LIFX Outdoor SuperColor Spot Light Manual

LIFX Outdoor SuperColor Spot Light

Get started

Get me set up quick!

Ok, here’s the basics of what we’re going to do…

Ok, so how do I put it all together?

We’ll explain quickly how.

Time to attach the light.

Whichever base you’re using, it’ll work the same way.

Cautions:

(i.e., super important stuff.)

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

• Connect this product ONLY to a 12V low-voltage system with appropriate Wattage allowance available.
• Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
• Do not secure the wiring of the product with staples, nails, or sharp hooks. DO NOT DAMAGE THE WIRE.
• Do not use the product for anything other than its intended use.
• Do not cover the product with cloth, paper, or any material not part of the product when in use.
• Keep lamps away from any combustible surface.
• Read and follow all instructions that are on the product or provided with the product.
• This product should be installed out of the reach of children.
• Do not bury the wire more than 6″ underground.

Warning:

1. To avoid risk of shock, always make sure the product is disconnected from power before assembling, disassembling, installing, relocating, servicing, or cleaning it.
2. Do not overload. Check that the Watts used by this product are within the load limit of your transformer.
3. Make sure all connectors are tightly secured to prevent water entry. Do not submerge.
4. The instructions in this manual are not intended to cover every possible installation, operation, maintenance, or mounting situation.

Your Wi-Fi:

LIFX lights connect to your 2.4 GHz Wi-Fi frequency network, which all routers can be set up for. This offers a better range and stability for devices. You may also have a 5 GHz connection, so if you’re not sure which is which, check the current Wi-Fi you’re connected to by pressing the Wi-Fi icon on your phone while connected, and look at the listed details to find the frequency.

Connection troubles?

Wi-Fi waves can be interrupted by materials like concrete or mirrors. If your signal is weak, try moving your product near your router for setup, as it will need a stable connection to complete. If you have lots of devices connected to your router, check the recommended amount. Some routers can handle many devices, others can only support a few.

Quick FAQS

How do I reset a light if I need to?

To take a light back to its original settings, unplug and replug the LIFX Connector 5 times, at a rate of about one time a second. The lights will cycle through four colors and stop on white when the reset has been successful. This is how you would remove a light from a network to then add it to a new one.

I’ve set up a new network / changed my password. How do I reconnect my lights?

If you’ve changed your Wi-Fi password or set up a new router with a new password, you’ll need to reset your lights (as above) and reconnect them with the new Wi-Fi information and security. If you’ve moved house but your network is named the same and has the same password, your lights are all ready to go!

Need more help?

Visit the LIFX Help Center at support.lifx.com.

Regulations & Compliance.

FCC Compliance Statement U.S. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may interfere with radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not approved by LIFX can void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Contains FCC ID: SYW-LCM4

Changes & modifications:

Changes or modifications made to this device may void certification of the device. Changes or modifications made to this unit not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.

Frequency Information:

• Frequency Range (US & Canada): 2412-2472 MHz;
• Maximum radio-frequency power transmitted: 22.50dBm;
• Modulation type: IEEE 802.11 b/g/n/ax

Installation requirements & recommendations:

This device should only be installed in light fittings and fixtures that are designed to accept each fitting. Lamps, fittings, and fixtures that are designed to accept smaller or lower-wattage light bulbs may result in the LIFX bulb operating below its optimal capacity. For optimal performance, it is recommended that LIFX bulbs be fitted into fixtures that provide sufficient air flow through and around the bulb.

It is recommended that the LIFX bulb be installed away from other devices designed to receive or transmit radio signals. It is recommended that LIFX bulb/s be installed and operated at a minimum distance of 30 cm from the body. For lamps with a weight significantly higher than that of lamps for which they are a replacement, attention should be drawn to the fact that the increased weight may reduce the mechanical stability of certain luminaires and may impair contact making and lamp retention.

Interference:

LIFX has been designed to minimize interference with other radio, broadcast, or receiving devices. The manufacturer is not responsible for any interference caused as a result of modifications to the product or by failure to adhere to the recommendations in this document and at support.lifx.com.

This device generates radio frequency energy and, if not installed in accordance with the “recommended installation requirements,” may cause harmful interference to radio communication devices. If the device is causing radio interference, it is recommended that the user try: a. relocating the device to a different place; b. Adjust the antenna on the receiving device; c. consult a technician experienced in radio interference.

Notices

• This device is not intended for use with emergency exits
• Only use the control provided with or specified by these instructions to control this lamp. This lamp will not operate properly when connected to a standard (incandescent) dimmer or dimming control.

LIFX is not designed for use in:

• Excessively hot environments (e.g., close to ovens, radiators, heaters, etc.)
• Regions or countries other than those in which the product was intended
• Outdoor and wet areas, except where the LIFX Product specifies that it is for Outdoor use.

