Tzumi InteliGRIP Smart Dash Auto Wireless Charging Mount
PACKAGE CONTENTS
- 1 x InteliGrlp Wireless Charging Cradle Dock
- 1 x Suction Cup Mount
- 1 x Fastener
- 1 x USB-A to Type-C Charging Cable
PRODUCT FEATURES
- 01 Wireless charging phone mount designed to charge smartphones at 5W Capacity.
- Provides a full 360′ rotation of viewing angles, allowing you to mount it freely on your dashboard or windshield using the suction cup base, or from any air vent with the convenient air vent cup included with the product.
- Your phone begins to charge instantly once docked, so all you need to do Is place your phone in the bracket and drive.
- Support for an adapter with an output capacity of 5V12A 9V/1.67A QC 3.0
- Compatible with the iPhone X. iPhone 8. iPhone 8 Plus, Samsung Note 8, Samsung Galaxy S8, Samsung Galaxy S9, and other wireless charging capable smartphone models.
PRODUCT LAYOUT
TIPS FOR APPLICATION/USE
- Avoid contact with any credit cards you might have or cards With magnetic strips or chips. If the InteliGrip comes into contact with the card, demagnetization may occur.
TIPS FOR INSTALLATION
- Choose where you plan to Install your IntellGrip, by connecting the cradle dock to the mount, then apply the suction cup base to your windshield.
- Insert the fastener into the ball joint adapter. Insert the ball into the socket located on the back of the InteliGrip bracket and tighten it (angled to your desired position).
- When you have determined a safe viewing position, firmly press on the suction cup base or tighten the cup accordingly. The suction cup should only be affixed to smooth, clean surfaces. Rougher surfaces may render the base suction cup ineffective.
TIPS FOR CHARGING
- Connect the InteliGrip by attaching the included Type-C-USB charging cable to your vehicle’s USB Port or external DC power source.
- Place your Qi-compatible wireless charging mobile phone into the cradle near the top of the infrared sensor (see diagram). The bracket arms will automatically open when you do this. Place your phone in the open bracket against the Qi wireless charging area, and you will see the arms close tightly around your device. The wireless charger has now locked and has automatically entered the charging state. You will see the LED glow a solid red while the phone charges. You may also connect a USB charging cable to the USB port on the bottom of the InteliGrip head If you wish to charge a device that requires a wired connection.
TIPS FOR APPLICATION/USE (Cont.)
- When your phone Is fully charged, the LED Indicator light will emit a solid blue light.
- When you are ready to remove your phone, gently tap the “touch key” on the left side Of the unit with your finger and the bracket arms will release automatically. Be sure to hold your hand out underneath the phone as It releases; It will drop when the bracket arms release their grip.
LED FUNCTIONS
SPECIFICATIONS
- Input: 5V12A 1 9V/1.67A
- Output Power: IOW (Max)
- Receiver Distance: 0-10mm
- Working Frequency: 110-205KHz
- Power Conversion: 72% (Max)
SAFETY PRECAUTIONS
- Carefully Inspect your charger before attempting to use it for the first time.
- Do not attempt to pierce, strike, or apply strong pressure with sharp or heavy objects. Strong impacts or shocks could cause irreversible damage to the unit.
- Do not operate the charger if It has been exposed to any liquid or if It is visibly wet or moist.
- Do not charge devices while unattended.
- Keep the charger away from small children at all times.
- Always remember to unplug from your DC outlet when not using the charger.
- Do not expose the charger or any electrical parts to extremely high or extremely low temperatures or high pressure. Do not expose the charger to fire. direct sunlight, or other hot locations. This may cause the unit to generate heat, ignite, or explode. Using the charger in this manner may also result in a loss of performance and a shortened life expectancy.
- Do not attempt to disassemble or modify the InteliGrlp charger In any way Immediately discontinue the use of the charger if it has any visibly exposed parts or appears defective in any way.
- If this does occur, isolate the charger in a safe place and contact the tzumi Customer Support Team at tzumi.com/support.
For more manuals by Tzumi visit, ManualsLibraryy
Tzumi InteliGRIP Smart Dash Auto Wireless Charging Mount-FAQs
How do I use the Tzumi wireless charger?
Place the wireless charging pad on a flat, sturdy surface. Once plugged in, the LED will flash red and green quickly, indicating the charger is powered on. Then, simply place your device directly on the charging pad.
How do I know if my wireless charger is charging?
When charging begins, you will see a charging pop-up and hear a sound on your device. The battery icon will change to the charging symbol, and the device’s LED will turn red. The charging pad’s LED will glow blue.
How do I activate my wireless charger?
Simply place your device on the wireless charger. Fast wireless charging will automatically activate if the charger supports it. The indicator light may behave differently depending on your device or charging cover.
How do I use a Tzumi portable charger?
Connect the original cable from your device to the PocketJuice charger’s USB port. The charging process will begin, and the LED indicators will show the power level.
Does the wireless charger turn off when the device is fully charged?
Yes, your phone will stop charging once it’s fully charged, just like it does when using a cable. It’s safe to leave it charging overnight as the phone prevents overcharging.
Why is my phone not charging on the wireless charger?
There could be several reasons: an unstable connection, a phone case interfering, or using a charger that isn’t compatible with your device. Ensure proper alignment and compatibility.
How do I check if Qi is enabled on my phone?
To confirm wireless charging compatibility, check your phone’s specifications on the manufacturer’s website or user manual. Look for the Qi wireless charging logo on your device or its packaging.
What powers a wireless charger?
Wireless chargers use electromagnetic resonance. Energy is transferred between two coils at the same frequency, creating an oscillating electromagnetic field that powers your device.
What is a charging module?
A charging module uses an electromagnetic field to wirelessly transfer energy from the charging station to your device, providing power to charge batteries or operate the device.
What is the principle of a portable mobile charger?
A portable charger converts AC (alternating current) to DC (direct current) and steps down the voltage to provide 5V output, which is required for charging smartphones.