OontZ Angle 3 Ultra Bluetooth Speaker User Guide

OontZ Angle 3 Ultra Bluetooth Speaker

In the Package

Note: The USB Type-C Charging Cable is packed below the cardboard insert at the end of the triangle box. Slide out the insert to locate the cable.

Buttons

Bluetooth/Speakerphone Button

Button (Dual Function)

Volume Down
- Press and Release to decrease volume one level; repeat until volume lowers to the desired level
- Holding the button down will result in a traceback
Track Back
- Press and Hold Down for 2 Seconds

Play/Pause Button

- Press and Release to Pause/Play

Button (Dual Function)

- Press and Release to increase volume one level; repeat until volume rises to the desired level
- Holding the button down will result in the track moving forward

Track Forward

- Press and Hold Down for 2 Seconds

Lights

Flashing Blue
The speaker is in pairing mode
Solid Blue
The speaker is connected
Blue Light will turn to Solid Blue
When a 3.5mm audio cable is plugged into the AUX IN Jack
With a second OontZ Angle 3 speaker (sold separately), you can wirelessly connect both speakers together to play with the OontZ Dual Speaker.
For OontZ Dual Speaker instructions, please see page 18
Slowly flashing Red battery is the
Solid Red battery is fully charged

Connectors

Covers connectors
Pull gently from the bottom to access connectors, it is a snug fit to provide water resistance

Note: The rubber flap needs to be closed to keep the speaker water-resistant

Play Horizontally or Vertically

Play Horizontally Controls on the side.
Play Vertically Controls on top
Has its own grille
Face bass away from Dual Precision Stereo Drivers
Rich bass does not interfere with Mids and Highs

Battery Features

The rechargeable battery comes with a partial charge, and the speaker is ready to play.
For maximum playtime, fully charge the battery.
You can play while charging.

Low Charge Remaining

When the battery charge is less than 15%, the remaining Red Light will begin flashing rapidly.
The volume will decrease to preserve the remaining battery charge.
Music Play Time
Up to 14 hours on a full charge, at 2/3 volume. Louder volumes will reduce the battery’s

Power Saving Feature

When playing from battery power, the OontZ Angle 3 will turn off after 15 minutes of not playing audio to conserve battery charge. *
When plugged into a charging source, the OontZ Angle 3 will remain on until you turn the power off.
You can continue to keep the speaker plugged into a charging source even when it is fully charged, play playtime.

Charging the Battery

Slowly flashing Red
The battery is charging
Solid Red
The battery is fully charged
Insert the small end of the USB Type-C Charging Cable into the USB Type-C Charging Connector as shown.
Insert the larger end of the USB Type C Charging cable into a USB wall charger for a Smartphone or iPhone, or a USB port on your laptop/computer to charge the battery (see illustrations on page 8).

Charging Time:

Up to 5 hours to fully charge a low battery.

Charging the Battery (continued)

Insert the larger end of the USB Type C Charging Cable into a USB wall charger for a Smartphone or iPhone (USB wall charger* that is 5V 3.0A maximum), or a USB port on your laptop/computer to charge the OontZ Angle 3 battery.
Only use a USB wall charger that is UL-listed. A USB wall charger will have the logo printed on it.

Turning On and Off

Turn ON
Press and release the Power Button
Flashing Blue
The speaker is turned on and is in pairing mode
Solid Blue
The speaker is turned on and has connected to an audio source device, and is ready to play
Turn OFF
Press and Hold Down the Power Button for 2 Seconds
Blue Light will turn off

Pair & Connect with Your Device — Step 2

With Your iPhone, iPad, iPod, Smartphone, Tablet & Mobile Devices

Go to Settings > Bluetooth, check that Bluetooth is on
- Select ‘OontZ Angle 3 DS xxx’ when it appears under DEVICES (xxx: 3 characters which are unique to your speaker)
- Your device will connect in a few seconds
- The Blue Light will turn solid blue, and there will be a quiet chime
- You can now play your audio wirelessly to your OontZ Angle 3
- Note: Your Smartphone or Tablet instructions may vary

Pair & Connect — Step 2

From your Amazon Echo device

To pair and connect the first time with an Amazon Echo device use the Alexa app on your device

Open the Alexa app
Press ‘Devices’ by pressing the ‘Devices’ button in the bottom right corner
Press ‘Echo & Alexa’
Select your Amazon Echo device from the ist of devices displayed by pressing it
Press ‘Bluetooth Devices’
Press ‘Pair A New Device’
Select the ‘OontZ Angle 3 DS xxx’ (xxx: 3 characters unique to your speaker) when it appears
The OontZ Angle 3 will make a ‘ding’ sound when connected

To connect the next time, turn on the OontZ Angle 3 and say “Alexa, connect my speaker” or “Alexa, pair.”

