Bella So Yummy 17828 Portable To Go Blender Instruction Manual

Bella So Yummy 17828 Portable To Go Blender

IMPORTANT SAFEGUARDS

Basic safety precautions should always be followed, including the following:

1. READ ALL INSTRUCTIONS.
2. Close adult supervision is necessary when the Portable Blender is used by or near children.
3. Store your Portable Blender in a secure place, out of the reach of children. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or a lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety.
4. This Blender is not a toy. Children should be supervised to ensure they do not play with the appliance.
5. To disconnect, press the POWER ON/OFF button to STOP the blending operation. The Portable Blender and the white illuminated POWER ON/OFF button will turn off. Disconnect before assembling or disassembling parts and before cleaning.
6. To avoid causing damage or leaks to the jar and base, do not blend hot liquids.
7. Never place any Portable Blender attachments into a microwave oven or freezer.
8. Take care when handling the base of the Portable Blender without the blending jar attached. CAUTION: KEEP HANDS AWAY FROM THE EXPOSED BLADES! Blades are sharp and can cause severe injury if touched. Assemble with a clean blending jar immediately. IMPORTANT: As a safety precaution, your Portable Blender is equipped with a blending jar interlock system. The Portable Blender will not turn ON unless the blending jar is tightly sealed onto the base.
9. Keep hands and utensils out of the jar while blending. CAUTION: To reduce the risk of severe injury to persons or damage to the unit, AVOID CONTACT WITH MOVING PARTS. Blades can still spin when the lid is removed. WARNING: NEVER overfill the jar. To avoid personal injury, leakage, or damage to the Portable Blender, NEVER add ingredients past the MAX fill line.
10. Utensils, a scraper, or a small spatula may be used ONLY when the Portable Blender is not running.
11. Never place the base of your Portable Blender in the dishwasher.
12. To avoid spills, after blending, always allow ingredients to settle in your Portable Blender before unscrewing the lid.
13. To avoid spills and possible injury, always operate your Portable Blender with the lid tightly sealed.
14. To avoid spills and possible injury or damage to the Portable Blender, NEVER use carbonated drinks in your Portable Blender. Pressure build-up may cause the covered blending jar to burst.
15. To avoid spills and possible injury or damage to the Portable Blender, NEVER allow food to remain in the Portable Blender jar for prolonged periods of time. Pressure build-up or fermentation may cause the covered blending jar to burst.
16. NEVER run your Portable Blender with an empty blending jar, as this can damage the blender.
17. NEVER charge your Portable Blender when wet.
18. Use only high-quality USB charging leads (phone charger, computer, or car) and the USB-C cable supplied with your Portable Blender.
19. NEVER immerse the supplied charging cable in water or other liquids to avoid risk of electric shock.
20. Do not allow the USB charging cable to touch hot surfaces.
21. Avoid contacting moving parts. Do not attempt to defeat any safety interlock mechanisms.
22. Do not operate any appliance after the appliance malfunctions, or is dropped or damaged in any manner. Return the appliance to the nearest authorized service facility for information on examination, repair, or adjustment.
23. The use of attachments is not recommended by the manufacturer and may cause injuries to persons.
24. Do not incinerate this appliance even if it is severely damaged. The batteries can explode in a fire.
25. The appliance should only be used with the battery charger packaged with the appliance or those battery chargers according to Listed/Certified Information Technology (Computer) Equipment, or Listed/Certified ITE Power Supply, or Listed Class 2 Power Unit.
26. Do not use the Portable to-go blender in rain or wet conditions.

GETTING TO KNOW YOUR PORTABLE BLENDER

Product may vary slightly from illustrations.

BEFORE USING THE PORTABLE BLENDER FOR THE FIRST TIME

1. Carefully unpack the Portable Blender and remove all packaging materials. Check the contents to ensure that all attachments (Tritan™ blending jar, lid) are present and have been received in good condition.
2. Fill the blending jar with water to the MAX fill line and add a drop of liquid dish soap. BLEND for 1 cycle (30 seconds).
3. Repeat the procedure without soap. Add room temperature water to the MAX fill line. BLEND for 1 cycle (30 seconds).
4. Rinse well. Allow to air dry. WARNING: DO NOT IMMERSE THE BASE IN WATER.
5. Wipe the motor base with a damp cloth.
6. CHARGE THE PORTABLE BLENDER. Attach the USB charging cable provided to the base. Charge your Portable Blender with any high-quality USB charging lead: phone charger, computer, or car. Make sure the USB charging cable is inserted fully. When the cable is first connected, the POWER ON/OFF button will illuminate solid red. NOTE: To indicate when battery power is below 25%, a flashing pink light will illuminate when the POWER ON/OFF button is pressed once.
7. Charge unit for 3.5 hours. When the POWER ON/OFF button illuminates solid white, the Portable Blender is fully charged. A full charge will do up to 30 blends.
8. Remove the charging cable and store it in a dry, designated safe place before use.

OPERATING INSTRUCTIONS

1. Install the blending jar until the line on the back of the motor base is aligned with the line on the back of the blending jar. The white illuminated POWER ON/OFF button will flash 3 times. (Figure 1).  IMPORTANT: The Portable Blender should not be operated when the blending jar is empty. Add liquids or food to the blending jar before blending. WARNING: NEVER BLEND hot liquids exceeding 120°F/49°C.
2.  Add liquid ingredients to the blending jar first. Place the remaining ingredients on top. WARNING: NEVER overfill the jar. NEVER add ingredients past the MAX fill line.
3. Attach the lid to the blending jar. Turn clockwise until tightly sealed. IMPORTANT: As a safety precaution, your Portable Blender is equipped with a blending jar interlock system. The Portable Blender will not turn ON unless the blending jar is properly sealed onto the motor base. WARNING: To avoid personal injury, leakage, or damage to the Portable Blender, make sure the blending jar is not overloaded, and the lid is tightly sealed onto the blending jar before pressing the POWER ON/OFF button.

