Steamfast Virtuoso Handheld Garment Steamer Manual

Table of Contents

Steamfast Virtuoso Handheld Garment Steamer

IMPORTANT SAFETY INSTRUCTIONS

This owner’s guide and any additional inserts are considered part of the product. They contain important information about safety, use, and disposal. Before using the product, please familiarize yourself with all operating and safety instructions. Please keep all documents for future reference and pass these documents on, together with the product, to any future owner. See steamfast.com to view, download, and print the most current version of this owner’s guide.

INTENDED USE: This product is intended to be used indoors for garment steaming in the United States. This product is not intended for commercial or industrial use. The manufacturer assumes no responsibility for damage or injury due to unauthorized use or product modification. Failure to follow these directions will void the product warranty.

WARNING: Risk to Children and Impaired Persons. Supervision is required during the installation, operation, cleaning, and maintenance of this product by children 12 years of age and younger and anyone with reduced physical, sensory, or mental capabilities. Children should be supervised to ensure that they do not play with the appliance, its parts, or packaging material. Directions to reduce risk of fire, electrical shock, and injury:

INSTALLATION WARNING – To reduce the risk of fire, electrical shock, and injury to persons, observe the following: When using your appliance, basic precautions should always be followed, including the following:

Read all instructions before use.
Use the appliance only for its intended use.
To reduce the risk of electric shock, do not immerse the appliance in water or other liquids.
Never yank the cord to disconnect from the outlet; instead, grasp the plug and pull to disconnect.
Do not allow the cord to touch hot surfaces. Let the appliance cool completely before putting it away.
Always disconnect the appliance from the electrical outlet when filling with water or emptying, and when not in use.
Do not operate the appliance with a damaged cord, or if the appliance has been dropped or damaged. To reduce the risk of electric shock, do not disassemble or attempt to repair the appliance; take it to a qualified service person for examination and repair. Incorrect reassembly or repair could cause a risk of fire, electric shock, or injury to persons when the appliance is used.
To reduce the likelihood of circuit overload, do not operate another high-wattage appliance on the same circuit.
If an extension cord is necessary, a 15-ampere-rated cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that the cord cannot be pulled or tripped over.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
A loose fit between the wall outlet (receptacle) and plug may cause overheating and distortion of the plug. Discontinue use of the product in this outlet. Contact a qualified electrician to replace loose or worn outlets.
Wrap the cord with the supplied “hook and loop” fastener when storing.

SAFE USE WARNING – To reduce the risk of fire, electrical shock, and injury to persons, observe the following:

Close supervision is required for any appliance used by or near children. Do not leave the appliance unattended while it is connected.
Use caution when handling this steam unit. Burns could occur from touching hot metal parts, hot water, or steam. Use special care to avoid contact with hot water when turning the product upside down to empty the reservoir.
To reduce the risk of contact with hot water emitted from steam vents, check the appliance before each use by holding it away from the body and operating the Steam Button. Do not operate the unit if steam vents are blocked.
When filling the unit, only distilled water should be used; other cleaning agents could damage the unit or cause injury.
Do not attempt to use the unit without properly filling the water tank. To avoid burns from escaping steam when refilling the tank: Press and hold the Steam Button to release all remaining steam pressure and always allow the unit to cool before refilling.
Use caution when carrying the unit up stairs or over obstacles, or when using the unit on or near an uneven surface.
Burns can occur from touching hot plastic parts, hot water, or steam. Do not touch the Steam Nozzle. Use caution when you turn the unit upside-down; there may be hot water inside.
When steaming any fabric for the first time, it is recommended that you consult the manufacturer’s guidelines for the material being steamed. For items in question, test on an inconspicuous area before proceeding.
Synthetic materials (such as 100% nylon or polyester) are sensitive to heat and may be damaged by exposure to hot steam. Steam is recommended for use only on natural fibers such as cotton, linen, or wool, as well as nylon or polyester blends.
Do not use the unit where aerosol-based products are being used, or where oxygen is being administered.

