toaster Instruction Manual

EverStart logo

EverStart ATS-274 4-Slice Toaster 

EverStart ATS-274 4-Slice Toaster Instruction Manual-main

SHORT CORD INSTRUCTIONS

  1. A short power-supply cord is provided to reduce risk resulting from becoming entangled in or tripping over a longer cord.
  2. Longer extension cords are available and may be used if care is exercised in their use.
  3. If a longer extension cord is used:
    • a. The marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance.
    • b. The longer cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled by children or tripped over unintentionally.

POLARIZED PLUG

  • This appliance has a polarized plug (one blade is wider than the other); follow the instructions below:
  • To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

GROUNDING INSTRUCTIONS

Grounding Instructions (For Canadian Users)

  • This appliance must be grounded while in use to protect the operator from electrical shock. The appliance is equipped with a 3-conductor cord and a 3-prong grounding- type plug to fit the proper grounding-type receptacle.
  • The appliance has a plug that looks like sketch A. An adapter, sketch B, should be used for connecting sketch-A plug plugs to two-plugs to two-prong receptacles. The grounding tab, which extends from the adapter, must be connected to a permanent ground such as a properly grounded outlet box as shown in sketch C using a metal screw.EverStart ATS-274 4-Slice Toaster Instruction Manual-1

PARTS IDENTIFICATION

EverStart ATS-274 4-Slice Toaster Instruction Manual-2

  1. Toast slots
  2. Control panel
  3. Crumb tray
  4. Toasting lever
  5. Cancel button
  6. Bagel toasting button
  7. Defrost button
  8. 2 or 4-slice function button
  9. Darkness selector knob

HOW TO USE

Before First Use

  1. Read all the instructions and important safeguards.
  2. Remove all packaging materials; make sure items are received in good condition.
  3. Remove any stickers from surface of the toaster and wipe clean with a damp dishcloth.
  4. Place toaster on a flat, heat-resistant and non-flammable surface.
  5. Run one cycle before first use, to burn off any residue.
    • Do not use abrasive cleaners or scouring pads.
    • Do not immerse the appliance, cord and plug in water at any time.

Control Panel

  1. CANCEL: Press cancel anytime during the toasting process to end the cycle. The bread will pop up from the toaster.
  2. BAGEL: Use this function for toasting bagels or thick breads.
  3. DEFROST: For frozen bread, press the defrost button. This extends the toasting time to ensure desired toasting effect.
  4. 2 or 4 SLICE FUNCTION: Push in when toasting 4 slices, and leave out when toasting 2 slices.

Darkness Selector Knob

  • You may adjust the darkness of toast from 1 to 6, 1 being the lightest and 6 the darkest. Results may vary depending on the thickness of the bread and its moisture content. It is recommended that you select 3 or 4 (the middle range) in the beginning and then adjust accordingly.

HOW TO USE CONT.

To Toast Bread:

  1. Select the desired setting or function.
  2. Place bread into toasting slots and press lever down.
  3. When toasting a single slice, the bread can be placed in any one of the slots. If toasting one or two slices, leave the 2,4 slice function button out. If toasting three or four slices, press 2,4 function button in on the control panel.
  4. Toast will automatically pop up when the selected darkness is reached.

CAUTION

  • Do not leave the toaster unattended while in use.
  • Do not block the top of toaster while in use.
  • Do not toast any type of buttered bread. Melted butter may cause fire and/or toaster malfunction.
  • Never use metal or non-metal or sharp-edged utensil to remove toast.EverStart ATS-274 4-Slice Toaster Instruction Manual-3

HOW TO CLEAN

Always unplug toaster and allow to cool completely before cleaning.

  • To Clean Body of Toaster:
  • Wipe the body of toaster clean with soft, damp cloth.

To Clean Crumb Trays

There are two crumb trays located at the back of the toaster. It is recommended that the crumb trays be cleaned out at least every 3-5 uses.

  1. Gently slide the trays out from the back of the toaster.
  2. Dump the crumbs in the trash can.
  3. Using a damp cloth, wipe the crumb trays clean.
  4. Always dry the crumb trays completely before replacing them.
  5. Push firmly to close the trays and make sure they are securely in position before using the toaster

For more manuals by Everstart, visit ManualsLibrayy

EverStart ATS-274 4-Slice Toaster -FAQs

How do you use the frozen button on a toaster?

Place a frozen item in the toaster slots, adjust the shade selector, push the lever down, and press the frozen button. The light stays on until toasting is complete or the cancel button is pressed.

What controls a toaster?

A toaster uses infrared radiation from heating elements to toast bread. A thermostat regulates the heat by turning the heating elements on and off.

Do toasters have fuses?

Yes, toasters have fuses. If the toaster blows a fuse, check for lodged particles in the heating elements. Ensure the toaster is unplugged and cooled before cleaning.

Do toasters turn off automatically?

Yes, most toasters turn off automatically when the toasting cycle is complete, and the toast pops up.

What are the settings on a toaster?

The dial controls the duration of the toasting cycle. Lower numbers result in lighter toasting, while higher numbers toast the bread longer.

What does the cancel button do on a toaster?

The cancel button stops the toasting process immediately, turns off the heating elements, and lifts the food.

What is Turbo on a toaster?

Turbo refers to a convection fan in toaster ovens. It enhances cooking by circulating hot air for even toasting and baking.

Why unplug a toaster when not in use?

Unplugging a toaster prevents fire risks caused by faulty appliances or electrical issues, especially in heat-producing devices.

Is a toaster a control system?

Yes, a toaster is an open-loop control system. Users control the input (bread and settings), but the toaster operates without feedback.

What is the working principle of a toaster?

A toaster converts electrical energy into heat using thin filaments to emit infrared radiation, which toasts the bread evenly.

Leave a comment

Your email address will not be published. Required fields are marked *