Pyle PSBT105A Portable Bluetooth PA Speaker
IMPORTANT SAFETY INSTRUCTIONS
- Read and keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarised or ground plug: A polarised plug has two blades with one wider than the other. The wide blade is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at the plug, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over. - Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
- Apparatus should not be exposed to dripping or splashing and no objects filled with liquids should be placed on the apparatus.
- Use only with the battery which is specified by the manufacturer.
- The power supply cord set is to be the main disconnected device.
- FOR OUTDOOR USE:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. - UNDER WET LOCATION:
Apparatus should not be exposed to dripping or splashing and no objects filled with liquids, such as vases should be placed on the apparatus. - SERVICE INSTRUCTIONS:
CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
TIPS TO PROLONG THE LIFE OF RECHARGEABLE BATTERIES
- Store portable system with batteries in a fully charged condition. 8-10 hours to fully charge.
- The battery prefers a partial rather than a full discharge. A partial discharge reduces stress and prolongs battery life.
- Avoid frequent full discharges because this puts additional strain on the battery.
- Avoid keeping the battery at full charge and high temperature.
- Fully charge the system at least once every 3~6 months. The battery may not charge if not charged for prolonged periods of time.
- Do not freeze the battery. Store in a dry, cool place away from heat. Elevated temperature reduces battery lifespan.
- Rechargeable batteries have a limited number of charge cycles and may eventually need to be replaced. Battery life and number of charge cycles vary by use and settings.
- Input Mode switch
- Record
- Cycling mode
- Previous song
- Pause and play
- Next song
- External battery input
- Power ON/OFF
- AUX input
- USB/MicroSD card input
- Mic volume control
- Mic echo control
- Music volume control
- Power input
- Mic input
- Bass control
- Treble control
- Preset EQ Mode
- Mute
- U-Disk/SD Card Switch
- Select a song by number
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | SOLUTION |
| No Sound or Faint Sound From the Speaker | Volume turned down | Adjust volume |
| The power switch is turned o | Turn the power switch on | |
| The power Indicator doesn’t turn ON | The power switch is turned o | Turn the power switch on |
| The rechargeable Battery is discharged | Plug into the AC outlet to recharge | |
| The rechargeable Battery is “dead” | Replace the battery and plug it into the AC outlet to recharge | |
| Distorted Sound From the Speaker | Volume set too high | Reduce volume |
| Excessive wind noise breath “pops” | Use windscreen on wireless & wired microphone | |
| The input signal is too strong | Adjust input signals | |
|
Excessive Feedback | The microphone too close or directly in front of the speaker | Move the microphone away from the speaker |
| Volume set too high | Recharge | |
| The microphone is too far from the sound source (requiring the volume to be turned up to compensate) | Speak closer to the microphone or move the microphone closer to the sound source | |
| Weak, Distorted Sound. Power Indicator Flickers | Batteries level is low | Plug into the AC outlet to recharge |
| Excessive Hum or Noise | Input Cable not shielded | Use shielded cable |
| Shortened Battery Life | Old or overused battery | Recharge or replace battery |
| The battery is not charged for over 3~4 months | Recharge or replace battery | |
| Battery CHARGING Indicator Not Flickering when plugged into AC Outlet | The rechargeable Battery is “dead” | Recharge or replace battery |
| The battery is not charged for over 3~4 months | Replace battery |
| Model | PSBT85A | PSBT105A | PSBT125A |
| BT Network Name | Pyle PSBT85A | Pyle PSBT105A | Pyle PSBT125A |
| Sound System | 8’’ -in. Subwoofer, 3’’ -in. Tweeter | 10’’ -in. Subwoofer, 3’’ -in. Tweeter | 12’’ -in. Subwoofer, 3’’ -in. Tweeter |
| Power Output | 800 Watt MAX | 1000 Watt MAX | 1200 Watt MAX |
| PA Speaker Dimensions (L x W x H) | 10.’’ x 8.1’’ x 15.4’’ inches | 12.4’’ x 10.2’’ x 19.5’’ inches | 15.0’’ x 12.0’’ x 23.0’’ inches |
Features:
- Compact & Portable PA Speaker System
- Powerful Loudspeaker Sound Projection
- Karaoke Style Microphone Priority Talkover
- Bluetooth Music Streaming Ability
- Built-in Rechargeable Battery
- Includes UHF Wireless Handheld Microphone
- Unique Audio Record Function
- Full Range Stereo Sound Reproduction
- Impressive Bass Response
- MP3 Digital Audio File Playback
- USB Flash Drive Memory Reader
- Micro SD Memory Card Reader
- 1/4’’ -inch Microphone Input
- Aux (3.5mm) Audio Jack
- Rear Panel Button Control Center
- Rotary Audio Configuration Adjustment
- LED Battery Indicator Lights
- Convenient Carry Handles for Portability
- Optional Powered Externally via 12V Power Input
- Used for Home & Backyard Karaoke, Public Events, Crowd Control
Bluetooth Wireless Streaming:
- Hassle-Free Bluetooth Pairing Setup
- Instantly Receives Wireless Music Streaming
- Works with all of Today’s Latest Devices
- Smartphones, Tablets, Laptops, Computers, etc.
- Bluetooth Version: 4.2
- Wireless Range: Up to 33’+ ft.
Recording Function:
- Simple Button Activated Sound Recording
- Records Audio as Streamed Through the Speaker
- Records via USB Flash or SD Memory Card Slots
- Easy Transfer to PC & Mac
- Filetype Saved: WAV
- *Only Records Audio via Microphone
What’s in the Box:
- Portable PA Speaker
- Wireless Microphone
- Remote Control
- Power Adaptor
Technical Specs:
- Wireless Frequency Mode: UHF
- Frequency Response: 55Hz-20kHz
- Sensitivity: 92dB (+/-2dB)
- Impedance: 4 Ohm
- S/N Ratio: >80dB
- T.H.D.: <1%
- Digital Audio File Playback Support: MP3, WMA, WAV
- USB / SD Memory Support: Up to 32GB
- Construction Material: Engineered ABS Molded Speaker Cabinet
- Battery Powered Remote Control, Requires (1) x ‘CR-2025’, Included
- PA Speaker Rechargeable Battery: 3.7V Li-iOn,2200mAh (x2)
- Optional External Power Supply: 12V
- Power Supply: 120/240V (9V Power Adapter)
For more manuals by Pyle, visit ManualsLibraryy
Pyle PSBT105A Portable Bluetooth PA Speaker-FAQs
How do I know when my Pyle speaker is fully charged?
The indicator light will turn green when the speaker is fully charged.
How do I turn on Bluetooth on my Pyle speaker?
Switch the power on, press the MODE key to enter Bluetooth mode, and connect to your mobile device when “PyleUSA” appears.
How do I set up a portable speaker?
Turn on Bluetooth, select the speaker from your device’s list, and enter the PIN or passkey if prompted.
How do I check my speaker’s battery level?
Check the indicator lights, which often display different colors or patterns to indicate charge levels.
How do I adjust the volume on my Pyle speaker?
Press the SEL button, display shows VOL, then press the volume + or – buttons to adjust the level.
What is the PIN number for Pyle speakers?
The PIN number is 0000. Make sure your device is set to “Discoverable” for pairing.
How do I put my Pyle speaker in pairing mode?
Press the BT/Line button, and the speaker will automatically enter pairing mode.
Do Bluetooth speakers require Wi-Fi?
No, Bluetooth speakers work directly between paired devices without needing Wi-Fi.
How does Bluetooth work?
Bluetooth devices detect each other when in close proximity, using radio frequencies to establish a connection.