When using LIFX:

• To avoid risk of shock, always make sure the product is unplugged from the electrical outlet before assembling, disassembling, installing, relocating, servicing, or cleaning it.
• Do not open the device, as this will void the warranty
• If cleaning the product, use a soft dry cloth; do not use cleaning agents

Limited Warranty

General:

Feit Electric Co (“LIFX”) warrants the LIFX bulb (the “Product”), and only the Product, against defects in materials and workmanship under normal use (“Defect”) for a period of TWO YEARS (730 days) from the date of retail purchase by the original purchaser (“Warranty Period”). Under this Limited Warranty, if a defect arises and a valid claim is received by LIFX within the Warranty Period, at its option and to the extent permitted by law,

LIFX will either:

1. Repair the Product at no charge, using new or refurbished replacement parts, or
2. Exchange the Product with a new or refurbished Product. In the event of a defect, to the extent permitted by law, these are your sole and exclusive remedies. A replacement Product or part assumes the remaining warranty of the original Product or ninety (90) days from the date of replacement or repair, whichever is longer. When a Product or part of the Product is exchanged, any replacement item becomes your property, and the replaced item becomes LIFX‘s property. Parts provided by LIFX in fulfillment of its warranty obligation must be used in Products for which warranty service is claimed.

Exclusions & Limitations:

This Limited Warranty applies only to the Product manufactured by or for LIFX that can be identified by the LIFX trademark, trade name, or logo affixed to it. The Limited Warranty does not apply to any (a) LIFX products and services other than the Product, (b) non-LIFX hardware product, (c) consumables (such as batteries), or (d) software, even if packaged or sold with the Product or embedded in the Product. Refer to the licenses accompanying the software for details of your rights with respect to its use. LIFX does not warrant that the operation of the Product will meet your needs or requirements or be uninterrupted or error-free.

LIFX is not responsible for damage arising from failure to follow instructions relating to the Product‘s use or from failures resulting from inadequate electrical supply or internet access. This warranty does not apply to a Product or part of the Product that has been altered or modified (e.g., to alter functionality or capability) by anyone who is not a representative of LIFX or if the Product is inserted or installed in a casing not provided by LIFX.

In addition, this Limited Warranty does not apply to Defects or damage caused by (a) use with non-LIFX products; (b) accident, abuse, misuse, flood, fire, earthquake or other external causes or abnormal conditions; (c) operating the product outside the permitted or intended uses or conditions described by LIFX or with improper voltage or power supply; or (d) service (including upgrades and expansions) performed by anyone who is not a representative of LIFX. Recovery and reinstallation of software programs and user data are not covered under this Limited Warranty.

This Limited Warranty does not cover the cost of returning the Product to LIFX; this is your responsibility. No LIFX reseller, agent, or employee is authorized to make any modification, extension, or addition to this Limited Warranty. If any term is held to be illegal or unenforceable, the legality or enforceability of the remaining terms shall not be affected or impaired.

EXCLUSIVE WARRANTIES:

THE WARRANTIES SET FORTH HEREIN ARE THE EXCLUSIVE WARRANTIES PROVIDED BY LIFX, AND EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED WARRANTIES (INCLUDING WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NONINFRINGEMENT) ARE HEREBY EXCLUDED.

LIMITATION OF DAMAGES:

EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, LIFX SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY USE OF THE PRODUCT OR BREACH OF EXPRESS OR IMPLIED WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY. LIFX’S LIABILITY FOR DAMAGES RESULTING FROM ANY USE OF THE PRODUCT OR BREACH OF EXPRESS OR IMPLIED WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY, WILL BE LIMITED TO THE ORIGINAL COST PAID FOR THE DEFECTIVE PRODUCT.

Consumer Protection:

Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

Governing Law and Arbitration:

This Limited Warranty shall be governed by the laws of the State of California without giving effect to any conflict of laws principles that may provide the application of the law of another jurisdiction and without regard to the Convention on Contracts for the International Sale of Goods. Any claim or dispute in connection with this Limited Warranty shall be resolved cost-effectively through binding non-appearance-based arbitration.

The arbitration shall be initiated through an established alternative dispute resolution provider mutually agreed upon by the parties. The alternative dispute resolution provider and the parties must comply with the following rules: a) the arbitration shall be conducted by telephone, online, and/or be solely based on written submissions; the specific manner shall be chosen by the party initiating the arbitration.

b) the arbitration shall not involve any personal appearance by the parties or witnesses unless otherwise mutually agreed by the parties; and c) any judgment on the award rendered by the arbitrator may be entered in any court of competent jurisdiction. If the foregoing arbitration clause does not apply for any reason, you agree to submit to the personal jurisdiction of the state courts located within San Francisco County,

California, and the federal courts in the Northern District of California for the purpose of litigating all such claims or disputes, which courts shall have exclusive jurisdiction of such claims or disputes. Notwithstanding the foregoing, LIFX may seek injunctive or other equitable relief to protect its intellectual property rights in any court of competent jurisdiction.

For More Manuals By LIFX, Visit ManualsLibraryy.

LIFX Outdoor SuperColor Spot Light-FAQs