Aisidra AD BA010 Bluetooth Wireless Adapter
What’s included
Specification
| Bluetooth Profile | A2DPIAVRCP |
| Bluetooth Specification | Bluetooth 5.2 |
| Audio Codec | TX: aptx'” , SBC RX: aptx'” , SBC, AAC |
| Range | 33ft/ 10m |
| Battery Capacity | 160mAh |
| Charging Power | 5VDC |
| Working hours | 10 -12 hours |
| Charging time | 2 hours |
| Operating temperature | -10to55’C |
| Dimension (L x W x H) | 1.88 X 1.39 X 0.43in / 4.80 x 3.55 x 1.10cm |
| Weight | 0.53oz I 15g |
Product Diagram
- LED Indicator
- Power Button
- Transmitter Mode (TX)
- Mode Switch
- Receiver Mode (RX)
- 3.5mm Audio Port
- Micro USB Charging Port
How To Use
| Function | Button | Operation | LED Indicator | Status |
| Power On |
|
Press and hold the power button for 3 seconds. | Flashing red and blue | Pairing |
| Blue light on | Paired | |||
| Power Off | Light Off | Power Off | ||
| Pairing | Double-click the power button the power on. | Flashing red and blue | Pairing | |
| Pair the 2nd device | Double-click the power button while connected to the 1st device already. | Flashing red and blue | Pairing | |
| Play/ Pause | Click the power button in RX Mode. | Blue light on | Play/ Pause | |
| Clear paired history | Press and hold the power button for 7 seconds when the power is on. | Red and blue lights are both on and flash twice | Power On | |
| Reset | Press and hold the power button and charge at the same time when powering on. |
Light off |
Power Off | |
| Mode Switch |
|
Slide the button from one side to the other side. | Flashing red and blue | Pairing |
How To Use by Transmitter (TX) Mode
Connect to the 1st Headphones:
Connect your device and BA010 with a 3.5mm connector via an audio output interface. (*TV: 3.5mm connector+ RCA connector)
Slide the button to TX Mode.
Press and hold the power button for 3 seconds. The light flashes red and blue when pairing, the light turns to solid blue when paired.- Connect to the 2nd Headphones:
After connecting the 1st device, double-click to enter pairing mode (the light flashes red and blue alternately), and the light turns solid blue when connected.
BA010 will automatically reconnect to the last device within 10 seconds. If it fails, please clear both the Bluetooth history of your Bluetooth devices and BA010, then repeat the pairing steps.
Connect your device and BA010 with a 3.5mm connector via an audio output interface. (*TV: 3.5mm connector+ RCA connector)
Slide the button to TX Mode.
Press and hold the power button for 3 seconds. The light flashes red and blue when pairing, the light turns to solid blue when paired.
After connecting the 1st device, double-click to enter pairing mode (the light flashes red and blue alternately), and the light turns solid blue when connected.
BA010 will automatically reconnect to the last device within 10 seconds. If it fails, please clear both the Bluetooth history of your How To Use by Receiver (RX) Mode
Connect to Smartphone/Tablet:
Connect your device and BA010 with a 3.5mm connector. (*Wired Speaker: 3.5mm connector+ RCA connector)
Slide the button to RX Mode.
Press and hold the power button for 3 seconds; the light flashes red and blue when pairing.
Find “AD-BA010” on your device’s Bluetooth search results, and tap it. (The light turns to solid blue when paired)
Find “AD-BA010” on your device’s Bluetooth search results, and tap it. (The light turns to solid blue when paired)LED Indicator
| LED Indicator | Status |
| The red light on | Charging |
| Blue light on | Paired |
| Red and blue lights both on and flash twice | Clear paired history |
| Flashing red and blue | Pairing |
| Flashing red | Battery low |
| Flashing blue | Pairing failed |
| Light off | Power off/Fully charged/Reset |
Notes
- Please charge the adapter for at least 2 hours before using it for the first time.
- Please place your devices and the adapter within 1 meter.
- Please turn off other Bluetooth devices that you do not want to connect to while pairing.
- Available: Use the adapter while charging.
- Available to connect 2 Bluetooth devices by 1 adapter.
- Available to remember two recently paired devices and will attempt to nair with them automatically when nower on.
Trouble Shooting
Fails to Pair:
Clearly paired history:
- Step 1: Turn off the adapter.
- Step 2: Press and hold the power button for 7 seconds until the red and blue lights both turn on and flash twice.
- Step 3: Turn on the adapter again to pair.
- Please clear the Bluetooth history of BA010 and your Bluetooth devices before pairing.
Reset:
- Step 1: Turn on the adapter.
- Step 2: Press and hold the power button and charge at the same time.
- Step 3: Turn on the adapter again to pair.
Paired but No Sound:
- Please make sure you plug the connector into the audio OUTPUT interface.
- Check your TV setting, and change the audio output setting to “VARIABLE”. Set the TV’s internal speakers to “OFF”.
- Exact menu and item names may vary between TVs
For more manuals by Aisidra, visit ManualsLibraryy