Razorri PTK17A Electric Tea Maker User Manual

Razorri PTK17A Electric Tea Maker

Safety and Warnings

Read all instructions before using this product.

• Before connecting the Tea Maker to the power supply, check that the voltage indicated on the appliance corresponds with the voltage in your home.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
• Do not let the cord hang over the edge of a table or counter or touch a hot surface.
• Do not operate the appliance without anything in it to avoid damaging the heating elements.
• Ensure that the Tea Maker is used on a firm and flat surface out of reach of children, and not placed on or near a hot gas or electric burner or heated oven.
• To protect against fire, electric shock, or personal injury, do not immerse the cord, electric plugs, or kettle in water or other liquids.
• While water is boiling, or just after the water has been boiled, avoid contact with steam from the spout.
• Always take care to pour boiling water slowly and carefully without tipping the kettle too fast.
• Use the handle when moving the kettle. The lid, sides, and bottom may be hot.
• Extreme caution must be used when moving the appliance containing hot water.
• Be careful refilling the container if the Tea Maker is hot, as it may cause steam.
• This appliance can be used by children aged 8 years and above and people with reduced physical, sensory, or mental capabilities, or a lack of experience and knowledge, if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.
• Children should be supervised to ensure that they do not play with the appliance.
• To avoid water spilling over, do not detach the filter.
• The use of accessories that are not recommended by the appliance manufacturer may result in fire, electric shock, or personal injury.
• Unplug the kettle from the outlet when not in use and before cleaning. Allow the kettle to cool before putting on or taking off parts, and before cleaning the appliance.
• To disconnect, turn the control to “off,” then remove the plug from the wall outlet.
• The kettle can only be used with the stand provided.
• Always ensure the lid is closed and do not lift it while the water is boiling. Scalding may occur if the lid is removed during the brewing cycles.
• The Tea Maker is for household use only. Do not use outdoors.
• This appliance is intended to be used in household and similar applications, such as:
• Staff kitchen areas in shops, offices, and other working environments;
• By clients in hotels, motels, and other residential-type environments;
• Bed and breakfast type environments.
• The appliance and attached base cannot be used for anything other than their intended use.

NOTICE

This appliance has a grounding plug. To reduce the risk of electric shock, this plug will fit into a grounding outlet only one way. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.

Product Specifications

Diagram of Parts

Control Panel

Tips for First Use

Get Your Tea Maker Ready

If you are using this Tea Maker for the first time, it is recommended to fill and boil 57 oz (1.7 L, the maximum for boiling water), then drain the water one to two times before making tea.

NOTE

1. The minimum capacity is 17 oz (0.5 L of water). The maximum capacity for brewing tea is 34 oz (1.0 L), while the maximum capacity for boiling water is 57 oz (1.7 L).
2. Do NOT fill the water over the maximum level, or water may spill out of the spout when boiling.
3. The heating will slow down as it approaches the desired temperature to prevent overheating.

The Art of Steeping Tea

Great care is taken to create each tea’s unique character. When the temperature is suited to the particular tea and the steeping time is perfect, tea lovers can savor and appreciate all of the tea’s naturally aromatic flavors and health benefits. Refer to the chart below for our recommendations. You can also adjust to your personal preference. Enjoy!
For most teas, the best recipe is 1 teaspoon (about 6 g) of loose tea leaves or 1 teabag per cup (8 oz) of water. Some herbal blends can benefit from a bit more. When making a full pot, we suggest an extra teaspoonful or a tea bag.

The Health Benefits of Tea

Many kinds of tea are brimming with healthful benefits like natural vitamins, minerals, and antioxidants. Drinking any tea rehydrates the body, and its antioxidants may offer protection against a wide range of diseases. A cup of tea can be a gentle start to the day, a soothing mid-afternoon break, or a comfortable way to unwind and relax each evening—it all adds up to a healthy mind, body, and spirit.

Product Instructions

Get the Appliance Ready

1. Place the appliance on a flat surface.
2. Fill the kettle with the desired amount of water within the Min and the Max lines on the glass.
3. Ensure that the lids are well placed before inserting the power outlet. All indicators light up solidly for 3 seconds to let you know it is ready.
4. The LCD defaults with BREW TEMP 212°F and BREW TIME 3:00, the “Custom” on both sides, and the Keep Warm indicators are on.

Making Hot Water (Heat water up without a timer)

1. Set the desired temperature with the Temperature Arrow button (on the left side of the LCD) from 105°F to 212°F.
2. Press the Hot Water button; the appliance will heat the water to the preset temperature. The LCD will show the current temperature. During heating, the Keep Warm indicator light is also on. The appliance will automatically keep the water at 105°F–140°F for up to 30 minutes after heating water. You may hold the Keep Warm button for 1 second to cancel this function. NOTE: If the current water temperature is higher than the selected water-brewing temperature, the appliance will not heat.
3. Five beeps will be heard after the keep warm process ends. The appliance will shut off and enter sleep mode if there is no input within 5 minutes.
4. With the built-in memory function, you just need to press the Hot Water button twice (one for waking the appliance up another one for starting the heating) to heat the water to the temperature you preset last time (until the plug is unplugged).

