Fanttik X9 Cross 4X Portable Tire Inflator Instruction Manual

Fanttik X9 Cross 4X Portable Tire Inflator

SAFETY WARNINGS

• This product is not a toy and should not be used by children. Users should be above 16 years old.
• Keep a safe distance between children and the pump while inflating. There is a built-in lithium battery inside the product. Don’t place the product in a fire or dump the battery.
• Overheating, damage, or water may increase the risk of fire or explosion. It’s best to keep the product away from heat sources and not leave it for prolonged periods in a hot car.
•  Please store the product at a temperature ranging from -10-50°C. Extremely hot or cold environments may damage the battery and shorten the lifetime of the pump.
• Long-time storage of the product may decrease the effectiveness of the battery. Charge the pump at least once every three months to maintain its performance.
•  The product has a built-in DC motor, which may generate sparks during operation. Do not use it in an environment with dust or gas liable to explode.
• If there is an unusual noise or the temperature becomes very high during inflation, please turn off the pump immediately.
•  Before setting the inflation pressure value, make sure the pressure unit is correctly selected. Mixing up psi and bar could lead to dangerous over-inflation. Unit conversion: 1 bar 14.5psi, 1 bar 1 00kPa.
• Do not leave the pump unattended while it is in operation.
• Please use the product in a dry and clean environment. Don’t wash the product with water.
• After running for a long time, the temperature of the junction between the air tube and the main body can become very high. To avoid burns, avoid touching it.
• To avoid injuries from bursting items due to over-inflation, make sure you are aware of the maximum inflation pressure before you start.
• we recommend placing the pump on a flat, hard surface, for example, on top of your SUP. So as to avoid anything from blocking the inlet or outlet.
• Do not move the hose or air pump during the inflating process to avoid air leaks.
• Please connect the hose to the deflation valve when using the deflation mode.
• If sand is sucked into the air pump. Please stop pumping at first, then open the rubber plug on the air pump and pour out the sand. After that, you can continue to use it.
• The air pump cannot automatically stop inflating in blower mode. You need to press the start/stop button to stop inflating.

ACCESSORIES

*Carefully check the package contents. If anything is missing or damaged, please contact customer support.

PRODUCT OVERVIEW

1. 1 nflate port
2. Light
3. Deflate port
4. Battery Level Indicator
5. Target Pressure Value
6. Real-time pressure value
7. Present Unit
8. Inflate icon
9. Deflate icon
10. Preset mode
11. High temperature protection
12. + Button
13. Light On/Off Button
14. – Button
15. Mode Button
16. Start/Stop Button
17.  input/output port
18. Heat dissipation vent

Note: It is normal for the product to stop working when the temperature protection icon is on, and it could continue to be used when the temperature drops, while the icon disappeared. (The product will not charge when the high temperature icon is on.)

HOW TO USE

1. Battery Level Indicator
   Battery Level Indicator
   The battery level is shown by four bars
   • 1 bar = under 25%
   • 2 bars = between 25% and 50%
   • 3 bars = between 50% and 75%
   •  4 bars = between 75% and 100%
     Note: The battery indicator will flash when the battery level is below 10%.
2. Charging
   Fully charge the air pump before using it for the first time. Connect the charging cable to the PD30W power adapter(not included) to charge the air pump. (The pump will automatically shut down after 3 minutes of being fully charged.) (The pump cannot be used during charging.)
3. Turn on/ off
   1. Turn on: press and hold the start/stop button to turn the air compressor on.
   2. Turn off: Press and hold the start/stop button while the air compressor is turned on. The pump will automatically turn off after 3 minutes of inactivity.
      NOTE: The product will not automatically shut down when the light is on.
4. Connecting the High-pressure Air Hose and Nozzle
5. Detecting Air Pressure
   The current air pressure will automatically be displayed after the high-pressure air hose is connected to an item while the air pump is turned on. (Detecting pressure range: 0-75PSI}
6. Switch units
   Long-press the mode button for 3 seconds to switch pressure units(KPA, BAR, PSI).
7. Switch Preset Mode
   Press the mode button to switch between the 5 preset modes and manual mode below. Manual Mode: There’s no icon on the left side of the display, and the air pressure can be specified by the user and will be saved. Adjustable range: 3-75PSI
   SUP Mode: Default 15PSI. Adjustable Range: 3-28PSI
   Deflating mode: Constant deflating
   Ball Mode: Default 8PSI. Adjustable Range: 3-16PSI
   Blower Mode: Constant inflating
   Car Mode: Default 35PSI. Adjustable Range: 26-75PSI
   Manual mode: Default 45PSI. Adjustable Range: 3-75PSI
   Note:
   1.  The air pump will switch to a pressurized state, and the sound will become louder when the pressure reaches 2PSI. This is normal and not a problem with the air pump. On SUP Mode
   2. Please connect the hose to the deflation valve when using the deflation mode.
   3. The air pump cannot automatically stop inflating in blower mode. You need to press the starVstop button to stop inflating.
   4. The air pump will stop inflating after being rained in Deflation mode.
   5. The pressure value can be stored in memory when the pump is in manual mode.
8. Adjusting the Preset Pressure
   After selecting a mode, press + or – to increase or decrease the preset pressure value. Press and hold the + or- button to quickly adjust the pressure value. (Press the +/ -button once to increase/decrease 0.5PSI between 0-20PSI; 1 PSI between 20-75PSI.)
9. Light
   Press the light on/off button to switch between light on, SOS light, and light off when the air pump is on. (The lights will turn off after 30 minutes if there is no operation.)
10. lnftating
    • Start inflating: Press the start/stop button to start inflating. The current pressure is displayed in real-time while inflating.
    • Stop inflating: Once the preset pressure value has been reached, the air compressor will automatically stop inflating. The air compressor can also be manually stopped at any time while inflating by pressing the start/stop button once.
      Note:
      To avoid injuries from bursting items due to over-inflation, make sure you are aware of the maximum inflation pressure before you start. The air pump cannot automatically stop inflating in blower mode. You need to press the start/stop button to stop inflating.
11. Power Bank Function
    This air pump can be used as a power bank (PD30W) when it is not being charged or inflating other devices. The battery needs to have a reasonable level of charge in order to work as a power bank.
    Note:
    The air pump should be turned on when being used as a power bank. When being used as a power bank, the air pump will enter “Energy Saving” mode if inactive for 3 minutes, and the screen will only display the battery level icon. In energy-saving mode, when disconnecting the charged device from the air pump, it will automatically turn off.

SPECIFICATIONS

TROUBLESHOOTING

We recommend placing the pump on a flat, hard surface, for example, on top of your SUP. So as to avoid anything from blocking the inlet or outlet.

If sand is sucked into the air pump.Please stop pumping at first, then open the rubber plug on the air pump and pour out the sand. After that, you can continue to use it.

WARRANTY CARD

• Your Warranty Includes. 12-Month Coverage
  Within 12 months of purchase, we will provide timely and effective online after-sales service. We will repair or replace any defective product (due to a manufacturing fault) within the warranty period.
• Return Details
  In order to process your return as quickly as possible, we require the following information. Please fill out this form and include it in your return package.

• Email: [email protected]
• Website: www.fanttik.com

For more manuals by Fanttik, visit ManualsLibraryy

Fanttik X9 Cross 4X Portable Tire Inflator-FAQs