BLEND MODE

1. Press the POWER ON/OFF button twice to begin. The BLEND cycle is timed, and after 30 seconds, it will turn OFF automatically. Repeat as needed.
2. To turn the Portable Blender OFF at any time, press the POWER ON/OFF button once to STOP blending operation.
3. Check results and, if necessary, stir in liquids: water, juice, stock, coffee, alcohol, or mixer.
   Press the POWER ON/OFF button twice to resume blending.
4. Blend until the desired consistency is reached. WARNING: If the battery temperature gets too high, the POWER ON/OFF button will turn red and begin flashing. The Portable Blender will turn OFF. Allow the Portable Blender to rest before continuing.
5. Your Portable Blender is perfect for travel. Make sure the lid is tightly sealed onto the blending jar for use on-the-go.

BLEND TECHNIQUE

NOTE: For best results, remove ice cubes from freezer for 5 to 10 minutes before using. Frozen fruit should be cut into uniform, small chunks.

1. To BLEND frozen fruits or ice cubes, add liquids: water, juice, stock, coffee, or mixer, and a handful of frozen fruits or ice cubes.
2. Attach the lid, turn clockwise until tightly sealed.
3. For more difficult blending, flip the Portable Blender upside down. Press the POWER ON/OFF button twice to BLEND. Flip the Portable Blender back to right-side-up. BLEND until smooth.
4. Add additional liquid, chunks of frozen fruit, or cubes. Shake the Portable Blender to distribute contents and BLEND until the desired consistency is reached.

PULSE MODE

1. The PULSE mode is perfect when a chunkier consistency is desired. PULSE to prepare guacamole, salsa, hummus, and chopped ice.
2. Press and hold the POWER ON/OFF button for 2 seconds to initiate the PULSE mode. The white illuminated POWER ON/OFF button will begin to flash.
3. To PULSE, press the POWER ON/OFF button. Blades will stop when the button is released. PULSE until the desired consistency is reached.

USER MAINTENANCE INSTRUCTIONS

This appliance requires little maintenance. It contains no user-serviceable parts. Any servicing requiring disassembly other than cleaning must be performed by a qualified appliance repair technician.

CARE & CLEANING INSTRUCTIONS

1. Take care when handling the base of the Portable Blender without the blending jar attached. CAUTION: KEEP HANDS AWAY FROM THE EXPOSED BLADES! Blades are sharp and can cause severe injury if touched. Assemble with a clean blending jar immediately.
2. Rinse the jar and lid immediately after processing to prevent food from hardening and to make cleanup easier. NOTE: The Tritan™ blending jar and lid are dishwasher safe. These parts should NOT be cleaned with a heated dry cycle.
3. Fill the blending jar with water to the MAX fill line and add a drop of liquid dish soap. BLEND for 1 cycle (30 seconds).
4. Repeat procedure without soap. Add room temperature water to the MAX fill line. BLEND for 1 cycle (30 seconds).
5. Repeat procedure without soap. Add room temperature water to the MAX fill line. BLEND for 1 cycle (30 seconds).
6. Rinse well. Disassemble the jar and lid. Allow to air dry.
7. Wipe the motor base with a damp cloth or sponge. Dry thoroughly. NOTE: Motor base is water-resistant. However, the motor base is NOT dishwasher safe.

WARNING: DO NOT IMMERSE THE BASE IN WATER.

STORING INSTRUCTIONS

1. Assemble the Portable Blender. Attach the lid to the blending jar.
2. Store the assembled Portable Blender and charging cable in the original box or in a clean, dry place.

TROUBLESHOOTING

Limited TWO-YEAR Warranty

SENSIO Inc. hereby warrants that for a period of TWO YEARS from the date of purchase, this product will be free from mechanical defects in material and workmanship, and for 90 days in respect to non-mechanical parts. At its sole discretion, SENSIO Inc. will either repair or replace the product found to be defective, or issue a refund on the product during the warranty period.

The warranty is only valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt, as proof of purchase is required to obtain warranty validation. Retail stores selling this product do not have the right to alter, modify, or in any way revise the terms and conditions of the warranty.

EXCLUSIONS:

The warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use of the product, use of improper voltage or current, improper routine maintenance, use contrary to the operating instructions, disassembly, repair, or alteration by anyone other than qualified SENSIO Inc. personnel. Also, the warranty does not cover Acts of God, such as fire, floods, hurricanes, or tornadoes.

SENSIO Inc. shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty. Apart from the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose is limited in time to the duration of the warranty. Some states, provinces, or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, and therefore, the above exclusions or limitations may not apply to you. The warranty covers specific legal rights which may vary by state, province, and/or jurisdiction.

HOW TO OBTAIN WARRANTY SERVICE:

You must contact Customer Service at our toll-free number: 1-866-832-4843. A Customer Service Representative will attempt to resolve warranty issues over the phone. If the Customer Service Representative is unable to resolve the problem, you will be provided with a case number and asked to return the product to SENSIO Inc.

Attach a tag to the product that includes your name, address, daytime contact telephone number, case number, and description of the problem. Also, include a copy of the original sales receipt. Carefully package the tagged product with the sales receipt and send it (with shipping and insurance prepaid) to SENSIO Inc.’s address. SENSIO Inc. shall bear no responsibility or liability for the returned product while in transit to SENSIO Inc.’s Customer Service Center. Register your product and get support at: WWW.BELLAHOUSEWARES.COM.

For More Manuals By Bella, Visit ManualsLibraryy.

Bella So Yummy 17828 Portable To Go Blender-FAQS