NuPhy Air60 V2 Portable Wireless Mechanical Keyboard
Get Started
System Selection
- Win mode
- Mac mode
Connection Mode Selection
- Power off
- Wired mode
- Wireless mode
Wireless Device Connection
Long-press for 3 seconds to enter pairing mode. Short-press to switch between devices. Plug the 2.4GHz receiver into your computer before pressing FN+4.
Air60 BT5.0 = Bluetooth 5.0, Air60 BT3.0 = Blustooth 3.0
Backlight Settings
- FN + <= Backlight effect switching
- FN + >= Backlight color switching
- FN + up, down= Brightness + –
- FN +, . = Backlight speed + –
Sidelight Settings
- FN + ? + <= Sidelight effect switching
- FN + ? + >= Sidelight color switching
- FN +? + up, down= Sidelights brightness + –
- FN + ? +, . = Sidelight speed + –
Sleep Mode Setting
If there is no operation on the keyboard, it will turn off the light and enter sleep mode after 6 minutes.
Function Keys Switching
Mac: FN + 1/2/3…+ = multimedia function keys
Win: FN + 1/2/3…+ = FI/F2/F3…F12
FN + TAB + F = F1~F12 function switching
Mac: FN + 1/2/3…+ = F1/F2/F3…F12
Win: FN + 1/2/3…+ = multimedia function keys
Battery Indicator
FN + | = Flashes the current battery level color
FN + ] = Battery indicator always on enabled
FN + | = Battery indicator always on disabled
Factory Reset
FN + TAB + V = Factory reset
Customer Service
For more Manuals by NuPhy, visit ManualsLibraryy
NuPhy Air60 V2 Portable Wireless Mechanical Keyboard-FAQs
How do I connect the NuPhy Air60 in wired mode?
Plug the keyboard into your device using the USB cable. Ensure the mode switch is set to Wired, then visit usevia.app using a Chromium-based browser for configuration.
How can I reset my NuPhy keyboard to factory settings?
Switch the keyboard to wired mode, then press FN + [ to reset it to default settings.
How do I know if the keyboard is charging?
While charging, the sidebar will slowly flash orange to indicate power is being restored.
How do I enable or unlock my keyboard if it’s not working?
Hold the FN key and press Scroll Lock, Num Lock, or other function keys to reactivate the keyboard if it’s unresponsive.
Is the NuPhy keyboard programmable?
Yes, the NuPhy Air60 V2 supports macro programming for all keys and can pair with up to three devices simultaneously.
How many switches does a 60% keyboard need?
You’ll need at least 61 switches for a 60% keyboard layout like the Air60.
How do I clean my NuPhy keyboard?
Use a keycap puller to remove keycaps, then clean the board using cotton swabs dipped in a mild soap solution for tight areas or stubborn dirt.
How do I activate the wired keyboard connection?
Simply plug the keyboard into a USB port. Your computer will automatically install the required drivers.