BALMUDA K06H The Brew Automatic Coffee Maker User Guide

BALMUDA K06H The Brew Automatic Coffee Maker

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

1. Read all instructions.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against fire, electric shock, and injury to persons, do not immerse the cord, plugs, or main body in water or other liquid.
4. Close supervision is necessary when any appliance is used by or near children.
5. Unplug the power cord from the outlet when the appliance is not in use and before cleaning it. Allow the appliance to cool before installing or removing parts, and before cleaning it.
6. Do not operate the appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair, or adjustment.
7. The use of any accessory not evaluated for use with this appliance may cause injuries.
8. Do not use the appliance outdoors.
9. Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
10. Do not place the appliance on or near a hot gas or electric burner, or in a heated oven.
11. Always attach the plug to the appliance first, then plug the cord into the wall outlet. To disconnect, turn any control to “off,” then remove the plug from the wall outlet.
12. Close the lid completely, or it may result in scalds. Hold the hand when removing the lid.
13. Do not remove the lid during the brewing cycles. Doing so may result in scalds.
14. Do not use the appliance for anything other than its intended use.
15. The appliance is for household use only.

SAVE THESE INSTRUCTIONS

SHORT CORD INSTRUCTIONS

• A short power-supply cord is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.
• Extension cords may be used if care is exercised in their use.
• If an extension cord is used:
  1. The marked electrical rating of the extension cord should be at least as high as the electrical rating of the appliance.
  2. This appliance is equipped with a grounded plug. The extension cord should be a grounding type 3-wire cord.
  3. The extension cord should be arranged so that it does not drape over the countertop or tabletop where it can be pulled on by children or tripped over.

About the plug

• This appliance has a grounded type plug for safety purposes. This plug is only compatible with 3-pin outlets.
• In order to avoid disabling this safety function, connect it to correctly grounded outlets only.
• Do not remove the grounding prong.
• Failing to connect the grounding conductor correctly may cause an electric shock. If it is unclear whether the outlet is correctly grounded, consult a qualified electrician.

Safety Precautions

Read the Safety Precautions carefully before use to ensure correct operation. The precautions described in this manual must be followed to ensure safe use of this appliance and prevent hazards to you and other people, as well as damage to the appliance and your home or property. This appliance is intended for household use only.

Contents of the Package

Notes

1. These items are installed on the main body at the time of purchase.
2. The lids of the water tank and the carafe are attached at the time of purchase. Hot water flushing and brewing must be performed with the lids attached.

Names of Parts

Three Types of Modes

Clear Brewing Method

A new brewing system that uses a unique method to deliver hot water with fine temperature control

Precise control of the temperature, timing, and amount of hot water delivered for each size and mode setting vibrantly brings out the intrinsic features of coffee beans while minimizing bitterness and other unpleasant tastes. The REGULAR mode also balances rich flavor with a clear aftertaste by delivering hot water through a bypass during brewing.

Three modes for extracting the individual characteristics of beans

Adjust the amount of ground coffee as desired according to the grind sizes and the roast levels. Refer to the following as a guide.

In addition, use ground coffee prepared for paper filters.

When residue is noticeable on the dripper stand or the measuring scoop, wash them with water and dry them thoroughly before use.

The amount of brewed coffee will depend on the modes and the sizes. In addition, the amount of brewed coffee may be increased or decreased depending on the water content of the ground coffee and other factors.

Using the Appliance for the First Time

Preparations

Take hold of the base or the central section of the main body to move the appliance. Leave a wide space around the appliance. Position the appliance on a stable and horizontal surface. Leave at least 4 inches at the back of the appliance to facilitate the placement of the water tank.

Leave a wide space so that walls, furniture, the ceiling, etc., will not be exposed to steam, water, or coffee discharged from the main body. Do not place items you want to keep clean around the appliance.

The appliance generates steam while it is brewing coffee. The steam may reach more than 12 inches around and 28 inches above the nozzle. If an item around the appliance is exposed to the steam or coffee, it may be discolored, deformed, or otherwise damaged.

Flushing with hot water

When using the appliance for the first time or when the appliance has not been used for a long period, flush the appliance with hot water to clean the inside.

 Do not use a paper filter or ground coffee when flushing the appliance with hot water.