Making Tea

1. Press the Tea Types button to select the corresponding type of tea and the Strength button to select the strength level for your tea. You can also customize your desired temperature with the Temperature Arrow button (on the left side of the LCD) and desired brewing time with the Time Arrow button (on the right side of the LCD).
2. Press the Tea button to start the tea brewing process. The LCD shows the current water temperature and the preset time.
3. When the water reaches the preset temperature, the tea basket will automatically submerge into the water to brew the tea, and the timer will start to count down. When the countdown is finished, the tea basket will emerge from the water, beep 3 times, then enter the Keep Warm process between 105°F and 140°F for up to 30 minutes.
4. You can press the Cancel button anytime to cancel the tea-brewing process.
5. Five beeps can be heard after the keep warm process ends. The appliance will shut off and enter sleep mode if there is no instruction within 5 minutes.
6. With the built-in memory function, you just need to press the Tea button twice (one for waking the appliance up, another one for starting the heating) to heat the water to the temperature you preset last time again (until the plug is unplugged).

Keep Warm

The Keep Warm function will keep the brewed tea or heated water warm between 105°F and 140°F for up to 30 minutes. This function will be activated automatically when the appliance connects to power, and its corresponding indicator will illuminate. Simply press and hold the Strength/Keep Warm button for 1 second to cancel, and hold for another 1 second to re-activate.

Setting the Delayed Start

1. With the kettle well placed on the control panel, press and hold the Delayed Start button for 2 seconds to enter the Delayed Start time mode. If there is no input for 5 seconds during Delayed Start set mode, or if you press the Tea Types or Strength/Keep Warm button, the appliance will automatically return to standby mode.
2. The Delayed Start button indicator will illuminate, and the Tea/Cancel and Hot Water button indicators will blink. The LCD screen will display the Delayed Start clock icon, with the current time and start time blinking.
3. Use the Temperature Arrow buttons to correct the current time. It uses 1-minute increments from 12:00 AM to 11:59 PM. Long-press and hold to scroll faster. Use the Timer Arrow buttons to set the delay timer. It uses 1-minute increments from 12:00 AM to 11:59 PM. Long-press and hold to scroll faster. The current time and the delay timer can be adjusted at the same time.
4. Once the current time and start time are programmed, press either the flashing Hot Water or Tea button to select the mode you would like to start at the programmed time. The indicators for selected functions (Delayed Start, Hot Water/Tea, and Keep Warm) illuminate. You may press the Tea/Cancel button to cancel the process anytime.
5. Once the current time matches the selected start time, the appliance will automatically start heating water or brewing tea.

Boil-Dry Protection

The appliance will automatically turn off if it is operated without water. After that, please let the appliance cool down for at least 15 minutes before the next use.

Cleaning, Care, and Maintenance

• Always disconnect the appliance from the power outlet and let it completely cool down before cleaning.
• Clean the bottom of the glass kettle and the control panel with a moist cloth as needed. Let them completely dry before using the appliance again. Never immerse them in water in case of electric shock. Do not use any corrosive cleaner, such as dish soap.
• Do not use chemical, steel, wooden, or abrasive cleaners to clean the outside of the kettle, or the glass may get scratched or cracked.
• The power cord can be stored underneath the power base when the tea maker is not in use.
• Remove the filter lid to clean by grasping and pulling upward. Clean it under running water and rub with a cloth or brush, then snap it back in place.
• Never immerse the kettle or power base in water. Any other servicing should be performed by an authorized service representative.

Removal of Mineral Deposits

• Your kettle should be periodically descaled, as the mineral deposits in tap water may form a scale on the bottom of the kettle. This buildup can negatively affect the efficiency of the kettle.
• You can use any commercially available descaler and follow the instructions on the package of the descaler. Alternatively, you may follow the instructions below using white vinegar.
• Add 25 oz (750 ml) of white vinegar and at least 70 oz (2000 ml) of water to cover the bottom of the kettle completely. Leave the solution in the kettle overnight. Do not boil this mixture.
• Discard the mixture in the kettle, refill the kettle with tap water to the MAX line (57 oz), boil and discard the water. Repeat several times until the odor of vinegar has been flushed away. Any stains remaining on the spout can be removed by rubbing with a damp cloth.

Troubleshooting

For More Details Visit: www.razorri.com.

For More Manuals By Razorri, Visit ManualsLibraryy.

Razorri PTK17A Electric Tea Maker- FAQs