SERVICING WARNING – To reduce the risk of fire, electrical shock, and injury to persons, observe the following:

If the Steam Status Light does not illuminate when the unit is plugged in, and the button is set to the “ON” position, the unit is not operating normally. Immediately disconnect the cord from the power supply, then refer to the troubleshooting guide on Page 9 of this manual for assistance.
Always allow the unit to cool (30 minutes for complete cooling) and empty the Water Tank before storing.
Clean your product regularly, only as instructed in this manual. Before cleaning, turn off the power to your product and unplug it. Do not use gasoline, thinners, solvents, ammonia, or other chemicals for cleaning. Refer to the cleaning instructions provided.

FEATURES

STEAM NOZZLE: Emits the flow of hot, penetrating steam.
HANDLE: Stays cool while providing maximum grip and comfort.
WATER TANK: Holds 10 oz (295 ml) of water.
ON/OFF BUTTON
STEAM STATUS LIGHT: Illuminates red while the steamer is heating and will illuminate green when ready to use.
STEAM BUTTON: Produces steam with the initial press of the Steam Button. To stop the product from emitting steam, press the Steam Button a second time.
AUTO SHUT-OFF (not shown): Release of the Steam Trigger Button starts a 20-minute timer so that the product automatically shuts off after 20 minutes unless the Steam Trigger Button is pressed again.

HOW TO USE

FILLING TANK WITH WATER

Turn OFF ( ) and unplug the unit from the power source.
Place the steamer on a flat, level surface. CAUTION: If the unit has been in use, allow it to cool (5 minutes minimum cooling before removing the Water Tank and adding water).
Remove the water tank by grabbing onto the sides and pulling outwards; see Figure 1.
Remove the rubber cap from the top of the Water Tank and fill with distilled water from a bottle or cup. Replace the rubber cap on top of the Water Tank. Do not overfill the water tank. NOTE: In order to minimize potential mineral build-up and prolong the life of your steamer, distilled or de-mineralized water is recommended when filling the reservoir.
Replace the water tank by pushing firmly into the unit.

WARNING – Take care not to pinch your fingers or hand when replacing the water tank into unit.

FABRIC STEAMING

CAUTION: When steaming any material for the first time, it is recommended that you test on a small inconspicuous area before proceeding. Do not use on synthetic fabrics such as 100% nylon or polyester, or other steam-sensitive materials.

NOTE: Be sure the Water Tank has already been filled before following these steps.

Plug the power cord into a standard electrical outlet.
Power on and wait approximately 30 seconds until the Steam Status Light turns from red to green, indicating the unit is ready to use.
Direct the steam nozzle towards the fabric material you wish to steam. See below for additional tips and procedures.

CAUTION: Always be sure that the Steam Nozzle is pointed in a safe direction (away from yourself, other people, pets, and plants) when steaming.

STEAMING GARMENTS:

Hang garment from a clean, rust-free hanger.
Direct the steam nozzle towards the bottom of the garment. Steam will rise along the inside and outside of the material, removing wrinkles. Slowly slide the Steam Nozzle upward from the bottom to the top of the garment.
Direct the steam nozzle away from the garment and smooth material with your free hand.
Repeat as necessary until the garment is fresh and wrinkle-free.

GENERAL STEAMING TIPS:

For the most effective results, hold the Steam Nozzle within 1/2” of fabrics or press it directly against surfaces.
Curtains and draperies can be steamed while still hanging.
To remove wrinkles from towels, handkerchiefs, and napkins, drape them over a rod or towel rack and gently steam them.
Heavier fabrics may require repeated steaming to achieve the desired results.
To remove exceptionally stubborn wrinkles, steam both sides of the fabric.
Be especially careful when steaming any delicate fabrics that may be damaged by heat or water spotting.
When you are finished using your steamer, immediately turn off and unplug the power cord from the electrical outlet. Refer to STORAGE & CARE for proper storage and maintenance procedures.

STORAGE & CARE

PROPER STORAGE

Preparing your steamer for storage is quick and simple. When you have completed your tasks, follow the steps listed below.

