Kobalt KRC 244503 Battery Charger
PRODUCT SPECIFICATIONS
NOTICE: Use with the following batteries only.
PACKAGE CONTENTS
WARNING:
- Remove the tool from the package and examine it carefully. Do not discard the carton or any packaging material until all parts have been examined.
- If any part of the tool is missing or damaged, do not attach the battery pack or use the tool until the part has been repaired or replaced. Failure to heed this warning could result in serious injury.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble or operate this product. If you have any questions regarding the product, please call customer service at 1-888-3KOBALT, 8 a.m. – 8 p.m. EST, Monday-Friday.
Know the Tool
To operate this tool, carefully read this manual and all labels affixed to the charger before using it. Keep this manual available for future reference.
Important
This charger should be serviced only by a qualified service technician.
Read All Instructions Thoroughly
IMPORTANT SAFETY INSTRUCTIONS- SAVE THESE INSTRUCTIONS
DANGER – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS
Specific Safety Warnings for Charger
WARNING:
- Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.
- Before using the battery charger, read all instructions and cautionary markings in this manual and on the battery charger. Also read all the instructions in the manuals for and the cautionary markings on the battery and the product using the battery to prevent misuse of the products and possible injury or damage.
CAUTION
- To reduce the risk of electric shock or damage to the charger and battery, charge only those rechargeable batteries specifically designated on your charger’s label. Other types of batteries may burst, causing personal injury or damage.
- Do not use the charger outdoors or expose it to wet or damp conditions. Water entering the charger will increase the risk of an electric shock.
- Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock or injury to persons.
- Do not abuse the cord or charger. Never use the cord to carry the charger. Do not pull the charger cord to disconnect the plug from a receptacle. Damage to the cord or charger could occur and create an electric shock hazard. Replace damaged cords immediately.
- Make sure that the cord is located so that it will not be stepped on, tripped over, come in contact with sharp edges or moving parts, or otherwise be subjected to damage or stress. This will reduce the risk of accidental falls, which could cause injury and damage to the cord, which could then result in an electric shock.
- Keep the cord and charger away from heat to prevent damage to the housing or internal parts.
- Do not allow gasoline, oils, petroleum-based products, etc., to come in contact with plastic parts. These materials contain chemicals that can damage, weaken, or destroy plastic.
- An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in a risk of fire and electric shock. If an extension cord must be used, make sure that:
- The pins on the plug of the extension cord are the same number, size, and shape as those of the plug on the charger.
- The cord is properly wired and in good electrical condition.
- The size is large enough for the A/C ampere rating of the charger as specified below:
NOTE: AWG = American Wire Gauge
- Do not operate the charger with a damaged cord or plug, which could cause a short and an electric shock. If damaged, have the charger repaired or replaced by a qualified service technician.
- Do not operate the charger if it has received a sharp blow, been dropped, or has otherwise been damaged in any way. Take it to a qualified service technician for an electrical check to determine if the charger is in good working order.
- Do not disassemble the charger. Take it to a qualified service technician when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
- Unplug the charger from the electrical outlet before attempting any maintenance or cleaning to reduce the risk of electric shock.
- Disconnect the charger from the power supply when not in use. This will reduce the risk of electric shock or damage to the charger if metal items should fall into the opening. It will also help prevent damage to the charger during a power surge.
- Risk of electric shock. Do not touch the uninsulated portion of the output connector or the uninsulated battery terminal.
- Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan this tool to someone else, also loan these instructions to them to prevent misuse of the product and possible injury.
DANGER
- People with electronic devices, such as pacemakers, should consult their physician(s) before using this product. Operation of electrical equipment near a heart pacemaker could cause interference or failure of the pacemaker.
FCC Statement
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Know Your Battery Charger
Before attempting to use the battery charger, familiarize yourself with all of its operating features and safety requirements.
WARNING
- Do not allow familiarity with the battery charger to cause carelessness. Remember that one careless moment is enough to cause severe injury. Before attempting to use any tool, be sure to become familiar with all of the operating features and safety instructions.
- Do not attempt to modify this charger or create accessories not recommended for use with this charger. Any such alteration or modification is a misuse and could result in a hazardous condition, leading to possible serious personal injury.
OPERATING INSTRUCTIONS
- To Charge a Battery Pack
NOTICE: Battery packs are shipped in a low-charge condition to prevent possible problems. Before using it for the first time, fully charge the battery pack. Refer to the operating manual for your battery pack to determine charging times.- Charge the battery pack with the correct charger.
- Connect the charger to a power supply. The red and green LED charge indicators (B and C) will illuminate for approximately 1 second and then turn off.
- Attach the battery pack to the charger by aligning the raised ribs of the battery pack with the slot in the charger. Slide the battery pack onto the charger (Fig. 1).
- The charger will communicate with the battery pack’s circuitry to evaluate the condition of the battery pack. Please refer to the Charger Display section.
- The green LED will flash continuously during normal charging.
- After charging is complete, the green LED on the charger will be on the power indicator LEDs on the battery pack turn off. The power indicator LEDs will illuminate when the power indicator button is pressed while the battery pack is off the charger.
NOTICE: - The battery pack will fully charge, but will not overcharge, if left on the charger.
- The charger may warm with several continuous charge cycles. This is part of the normal operation of the charger. Always charge the battery pack in a well-ventilated area.
Lithium-Ion Batteries
It is not necessary to run down the Lithium-Ion battery pack charge before recharging. Remove the battery pack from the tool and recharge it when it is convenient.
- Charger Display
- Wall-mount holes
The charger has hanging Holes for convenient storage. Install screws in the wall 2.25 inches apart. Use screws sufficiently strong to hold the combined weight of the charger and battery pack.
CARE AND MAINTENANCE
All maintenance should only be carried out by a qualified service organization.
Cleaning
Before cleaning or performing any maintenance, disconnect the battery charger from the power source. For safe and proper operation, always keep the charger and its ventilation slots clean. Always use only a soft, dry cloth to clean your charger; never use detergent or alcohol.
3-YEAR HASSLE-FREE WARRANTY
For 3 years from date of purchase the charger is warranted for the original purchaser to be free from defects in material and workmanship. This guarantee does not cover damage due to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or expendable parts and accessories expected to become unusable after a reasonable period of use. If you think your product meets the above guarantee criteria, please return it to the place of purchase with valid proof of purchase and the defective product will be repaired or replaced at no charge. This guarantee gives you specific legal rights, and you may also have other rights that vary from state to state.
For more manuals by Kobalt, visit ManualsLibraryy
Kobalt KRC 244503 Battery Charger-FAQs