Kobalt K24HP 24-Volt Cordless High Pressure Inflator User Guide

Kobalt K24HP 24-Volt Cordless High Pressure Inflator

PRODUCT SPECIFICATIONS

PLEASE NOTE: THIS INFLATOR OPERATES ON THE KOBALT 24V MAX LITHIUM-ION BATTERY SYSTEM (SOLD SEPARATELY).

PACKAGE CONTENTS

Warning:

• Remove the tool from the package and examine it carefully. Do not discard the carton or any packaging material until all parts have been examined.
• If any part of the tool is missing or damaged, do not attach the battery pack or use the tool until the part has been repaired or replaced. Failure to heed this warning could result in serious injury.

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble or operate this product. If you have any questions regarding the product, please call customer service at 1-888-3KOBALT, 8 a.m. – 8 p.m. EST, Monday- Friday.

CAUTION: THIS INFLATOR OPERATES ON THE KOBALT 24V MAX LITHIUM-ION BATTERY SYSTEM (SOLD SEPARATELY). DO NOT ATTEMPT TO OPERATE THIS NFLATOR WITH ANY OTHER BATTERY, SOURCE, OR VOLTAGE. DO NOT REWIRE OR RECONFIGURE THE INFLATOR FROM ITS ORIGINAL DESIGN,  N OR PERSONAL INJURY OR BODILY HARM MAY OCCUR.

Warning: YOU MUST READ, UNDERSTAND, ND AND FOLLOW ALL WARNINGS ON THE KOBAL T 24V BATTERY PACK BEFORE USING IT AND THIS INFLATOR

Warning:

The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full-face shield, as needed. We recommend using a wide vision safety mask over eyeglasses or standard safety glasses with shields. Always use eye protection marked to comply with ANSI 287 287.1e safety instructions provided in this manual are not intended to cover all possible conditions that may occur during product operation. Always use common sense and pay attention to all WARNING and CAUTION statements in this manual.

Work Area: Keep your work area clean and well well-litttered benches Dark areas increase the possibility of personal injury or property damage.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.

Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

Know the Tool

To operate this tool, carefully read this manual and all labels affixed to the tool before using it. Keep this manual available for future reference.

Important

This tool should be serviced only by a qualified service technician.

Read All Instructions Thoroughly

Some of the following symbols may be used on this tool. Please study them and their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely.

Work Area Safety

• Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks, which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Personal Safety

• Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence oalcohol orror medication. A moment of inattention while operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, a hard hat, or hearing protection, used for appropriate conditions, will reduce personal injuries.

Power Tool Use and Care

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of accidentally starting the power tool.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

Battery Tool Use and Care

• See the Separate Lithium-Ion Battery Manual for More Information and Warnings.
• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
• When the battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts the eyes, seek medical help. Liquid ejected from the battery may cause irritation or burns.

Service

• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Warning:

• Do not allow familiarity with the inflater to cause carelessness. Remember that one careless moment is enough to cause severe injury. Before attempting to use any tool, be sure to become familiar with all of the operating features and safety instructions.
• Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is a misuse and could result in a hazardous condition leading to possible serious personal injury.

PREPARATION

Kobalt 24V Max Battery Pack Use

To Attach Battery Pack

1. Make sure thathe t the battery and Inflater are clean and free of debris.
2. Align the raised portion on the battery pack with the grooves on the bottom of the inflater, then slide the battery pack into the Inflater’s Battery Adaptor (K) as shown (See 1a).
3. Make sure that the latch on the battery pack snaps into place and the battery pack is secured to the tool before beginning operation.

NOTICE: When placing the battery pack on the inflater, ensure that the raised rib on the battery pack aligns with the groove on the inflater, and the latches snap into place properly. Improper assembly of the battery pack can cause damage to internal components.

To Detach Battery Pack

1. Press the On/Off Power Button (B) to turn the inflater off (See 1 b).
2. Press the Battery-Release Buttons (R) to release the battery pack (See 1b).
3. Pull forward on the battery pack to remove it from the inflater.