1. Wash the dripper and the carafe with water.
   Follow the procedure in 1 – 1 on p. 10 to remove the dripper. Wash the dripper and the carafe with water.
2. Flush the appliance with hot water.
   Run the appliance with water only while referring to 1 – 3 on p. 10 to 3 on p. 11.
   Fill the water up to HOT on the guideline for the size. Select the REGULAR mode and L (Large).
3. Discard the water.
   Discard the hot water in the carafe and the water remaining in the water tank.
    Since hot water and steam are discharged during the hot water flushing, be careful to keep your face and hands away from the appliance.
   Failure to do so may cause burns.

How to Brew Coffee

Set ground coffee

Turn the dripper 90 degrees so that the dripper handle faces the front and remove the dripper from the main body.

Place the dripper on the dripper stand.

Fold a paper filter along the seam and set the paper filter. Add enough ground coffee for the size using the measuring scoop.

Use the cone-shaped paper filters for 1 to 4 cups supplied as accessories. Additional filters are commercially available.

Insert the dripper into the main body straight from the front while holding its handle as shown in the figure.

Turn the dripper 90 degrees to the left or right so that the marks on the dripper and the main body are aligned.

Fill the water tank with water.

Hold the empty carafe with its lid attached and place the carafe on the main body so it is straight.

 Do not brew coffee with the carafe lid removed. Do not put any ice or other objects in the carafe before brewing.

The coffee may overflow, causing burns or electric shock.

Grip the water tank by its sides while holding the main body, and remove the tank.

Remove the lid of the water tank. Fill the tank with water up to the size you desire (for the REGULAR and STRONG modes, refer to the measurements on the HOT side). Attach the light to the water tank.

 Do not fill the water tank above the engraved MAX mark.

Doing so may cause an electric shock or malfunction.

Grip the water tank by its sides while holding the main body and insert the tank.

Brew coffee

1. Insert the power plug into the outlet. Press the power button to turn the power on.
   The operation display lamp and the power display indicator will light up. The mode indicator and the size indicator will light up, showing the settings selected the last time.
2. Press the mode button repeatedly to select the mode.
3. Press the size button repeatedly to select the size.
4. Press the start button to begin brewing.The brewing will start. The brew time is about 4 to 7 minutes, depending on the mode and the ambient temperature.
5. Make sure the brewing is completed and the operation display lamp is turned off.
6. Make sure no hot water remains in the dripper.
7. Remove the dripper. Discard the paper filter and the ground coffee. Discard the water remaining in the water tank as well.
8. Disconnect the power plug from the outlet.

Notes:

• Press the start button to suspend brewing. Press the start button again to resume.
• If the appliance is unattended for 5 minutes with the power turned on only or the brewing suspended, the power will be automatically turned off.
• Press the power button to stop brewing halfway. If the brewing continues, disconnect the power plug.

 For a short time after stopping brewing, do not touch the appliance anywhere other than the operation panel, the dripper handle, the carafe handle, or the power plug.

Hot water or steam may continue to be discharged for several seconds.

Operation panel

Operation of the main body during the brewing

Preheating of the heater is started with an operating sound. In the REGULAR and STRONG modes, steam is discharged from the bypass brewing spout to warm up the carafe after the preheating is completed.

Hot water is delivered from the nozzle to pre-wet the ground coffee for 25 to 40 seconds.

After that, hot water is repeatedly delivered and stopped while brewing the coffee.

When brewing is completed, the operation display lamp is turned off with the completion sound. The power is automatically turned off.

 Keep your face and hands away from the nozzle, the brewing spout, and the bypass brewing spout during brewing.

Steam spreads around the appliance during brewing. Be careful, as there is a risk of burns.

Pour the coffee

For REGULAR / STRONG

1. Remove the carafe from the main body.
2. Gently shake the carafe to even out the strength of the coffee.
3. Pour the coffee into cups.
   Empty the carafe so that no coffee remains.

For ICED

1. Remove the carafe from the main body.
2. Add some ice to the brewed coffee in the carafe.
   By adding ice, the strength will be evened out, and the ice put heat-resistant glasses or cups will melt more slowly.
   Right after brewing, be careful with the carafe lid because it is hot.
3. Gently shake the carafe to cool the coffee and even out its strength.
4. Put some ice into the heat-resistant glasses or cups.
5. Pour the coffee into the heat-resistant glasses or cups.
   Empty the carafe so that no coffee remains.

