Innovative Technology ITUT-201SVR USB Turntable User Manual

Innovative Technology ITUT-201SVR USB Turntable

USB TURNTABLE

IMPORTANT SAFETY INSTRUCTIONS FOR AUDIO PRODUCTS-READ THOROUGHLY

When using electrical products, basic precautions should always be followed including:

1. Read Instructions the safety and operating instructions should be read before the product is operated.
2. Retain Instructions- The safety and operating instructions should be retained for future reference.
3. Heed Instructions-All warnings on the product and in the operating instructions should be adhered to.
4. Follow Instructions operating and user instructions should be followed.
5. Cleaning-Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6. Attachments do not use attachments not recommended by the product manufacturer as they may cause hazards.
7. Water and Moisture-Do do not use this product near water for example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.
8. Accessories does not place this product on an unstable surface. The product may fall, causing serious injury to a child or adult and serious damage to the product. Use only with a stand, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer.
9. Transporting-This product should be moved with care to avoid damage or injury.
10. Ventilation-Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
11. Power Sources-This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operation instructions.
12. Main Plug – The main plug is used as the disconnect device, the disconnect device shall remain readily operable. Downloaded from www.Manualslib.com manuals search engine
13. Power-Cord Protection- Power-supply cords should be routed so that they are not likely to be trapped in any way.
14. Lightning-For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
15. Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
16. Overloading-Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry-Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. The apparatus shall not be exposed to dripping or splashing, and no object filled with liquids, such as vases, shall be placed on the apparatus.
18. Servicing-Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19. Damage Requiring Service-Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
    • If the power-supply cord or plug is damaged.
    • If liquid has spilled, or objects have fallen into the product.
    • If the product has been exposed to rain or water.
    • If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
    • If the product has been dropped or damaged in any way, and the product exhibits a distinct change in performance-this indicates a need for service.
20. Replacement Parts-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
21. Safety Check-Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating
    condition.
22. Wall or Ceiling Mounting-The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
23. Heat-The product should be situated away from heat sources such as radiators, heat registers, stoves or other products (including amplifiers) that produce heat.

Precautions Safety Information

CAUTION

1. In order to shut off the power of this product completely, unplug the power cord from the wall outlet. Be sure to unplug the unit if you do not intend to use it for an extended period of time, such as a vacation.
2. Use of controls, adjustments and performance of procedures other than those specified herein may result in hazardous radiation exposure.
3. If this product develops trouble, contact a qualified service center, and do not use the product in defective state.

Before Use

1. Choose unit installation location carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, cold or moisture. Keep away from sources that hum, such as transformers or motors.
2. Do not open the cabinet as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the set, contact your dealer.
3. Be sure not to handle stylus (needle) with dirty fingers.
4. When removing the power plug from the wall outlet, always pull directly on the plug, never pull the cord.
5. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry cloth.
6. In order to shut off the power to this product completely, unplug the power cord from the wall outlet. Be sure to unplug the unit if you do not intend to use it for an extended period of time, such as a vacation.
7. Keep this manual in a safe place for future reference.

Location of parts

1. POWER SWITCH
2. TRANSIT SCREW
3. TONE ARM
4. SECURITY HOOK
5. TONE ARM REST
6. SPEED CONTROL SWITCH
7. STOP BUTTON
8. EJECT BUTTON
9. PLAY BUTTON
10. TURNTABLE
11. USB SLOT
12. LINE OUT CABLE
13. AC POWER CORD

Preparation for Use

1. Connect the AC power cord to household outlet.
2. Before your playback, repeatedly move the tone arm slowly and gently from the silver spindle to tone arm rest for several times.

How to Replace the Turntable Stylus (Needle)

Removing old stylus

1. Set a screwdriver at the tip of the stylus and push down in the direction “A”.
2. Remove the stylus by pulling it forward and down.

Installing a new stylus

1. Hold the tip of the stylus and insert the other edge by pressing in the direction “B”.
2. Push up in the direction “C” until it locks at the tip.

Listening to a Record

1. Connect the AC power cord to household outlet.
2. Plug the 2 ends of the LINE OUT Cable into the auxiliary input (Aux) on your TV, home entertainment receiver or other music system. Be sure that the red RCA Cable is inserted into the red jack and the white RCA Cable is inserted into the white jack.
3. Press the POWER button in the front of the unit. Also turn the power on the device connected to this turntable.
4. Put a record onto the turntable. When playing a 45rpm record, remember to use the adapter packed in the polybag along with the manual.
5. Select player speed (33-1/3, 45 OR 78 rpm) according to your playing record.
6. Remove the tone arm-rest holder, lift the cue-lever and move the tone arm gently to the desired position over the record. Lower the cue-lever slowly and record will start to play.
7. Adjust the volume level on your connected device.
8. Press STOP button to stop playing.
9. Press the PLAY button to continue playing.
10. When the record is reaching to the end, tone arm will return to the tone arm-rest automatically. Or you can press the eject button when playing the record and the tone arm will lift up from the record and automatically return to the arm-rest.
11. Remember to disconnect the power cord when the unit is not intended to use for extended periods of time.

Audacity Software

The provided CD disc contains the following software

1. audacity-src-1.2.6——— For Windows
2. Audacity_for_MAC———For Macintosh
3. Audacity_for_WIN———For Windows
4. AUTORUN.INF
5. The GNU General Public License.html
   The software is compatible with Window 98, 2000, ME, XP, VISTA, 7 and Macintosh.

Audacity Installation and USB Connection

Connect the USB cable to the turntable and into your computer. Connect the turntable’s power cord. Then press Power button to turn on the turntable.

1. Please insert the Audacity software disk that comes with your unit. Click the Audacity disk on the desktop.
2. There are five folders in the Audacity disk. Select Audacity_for_MAC for Macintosh system, and select Audacity_for_WIN for Windows system.

Installing the Audacity Software

1. The Audacity Setup Wizard will appear. Click on Next to install the software.
2. Click on “I accept the agreement” and click on Next.
3. Continue to click on the Next buttons.
4. Click on the Install button to start installation.
5. Click on Finish to complete installation.
6. You can now open the Audacity software and start recording your files.
   NOTE: Once you set up Audacity, you do not need to re-set it with each use.
   (For additional information, visit the Audacity website at http://audacity.sourceforge.net)

Configuring Audacity for Microsoft Windows

Audacity Interface

Audacity Interface—Settings and controls.

Audacity Control Buttons

Using the attribute controls button at the top of the screen to go to beginning, Play, Record, Pause, Stop and End. Use the File, Edit, View, Project, Generate, Effect and Analyze menus to Save, Export, and edit the music.

For more manuals by Innovative Technology, visit ManualsLibraryy

Innovative Technology ITUT-201SVR USB Turntable-FAQs