Raycon Everyday Bone Conduction Headphones
INTRODUCTION
Introducing your new Bone Conduction Headphone – an audio companion as strong as you are. At Raycon, we believe in creating innovative tech designed to embrace and empower your everyday. We’ve teamed up with expert engineers, leading taste-makers, and platinum artists to design wireless audio you’ll love to use and everyday tech that can take whatever life throws your way.
We believe in the early risers and the one-more-milers of the world. Premium audio, inspired by you. To get the most out of your Bone Conduction Headphones, we strongly encourage you to fully read through this user guide. You can also visit our support center at www.rayconglobal.com/support. This web page has more specific guidelines and helpful videos for you to navigate your product. For best performance, charge fully before first use.
WHAT’S IN THE BOX
UNIT AT A GLANCE
FUNCTIONS / TOUCH CONTROL
USING YOUR HEADPHONES
CONNECTING VIA BLUETOOTH
- Long-press the “M” power button for two seconds, the headphone will turn on and enter pairing mode while blinking red and blue LED lights. Your Raycon Bone Conduction Headphones should appear in the list of available devices.
- Select “Raycon Bone Conduction Headphones” from the list of available devices. If prompted, confirm the pairing request. The LED indicator on your Raycon Open Headphones will stop blinking, indicating a successful connection. You will hear a voice prompt or tone confirming the successful connection.
CHARGING YOUR DEVICE
- Connect the Magnetic Charging Cable: Align the magnetic charging cable with the charging pins on the Bone Conduction Headphones. The magnets will help the cable snap into place correctly. The cable will only attach in one direction. If it doesn’t snap into place easily, flip the cable and try again.
- Plug into a Power Source: Plug the USB end of the charging cable into a USB power source, such as a computer, USB wall adapter, or power bank.
- Ensure the power source is reliable and functional. 1. 2. Ensure Proper Connection: Confirm that the magnetic charging cable is securely attached to the device and the USB end is properly connected to the power source. Afterwards, the LED on the headphone will turn solid red. Once fully charged, the LED will turn solid blue.
- Charging Duration: Allow the Bone Conduction Headphones to charge for approximately 1.5 to 2 hours.
Note: If the charging contacts become wet, gently dry them with a soft, dry towel. Allow the headphones to air dry at room temperature until no moisture remains. Always ensure the charging port is completely dry before connecting the charging cable. Failure to do so may increase the risk of short circuits, fire, or explosion hazards.
LED STATUS
HEADPHONE LED
CHOOSING THE RIGHT STYLE
ADVANCED FEATURES
MULTIPOINT
WHAT IS MULTIPOINT?
MultiPoint allows you to connect your headphone to up to two devices simultaneously, such as your smartphone, laptop, or tablet – the combinations are endless! This means you can easily switch between devices without having to disconnect and reconnect each time. Once you have paired your Open Headphones with both devices, they will automatically switch to whichever device is playing audio. With Multipoint, you can connect your headphones to both your phone and your laptop, allowing you to easily switch between your workout playlist and work calls without any interruptions.
HOW DO YOU SET UP MULTIPOINT?
To use this feature, make sure both devices are within Bluetooth range and have Bluetooth enabled.
- Pair the headphone with your first device (e.g., your smartphone).
- Disconnect the headphone from your first device using the Bluetooth settings on the device. The headphone will re-enter Pairing Mode.
- Pair the headphone with your second device (e.g., your laptop) via its Bluetooth settings.
- Turn off the headphones and wait for 5 seconds to turn them back on.
- The headphone will now be able to connect to both of your devices when turned back on.
TROUBLESHOOTING/FAQ
BLUETOOTH CONNECTION/SOUND INTERFERENCE:
- Ensure the headphones are within 10 meters (33 feet) of the connected Bluetooth device.
- Check the battery level: If the battery level of either the headphones or your connected device is low, it can cause the connection to be weak or to drop.
HEADPHONES WILL NOT CHARGE:
- Check Connections: Ensure all connections are secure and properly aligned.
- Use a Different Power Source: Try plugging the USB end of the charging cable into a different USB port or power adapter.
- Inspect the Cable: Check for any damage to the charging cable. If the cable is damaged, replace it with a new one. Please contact Raycon Customer Support.
- Clean the Charging Pins: Gently clean the charging pins on the device and the magnetic charging cable with a dry cloth to ensure a good connection.
MULTIPOINT IS NOT WORKING:
- Confirm headphones are charged and that they are disconnected from any Bluetooth device.