Push the Power ON/OFF Button (Steam Status Light will turn off) and unplug the power cord.
Allow the unit time to cool (at least 30 minutes).
Remove the water tank and drain any remaining water into a sink or tub to minimize potential mineral build-up. Replace the water tank when done.
Wrap the cord with the supplied “hook and loop” strap when storing. Do not wrap the cord around the product.
Store steamer in a cool, dry location.

MINERAL BUILD-UP

A common maintenance need for steam appliances is the removal of build-up caused by high mineral content in many municipal water supplies. This mineral build-up may cause the unit to spit water, limit the effectiveness, and reduce the life of your steamer.

The best way to minimize mineral build-up is to use distilled or de-mineralized water when using your steamer. In addition, it is recommended that the cleaning procedure below be followed at least once a month to remove any deposits that form. This mineral build-up may cause the unit to spit water, limit the effectiveness, and reduce the life of your steamer.

TO REMOVE MINERAL BUILD-UP:

Follow STEPS 1-3 under the Proper Storage section above. However, do not replace the Water Tank at the end of STEP 3.
Fill Measuring Cup (not included) with 1 oz (29.6 ml) distilled water and 1 oz (29.6 ml) vinegar.
Slowly pour water-vinegar solution into the Water Tank through Fill Hole, then replace Water Tank Cap.
Plug in the power cord and press the ON/OFF Button to turn the unit on. Once heated, press the Steam Button to allow the unit to produce steam for 1 minute, then turn the unit off.
Allow the unit to sit for approximately 30 minutes, then press the ON/OFF Button to turn the unit on again and repeat Step 4 above. Repeat until the remainder of the Water Tank’s contents are steamed out.
Once the water tank is drained, turn the unit off and refill the tank with 10 oz (295 ml) of fresh distilled water. Allow the unit to steam until the Water Tank is empty. Repeat as necessary until vinegar odor dissipates.
Turn the unit OFF, unplug the power cord, and store the steamer in a cool, dry location.

IMPORTANT: On average, it is recommended that you follow the mineral build-up removal procedure once per month (if the unit is used once every week). More frequent use may require following the procedure more often to keep your steamer operating at full potential. Do not exceed 1 hour of use without cleaning out mineral build-up.

TROUBLESHOOTING

WARRANTY

Steamfast, a division of Vornado Air, LLC, warrants to the original consumer or purchaser that this Steamfast (“Product”) is free from defects in material or workmanship for a period of one (1) year from the date of purchase. If any such defect is discovered within the warranty period, Vornado, at its discretion, will repair or replace the Product at no cost.

For warranty service: Call 1-800-711-6617 or email [email protected] to obtain a Return Authorization (“RA”). Please have or include your Product’s model number and serial number, as well as your name, address, city, state, Zip code, email, and phone number when contacting Vornado for warranty service. To file a contactless warranty claim, visit www.steamfast.com/contact.

After receiving the RA, ship your Product to: Vornado Air LLC, Attn: Warranty & Repair, 415 East 13th Street, Andover, KS 67002. For your convenience, please have your model number and serial number when contacting Vornado with service inquiries. To ensure proper handling, packages must be clearly marked with the RA number. Packages not clearly marked with the RA number may be refused at the receiving dock. Please allow 2–3 weeks for warranty service and return of your Product after the Product is received.

This warranty does not apply to defects resulting from abuse of the Product, modification, alteration, mishandling, improper maintenance, commercial use, or repair or service of the Product by anyone other than Vornado; damages which occur in shipment or are attributed to acts of God. Improper product use, which includes using an external device that alters or converts the voltage or frequency of electricity, or shipping a Vornado product to a country not intended for use, will void all warranties. Any unauthorized product modification, repair by an unauthorized repair center, or use of non-approved replacement parts is not recommended, and any consequences will not be covered by support services or product warranties.

The product warranty will be honored only on models that are being used in the country for which it is intended. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. VORNADO SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state. The manufacturer assumes no responsibility for damage or injury caused by failure to follow these instructions, improper product use, or unauthorized product modifications. Any such actions will invalidate the product warranty.