From your Amazon Echo device (continued)

Important Note: When the OontZ Angle 3 is playing from battery power and connected to the Amazon Echo device, the speaker will remain on, and it will not automatically turn off after 15 minutes of not playing audio. This will use up the battery charge.

We recommend:

1) Keep the OontZ Angle 3 plugged into a USB wall charger.
- It can remain on and be available to play from the Amazon Echo device.
2) Turn off the OontZ Angle 3 when you are done listening.
- Either turn off the speaker by pressing and holding down the power button for 2 seconds,
- or say “Alexa, disconnect my speaker” and the OontZ Angle 3 will automatically turn off after 15 minutes.
- When you want to connect and play to the speaker again, turn on the OontZ Angle 3 and say “Alexa, connect my speaker” or “Alexa, pair”.

To Play with Non-Bluetooth Audio Source Devices

Use a 3.5mm Audio Cable

Make sure your OontZ Angle 3 battery has a sufficient charge

Turn ON your OontZ Angle 3

Plug one end of a 3.5mm audio cable into the AUX IN Jack on the back of your speaker.
Plug the other end of the 3.5mm audio cable into the headphone jack on your laptop/computer or non-Bluetooth audio device.
Make sure both ends of the cable are fully inserted
You are now ready to play.

Wireless Hands Free Personal Speakerphone

The Wireless Hands Free Personal Speakerphone feature works over Bluetooth with Smartphones and iPhones only
This feature is not supported when connected to PCs, laptops, or Apple Macs, or other types of devices.

To answer an Incoming Call / To End a Call

Press and Release the Bluetooth Button
To Reject an Incoming Call
Press and Hold Down the Bluetooth Button for 3 Seconds.
Please keep the speaker close in front of you so you may be heard clearly by the listener.
You can use your Smartphone or iPhone to switch between using Hands Free Speakerphone and your phone.

Two OontZ Angle 3 Speakers connected for Left Channel – Right Channel

Play Control Speaker

Second Speaker

Use the buttons on the Play Control Speaker for play/pause, track back, track forward, answer, and end phone calls. These controls are disabled on the second speaker when paired together.
Use the Play Control Speaker for connecting to different audio devices via Bluetooth or AUX IN. The Bluetooth and AUX IN are disabled on the second speaker when paired together.
Speakerphone call audio will only play through the Play Control Speaker

Changing to Dual Mode from Left Channel – Right Channel

Use Dual Mode when placing the two speakers in different areas, and play the same music to both speakers.

To set both speakers for Dual Mode, they must first be connected together for Left Channel – Right Channel (see page 18).
With the speakers connected together for Left Channel – Right Channel, you can change the speakers to Dual Mode.
To change to Dual Mode, quickly press the Bluetooth button twice on the Play Control Speaker. The second speaker light will turn from solid White to solid Orange.
Both speakers will say “Dual Mode,” and you are ready to play.

OontZ Dual Speaker – Important Notes

Turning the speakers off

Turning the Play Control Speaker off will turn both speakers off.
Turning the second speaker off first will only turn that speaker off, and the Play Control Speaker will play as a single speaker.

Turning the speakers back on

Turn both speakers on, and they will automatically try to connect to each other again.
Turn one of the speakers on, and a device can connect with it, and play as a single speaker.

Disconnecting the two speakers from each other

Both speakers need to be turned on.
On the Play Control Speaker, press and hold down the Play/Pause button for 3 seconds. The White Light on the second speaker will turn off, and the speakers will be disconnected from each other

Resetting Your OontZ Angle 3

Step 1: Remove the USB Type-C Charging Cable and a 3.5mm Audio Cable, if connected.
Step 3: The speaker has now been reset, and you can turn it on. The speaker has now been reset, and you can turn it on.

Safety and Precautions

When the OontZ Angle 3 speaker is plugged into a charging source with the USB Type-C Charging Cable, never use the speaker in the shower, bath, or near water, to prevent the risk of electric shock.
Read and follow all instructions – All operating and use instructions should be followed.
Protect the USB Type-C Charging Cable from being pinched, particularly at the connectors.
Unplug the USB Type-C Charging Cable during lightning storms or when unused for long periods of time.
Do not place the speaker near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Refer all servicing to qualified personnel. Servicing is required when the speaker has been damaged in any way.
Do not make alterations to this speaker.
The battery in the speaker is not replaceable. Do not attempt to change it. Use this speaker only with an agency-approved power supply that meets local regulatory requirements (e.g., UL, CSA, VDE, CCC) in accordance with the manufacturer’s specifications.
Do not place near naked flame sources, such as lighted candles, on or near the speaker.
Do not expose this speaker to excessive heat (e.g., from storage in direct sunlight, fire ,or the like)
If the battery leaks, do not allow the liquid to come in contact with the skin or eyes. If contact is made, seek medical advice.

For more manuals by Oontz, visit ManualsLibraryy

OontZ Angle 3 Ultra Bluetooth Speaker User Guide