Arctic Air Evaporative Air Cooler User Guide

Arctic Air Evaporative Air Cooler

WHAT’S INCLUDED:

WARNINGS:

• Do not carry Arctic Air™ when filled with water. Some water may remain in the unit even if the tank is empty.
• Use only clean water. If needed, use distilled water.
• Please read and follow regular maintenance as recommended in the “Maintenance” section of this guide.
• Arctic Air™ works best in non-polluted areas. Large dust/dirt particles may reduce the lifetime of the unit.
• We recommend use only in dry locations. If using in a moist area or environment, take care not to get water on external areas of the product.
• If a leak or spill occurs on the surface of the device, unplug Arctic Air™ and let it dry for 24 hours. Then, use it as normal.
• Do not place in direct sunlight for extended periods of time.
• Before not using Arctic Air™ for extended periods of time, empty the water tank, turn the unit on and set it to the highest fan speed for at least 4 hours. This will dry out then filter and inside of your unit.
• Only use the original power adapter and cord supplied in the package.
• Do not touch the power supply or power cord with wet hands.
• Unplug Arctic Air™ when cleaning, removing/replacing the filter, or moving the device.
• For best results, place Arctic Air™ on a higher surface like a table or countertop.
• Do not place Arctic Air™ near a heater or any electrical equipment.
• Do not place the device in passageways or high-traffic areas where there is a possibility of tripping or knocking it over.
• Do not allow any foreign objects inside Arctic Air”‘.
• Do not place items on top of Arctic Air™.
• Do not block the device’s front and back grills.
• Do not turn the device upside down.
• Do not submerge the Arctic Air™ under water or other liquids.
• Do not place Arctic Air™ near open flames or fire sources.
• People with limited physical, visual, or mental abilities or lacking proper experience and/or knowledge should never use the device without the supervision of those responsible for their safety or those capable of assistance in using the device.
• The device can be switched off completely only when disconnected from the power supply.
• The manufacturer does not bear any responsibility for any damage from failure to comply with this product guide.
• A replaceable water filter is designed specifically for this product. If your cartridge has been broken or damaged, you can purchase a replacement.

MAINTENANCE:

We recommend cleaning the water tank and inside of the unit once weekly. Use only a non-abrasive cloth and mild dish soap when needed. For best-continued results, we recommend changing the filter every 6 months. To purchase filters, visit www.ArcticAirFilter.com, call 844-260-1487, or e-mail arcticaircs@worldpackusa.com.

CHANGING THE FILTER:

The water Filter should be changed every 6 months, or when you feel Arctic Air™ is not functioning as it should be. The Water tank will light up AMBER until the filter is reset. To reset the filter, hold the and– button for 3 seconds until the tank is not AMBER anymore. To purchase a replacement filter visit www.ArcticAirFilter.com, call 844-260-1487, or e-mail arcticaircs@worldpackusa.com.

1. Unplug Arctic Air™ from the wall.
   

   

2. Gently press the release tab on the bottom of the front grill and pull the grill down and away from the unit. Place aside. (See Fig 8)
   

   

3. Grab onto the filter and carefully slide out of the unit completely. (See Fig 9)
   

   

4. Place the new filter in Arctic Air™ as shown by the markings on the filter. (See Fig 10)
   

   

5. Insert the top tab of the front grill into the slot, and press the release tab back into place. (See Fig 11)

USAGE:

1. Press the Power button to power on Arctic Air™. (See Fig 4)
2. Set the Fan speed by pressing thebutton. You can choose from Low, Medium, and High Mode. The indicator lights next to the button show you which speed Arctic Air™ is currently running. (See Fig 5)

1. Choose your light color by pressingbutton. You can choose between solid colors or a color cycle mode. (See Fig 6). COLOR ORDER: Blue, Red, White, Teal, Purple, Yellow, Green, Color Cycle
2. Choose your light brightness by pressing and holding thebutton for 3 seconds – the tank will blink. Repeatedly press thebutton to choose between High, Medium, and Low, then stop. The tank will blink after 3 seconds to confirm setting has been locked in.
3. Adjust airflow direction up or down by using the Vent Adjust Tab on the front grill (See Fig 7).
   • Down Position – Air flows up
   • Center Position – Air flows straight out
   • Up Position – Air flows down
4. When you’re done, press the Power button again to turn off your Arctic Air™.
   NOTE: We recommend running Arctic Air ™ on HIGH mode for at least 5 minutes before powering off to allow for drying.

LOW WATER:

When the water level is low, the water tank will blink 3 times every 60 seconds in AMBER color. When the tank is filled again, the light will function as normal again.

TIPS:

• Place Arctic Air™ on a raised surface such as a table, desk, or countertop. This is the best way to cool your personal area faster.
• Let the filter absorb water for at least 3 minutes after filling the tank and before use. Doing so will get you the coolest air quicker.
• Try to stay within a few feet of Arctic Air™. You’ll feel the most benefit when sitting directly in front.
• Arctic Air™ will run for approximately 8 hours on a single fill on Low fan speed. Even if the water tank is empty, the filter is still damp and Arctic Air™ is still cooling.

SETUP:

1. Place Arctic Air™ on a flat surface. (See Fig 1)
2. Open the water tank door and fill it with water (See Fig 2). We recommend a pitcher or measuring cup.
3. Plug the USB power adapter into an outlet. Then, insert the larger USB end of the cable into the adapter and the smaller end into the power port on the back of Arctic Air™. (See Fig 3)

NOTE: You can plug the larger USB end into a computer to power Arctic Air”‘ as well.

For more manuals by Arctic Air, visit ManualsLibraryy

Arctic Air Evaporative Air Cooler-FAQs