All company names and product names are trademarks of their respective owners. © All rights reserved. All technical information, data, and instructions for the installation, connection, and operation contained in these instructions for use correspond to the latest available information at the time of printing. The contents of this manual may differ slightly from the actual product. Observe any additional supplements. © 2023 Vornado Air, LLC. Andover, KS 67002, U.S. Specifications subject to change without notice. Steamfast® is a trademark owned by Vornado Air, LLC. Manufactured in China.

For More Manuals By Steamfast, Visit ManualsLibraryy.

Steamfast Virtuoso Handheld Garment Steamer-FAQs

How long does the Steamfast Virtuoso Handheld Garment Steamer take to heat up?

The Steamfast Virtuoso handheld steamer warms up very quickly, reaching steaming temperature in about 30 seconds after being plugged in and turned on. A status light typically switches from red to green to indicate that the unit is ready to use, allowing you to start steam-ironing clothes within moments rather than waiting for a long preheat period.

How much steam time does the Virtuoso provide on a full water tank?

With its 10-ounce removable water tank, the Steamfast Virtuoso handheld garment steamer delivers around 15 minutes of continuous steam before needing a refill. This duration is usually sufficient for steaming several garments like shirts, dresses, or light fabrics in one session.

What fabrics can you safely steam with the Virtuoso?

The Virtuoso steamer works well on natural and blended fabrics such as cotton, linen, wool blends, and some synthetics. Because steam is gentler than direct heat from an iron, it’s excellent for fabrics that wrinkle easily. Always check the garment care label and test a small area first, as extremely delicate materials can be sensitive to heat and moisture.

How do you use the Steamfast Virtuoso handheld steamer on clothing?

To steam garments, hang them on a hanger and point the steam nozzle toward the fabric. Begin at the bottom and move the steamer upward in slow, steady motions so the steam penetrates and relaxes wrinkles. Keep the nozzle a short distance from the fabric for best results and avoid holding it in one spot too long.

Is the Virtuoso handheld steamer suitable for travel?

Yes, the Steamfast Virtuoso handheld steamer is compact, lightweight, and portable, making it a solid choice for travel or quick touch-ups at home. Its short heat-up time and relatively long steam duration for its size mean you can freshen outfits on the go without lugging a full-size iron or steamer.

What safety features does the Virtuoso include?

The Virtuoso handheld steamer is equipped with a 20-minute automatic shut-off that activates when steam is continuously produced, helping prevent overheating. Additionally, a built-in status light shows when the unit is hot, and users are advised to avoid touching the steam nozzle or hot surfaces to prevent burns.

How do you fill and maintain the water tank?

Before filling, unplug and let the unit cool. Remove the water tank and open the cap to fill it with water; distilled or de-mineralized water is recommended to minimize mineral buildup. After filling, replace the cap securely and insert the tank back into the unit. Regularly draining and using distilled water helps maintain steam quality.

How can you reduce mineral buildup in the Virtuoso steamer?

To reduce mineral buildup that can affect performance, use distilled water instead of tap water whenever possible. If buildup occurs, follow the manufacturer’s cleaning instructions, which generally involve flushing with a water-and-vinegar solution and then steaming out the mixture. This keeps the steam flow consistent and prolongs the steamer’s lifespan.

Can the Steamfast Virtuoso remove odors from fabrics?

While its primary function is wrinkle removal, the high-temperature steam can also help refresh fabrics and reduce light odors because heat and steam loosen trapped particles. It’s not a full deodorizing treatment like washing, but many users find that steam helps freshen items between washes.

How powerful is the Steamfast Virtuoso compared to other handheld steamers?

The Steamfast Virtuoso packs about 1000 watts of power into its handheld design, which is relatively high for this category. This robust power output helps it produce steady and strong steam, making it more effective than some lower-wattage handheld models for tackling wrinkles and refreshing fabrics.

Steamfast Virtuoso Handheld Garment Steamer Manual Download

Steamfast Virtuoso Handheld Garment Steamer Manual

Steamfast Virtuoso Handheld Garment Steamer