i-box Dawn Bedside Alarm Clock User Manual

i-box Dawn Bedside Alarm Clock

Box Contents

i-box Dawn Bedside alarm clock with wireless charging

DC power adaptor

Top Panel

Controls & Features

1. Wireless charging location
2. Previous song/ Down button
3. Play/Pause
4. Next song/Up button
5. Snooze/Sleep/Dimmer
6. Volume down/ Alarm set
7. Volume up/Clock Key
8. Stand by mode/ Function key
9. USB Charging port
10. DC adaptor jack
11. Speakers
12. Wire Antenna
13. Back up the battery door
14. Time display
15. Alarm indicators
16. PM Indicator
17. FM Indicator
18. Bluetooth Indicator
19. Wireless charging indicator

Getting to know your alarm clock

Power connection

Clock setting

1. Plug in the DC 5V adaptor, the unit will display the default time of 0:00.
2. Press and hold (7) for 1-2 seconds, the display will show 24.
3. Press (2) or (4) to switch between 24hr and 12hr time.
4. Press (7) again to set the hour.
5. Press (2) or (4) to change the hour.
6. Press (7) to set the minute(s.
7. Press (2) or (4) to change the minute(s).
8. Press (7) to finish once the time has been set.

Alarm setting

1. In standby mode (or clock mode), press and hold the bell icon (6) for 3 seconds, the unit will then allow you to set the first alarm.
2. Press (2) or (4) to select the AL1 hour.
3. Press the bell icon (6) and / (2/4) to select the AL1 minute(s).
4. Press the bell icon (6) and / (2/4) again to select the AL1 source (beep or FM).
5. Press the bell icon (6) and / (2/4) to select the AL2 hour.
6. Press the bell icon (6) and / (2/4) to select the AL2 minute(s).
7. Press the bell icon (6) and / (2/4) again to select the AL2 source (beep or FM).
8. Press the bell icon (6) again once the alarm(s) has been set to exit.

Alarm enable/disable

1. In standby mode, press the bell icon (6) to enable the alarm.
2. The alarm will cycle through: AL1 / AL2 / AL1 and AL2 / off.

Stop & Snooze alarm

When the alarm sounds, press (5, Snooze) to delay the alarm for 9 minutes. Press (8) to turn off the alarm.

Dimmer

Press (5, Snooze) to select the brightness of the display.

Bluetooth connecting & disconnecting

1. Press (8) to cycle through the modes until you reach Bluetooth mode.
2. Once in Bluetooth mode, the display will flash while searching for the last connected device.
3. If the most recent connected device can not be found, the i-box Dawn will search for previous devices.
4. Select i-box Dawn from the Bluetooth list on your device to start pairing.
5. Once pairing is successful, the Bluetooth display will stop flashing and a beep will sound.
6. Press / (3) for 3 seconds to disconnect your device from the i-box Dawn. A beep will sound to confirm the device has been disconnected successfully. The i-box Dawn will now be in pairing mode again, allowing you to pair a new device.
7. Long press (8) to return to clock mode when you are finished.

Bluetooth play operation

• Press +/- (6/7) to increase or decrease the volume level (0-15).
• Press (2) to play the previous song or press (4) to select the next song.
• Press / (3) to play or pause the song.

FM radio operation

1. Press (8) to cycle through the modes until you reach FM radio mode.
2. Press (2) or (4) to change the FM station.
3. Press and hold (2) or (4) to search for the next FM station automatically.
4. Press +/- (6/7) to increase or decrease the volume.
5. Long press (8) to return to clock mode when you are finished.

FM radio memory

There are 10 preset spaces available for you to store your favorite stations.

1. Press (2) or (4) to select the FM station you would like to store.
2. Press and hold (3) to bring up the preset menu.
3. Press (2) or (4) to cycle through the 10 preset spaces available.
4. Press (3) once you have selected the preset space for your chosen FM. station to save the preset.
5. Press (3) to access the stored presets.
6. To access your saved preset, press (2) or (4) until you get to your chosen preset then wait 5 seconds for the FM station to start playing.

Sleep mode

Sleep Mode lets you fall asleep while listening to Bluetooth or FM music for the set sleep duration then turns the music off. In FM radio or Bluetooth mode, press and hold (5, Snooze) for 2 seconds. The i-box Dawn will display the sleep timer. Press (5, Snooze) to cycle through the sleep time options. The available options are: 120 mins / 90 mins / 60 mins / 30 mins / 15 mins / 10 mins / 5 mins / sleep timer off.

Charging your phone

You can charge your phone wirelessly or by using the available USB charging port on the back of the i-box Dawn. Please do not use both charging methods at the same time for one device (charging cable not included).

Wireless charging

1. Place your smartphone centrally on top of the i-box Dawn as shown.
2. The battery power of your device is shown via your devices display.

• When the phone is being charged wirelessly, the wireless charging indicator (19) will light up on the display.
• For maximum charging efficiency, the phone must be aligned with the center of the charging area (1).
• Phones that are capable of wireless charging may need to be placed slightly off-center. The built-in wireless receiver may not be centered inside the phone. This varies by brand/model.

If problems occur when charging or if charging does not start:

• Remove your smartphone from its case if the thickness of the case exceeds 5mm or if it contains metal.
• Check if your smartphone is placed on top of the i-box Dawn correctly as shown.
• The charging time varies depending on the charging capacity of the battery and its current residual capacity.
• The components may heat up during the charging process. They will slowly cool down again after the charging process.

USB charging port

1. Connect an external device via a USB cable to the USB charging port (9) on the back of the i-box Dawn to charge the device.
2. The battery power of your device is shown via your devices display.

• There may be some radio interference while charging.
• Please charge your device using only one charging method at any one time.
• Please do not charge the same device using the wireless charging function and USB charging port (9) at the same time.

Backup batteries

The i-box Dawn has a backup battery feature where 2x AAA batteries (not included) will allow it to remember time and alarm settings if unplugged or power is cut.

Specifications

• Power Input: 5V𝌂3.5A
• USB Output: 5V𝌂1A
• Speaker Output: 6 Watt RMS

Disclaimer

Updates to Firmware and/or hardware components are made regularly. Therefore some of the instructions, specifications, and pictures in this documentation may differ slightly from your particular situation. All items described in this guide are for illustration purposes only and may not apply to your particular situation. No legal right or entitlements may be obtained from the description made in this manual.

Technical support

For further help, advice, information, or live chat visit www.iboxstyle.com

For more manuals by i-box visit, ManualsLibrary

i-box Dawn Bedside Alarm Clock-FAQs