- Confirm headphones are in pairing mode and reconnect devices to Bluetooth.
HEADPHONES NOT CHARGING:
- Check the connections and ensure the magnetic charging cable is securely attached to the device.
- Try using a different USB port or power adapter.
- Inspect the charging cable for any damage. Replace the cable if necessary.
SAFETY & WARRANTY
SAFETY GUIDELINES
- Be wary of any edges, uneven surfaces, and metal parts, including on accessories and product packaging, to prevent any possible injury or damage.
- Listen to music at a proper volume to avoid damaging your hearing and earbuds.
- Do not store in high temperatures, such as in a hot vehicle or in direct sunlight.
- Do not expose the earbuds or any of their supplied parts to rain or other liquids for extended periods of time.
- Do not drop or cause undue impact to the earbuds.
- Do not modify, repair, or dismantle the product on your own.
- Do not use any diluent or volatile liquid to clean the product.
- Do not use the product in a hazardous location.
- Ensure all port covers are securely closed if exposing the charging capsule to liquid.
- Do not expose the headphone to water while charging, as doing so may result in damage to the speaker or the power source.
- When cleaning these headphones, use a soft dry cloth. For more severe stains, dampen the cloth with water only. Anything else increases the chance of dissolving the paint or damaging the plastic.
SUPPORT
If your device is not functioning properly, please visit www.rayconglobal.com/support for customer support, and we will be more than happy to help you.
LIMITED WARRANTY
Your Bone Conduction Headphones are covered by a limited warranty. Please visit our website at www.rayconglobal.com/warranty for more details.
COMPLIANCE & REGULATORY INFORMATION
FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- The device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Those limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure statements. The device can be used in portable exposure conditions without restriction.
IC WARNING
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
RF EXPOSURE STATEMENT:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Specification
For More Manuals By Raycon, Visit ManualsLibraryy.
Raycon Everyday Bone Conduction Headphones-FAQs
What are Raycon Everyday Bone Conduction Headphones, and how do they work?
Raycon Everyday Bone Conduction Headphones use vibration technology to transmit sound through your cheekbones directly to the inner ear, bypassing the eardrum. This open-ear design keeps your ears uncovered, allowing you to stay aware of your surroundings while listening to music or calls.
Are Raycon bone conduction headphones good for workouts and outdoor activities?
Yes, they are designed with an open-ear fit and water-resistant build, making them suitable for running, cycling, and gym workouts. The IP-rated protection helps them handle sweat and rain, while the secure fit keeps them stable during movement and physical activity.
How is the sound quality compared to regular headphones?
The sound quality is clear and balanced for everyday listening, but it differs from traditional in-ear or over-ear headphones. Since the ears remain open, bass may feel lighter, but clarity and environmental awareness make them ideal for safety-focused listening scenarios.
What is the battery life of Raycon Everyday Bone Conduction Headphones?
These headphones offer up to 13 hours of continuous playback on a single charge. This battery life is sufficient for a full day of casual use, workouts, or commuting, reducing the need for frequent recharging during regular daily activities.
Are these headphones comfortable for long-term use?
Yes, they are built with a lightweight and ergonomic frame designed for extended wear. Because they don’t sit inside the ear canal, users often experience less ear fatigue, making them comfortable for long listening sessions, workdays, or outdoor use.
Do Raycon bone conduction headphones block outside noise?
No, they are intentionally designed not to block external sounds. The open-ear concept allows you to hear traffic, conversations, and surroundings while listening to audio, making them safer for outdoor environments but less suitable for noise isolation.
Are Raycon Everyday Bone Conduction Headphones waterproof?
They feature a high level of water resistance, often rated for protection against sweat, rain, and splashes. This makes them reliable for workouts and outdoor conditions, although they are not typically intended for full underwater use or swimming.
Can you take calls with these headphones?
Yes, they include built-in microphones that allow you to handle calls hands-free. The open-ear design also helps you stay aware of your environment while talking, which can be useful during commuting, working, or multitasking throughout the day.
Are Raycon bone conduction headphones suitable for people with sensitive ears?
They can be a good option for users who find traditional earbuds uncomfortable. Since they rest outside the ears and don’t require insertion, they reduce pressure in the ear canal, making them more comfortable for people with sensitivity or prolonged listening needs.
Are Raycon Everyday Bone Conduction Headphones worth buying?
They are a solid choice for users who prioritize comfort, safety, and awareness over deep bass or noise isolation. While they may not replace premium audio headphones, they provide a practical and convenient solution for workouts, commuting, and everyday listening needs.