• Ensure that your inflater’s battery adapter is free of any residue or debris. A dirty 24-volt power connection can cause the inflater and battery to overheat. Overheating can cause damage to your inflater/battery and could cause bodily harm or injury. Disconnect the battery when not in use.
• It is recommended that your Kobalt 24V Max Battery be fully charged to get the best performance from your inflater. If your battery is weak, the inflater will not work at its maximum output level. See Battery User’s Manual for charging and testing information.
• This inflater is designed for high-pressure inflation, to inflate: vehicle tires, bike tires, ATV tires, sports equipment, sports balls, and other high-pressure inflatables. Do not use for any purpose other than inflating. If you do so, bodily harm or personal injury can occur.
• CAUTION: Allow the inflater to cool down for 10 minutes after each 10 minutes of continuous operation.
• After using, turn off the power and disconnect the battery.
• The inflater is not a toy. Keep away from children at all times.
• Do not carry the inflater by the air hosee, as damage may occur.
• Do not leave the inflater unattended while in operation.
• Do not overinflate! Please follow the manufacturer’s instructions for the item you are inflating.
• Note: the Target PSI of “00” (zero) will allow the inflater to run until you turn it off manually or until it reaches a maximum of 120 PSI.
• Keep the inflater away from flammable areas/liquids at all times.
• Do not operate the inflater in wet areas.
• Operate the inflater only with the attachments that are included.
• USE SAFETY GLASSES. Also, use a face or dust mask if the operation is dusty.
• This inflater is not designed to fill air tanks or air shocks.

BATTERY SAVING MODE

The battery current to the inflator will automatically turn off after three (3) minutes of non-use. This is done to save battery life, should you forget to turn it off.

To turn the unit back on, press the On/Off Power Button (B) and the display light will come back on, indicating the inflater is ready to use (See 2a).

Note: The Target PSI on the Digital Pressure Gauge (D) will reset to “00” (zero) every time you restart the inflater (See 2a).

OPERATING INSTRUCTIONS

CAUTION: DO NOT OVERINFLATE THE ITEM BEING INFLATED

WARNING: Please read, understand, and follow all warnings before using this inflater.

• Make sure that the 24V Max Battery is firmly snapped in place (see page 7) and then place the inflater on a flat surface.
• Connect the Quick Connect Valve Adaptor {G} to the item you are inflating and push down the Valve Lock Lever to secure the connection. (See 3a). Press the On/Off Power Button (B) to tuturn theenflater on ( {See 3b).
• The Digital Pressure Gauge (D) will display the current pressure (in 0.1 PSI increments) of the item you are inflating on the upper section of the LCD Screen.
• The Target PSI setting appears in the lower right section of the LCD Screen {D). Press the or Buttons (E){F) on the control panel to set the desired Target PSI. The Target PSI range is: 1 to 120 PSI (in 1.0 PSI increments).
• Setting the Target PSI at “00” (zero) will allow the inflater to run until you stop it (or 120 PSI, where it will stop automatically). Use this feature with caution – always avoid over-inflation and never leave the inflater unattended when in use.
• To start the inflater, push the Button (A).
  Note: If the current pressure of the item you are inflating is greater than the Target PPSIh,  the inflater will turn on – unless the Target PSI is “00” (zero) – as stated above.
• To change the Target PSI  level, push the Button again (to pause inflation) and adjust the level as described above.
• The inflater will shut off automatically at the desired target PSI level that you have programmed into the Target PSI setting.
  Note: The inflater has a tolerance of + or – 5 PSI and will automatically shut off accordingly.
• To stop the inflater before it reaches the Target PSI level, push the Button. To resume inflation, simply press the Button again. Press the On/Off Power Button (B) to turn the inflater off. (The power automatically cycles off after three (3) minutes of no activity.)
  Note: Any time the inflater is powered off,  the Target PSI setting will reset to “00( {zero). Always check and reset the Target PSI before using this feature again.
• Remove the 24V Battery Pack and then wipe the plastic parts of the inflater clean using mild soap and warm water. Do not get moisture or water into the interior, LCD screen, moving part, or the battery adaptor. w the entire inflater to dry completely before use.}
• Read and follow the separate Battery Instructions for care and maintenance of Kobalt 24V Max Lithium Ion Batteries.

TROUBLESHOOTING

REPLACEMENT PARTS LIST

For replacement parts, call our customer service department at 1-888-3KOBAL T, 8:00 a.m. – 8:00 p.m., ET, Monday- Friday.

WARRANTY

For one (1) year from the date of purchase, the inflator is warranted and for three (3) years frothe m the date of purchase, the battery & charger are warranted for the original purchaser to be free from defects in material and workmanship. This guarantee does not cover damage due to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or expendable parts and accessories expected to become unusable after a reasonable period of use.

If you think your product meets the above guarantee criteria, please return it to the place of purchase with valid proof oof purchasese, and the defective product will be repaired or replaced at no charge. This guarantee gives you specific legal rights, and you may also have other rights that vary from state to state.

For more manuals by Kobalt, visit ManualsLibraryy

Kobalt K24HP 24-Volt Cordless High Pressure Inflator- FAQs