RECIPES

Recommended modes for staple beverages.

Hot Cafe au Lait

1. Brew coffee with the STRONG mode.
2. Warm some milk while brewing the coffee.
3. Pour 1 and 2 into cups.

Tips

We recommend warming the milk to about 140°F. Milk adds a mild sweetness and pairs well with coffee.

Iced Café au Lait

1. Brew coffee with the ICED mode.
2. Put some milk and ice into glasses.
3. Slowly pour 1 into 2.

Tips

Pour the coffee slowly to create a beautiful white and black gradation.

Coffee with Whipped Cream

1. Brew coffee with the STRONG mode.
2. Pour 1 cup into a cup and let it cool slightly.
3. Put whipped cream on top of 2.

Tips

Use low-fat cream to moderately bring out the flavor of the coffee.

Cleaning

Keep the appliance clean while using it and perform cleaning frequently.

Cleaning is to be performed every time after use

Wiping with a damp cloth
(main body)

Disconnect the power plug and let the main body cool before performing the procedure. Wipe the main body with a damp cloth or the like, with the water thoroughly wrung out. Dry the main body with a soft cloth or the like.

Cleaning with water

The following parts can be cleaned with water. Disconnect the power plug and let the main body cool before performing the procedure. Thoroughly dry the parts after cleaning them with water.

• When you clean the parts with detergent, use dishwashing detergent (neutral). Thoroughly rinse them with water and dry them with a soft cloth or the like. If moisture remains on the parts, it may cause deterioration or discoloration of the resin and the like, or scale accumulation.
• Use a sponge, soft cloth, etc.
• Do not use alcohols, acidic and alkaline detergents, benzine, thinners, cleansers, scrub brushes, etc.
• Do not use a dishwasher or dish dryer.

Note: Clean the dripper stand and the measuring scoop when residue is noticeable.

Cleaningis  is to be regularly performed about once per month or before storing the appliance

Cleaning run

The cleaning run uses an aqueous solution of citric acid to clean the main body. Prepare citric acid (one tablespoon). After cleaning the main body with the aqueous solution of citric acid, rinse the main body with fresh water and drain.

Cleaning with an aqueous solution of citric acid

1. Without using ground coffee or a paper filter, place the empty carafe with its lid attached and the dripper on the main body.
2. Put one tablespoon of citric acid and approximately 17 fluid ounces of water into a separate container and mix them well to prepare an aqueous solution of citric acid. Remove the water tank from the main body. Fill the water tank with the aqueous solution of citric acid up to HOT , and return the water tank to the main body.
3. Insert the power plug into the outlet and press the power button.
4. Select the REGULAR mode and L (Large), and press the start button.
   Be careful,,s hot water and steam will be discharged. When the cleaning with an aqueous solution of citric acid is completed, you hear the completion sound.
5. Discard the aqueous solution of citric acid in the carafe and the water tank.

Rinsing with fresh water and draining

1. Remove the water tank from the main body. Fill the water tank with water up to HOT , and return the water tank to the main body. Place the empty carafe on the main body with its lid attached.
2. Press the power button. Hold down the mode button and select the Cleaning mode. Press the start button to start rinsing.
   When rinsing with fresh water is completed and the water inside the main body is drained into the carafe, you hear the completion sound.
3. Discard the water in the carafe.
4. Repeat steps 1 to 3.
   Continue the procedure until no residue or smell of citric acid is noticeable.
5. Disconnect the power plug from the outlet.
6. Wipe the main body with a damp cloth or the like, with the water thoroughly wrung out. Dry the main body with a soft cloth or the like.

Specifications

When an Error Is Indicated

If a problem occurs, the operation display lamp and the indicators on the operation panel blink with the error sound.

Troubleshooting

Items Sold Separately

Consumables and exclusive parts are sold separately.

To purchase

https://us.balmuda.com/

Product Registration

Register your product to receive convenient product support and to sign up for news and exclusive offers.

Warranty Policy and Privacy Policy

For information on our warranty and privacy policies, please refer to the BALMUDA website (https://us.balmuda.com).

BALMUDA Inc. 5-1-21 Kyonancho, Musashino, Tokyo 180-0023, JAPAN
ImporterTranscosmosos America, Inc. 879 West 190th Street #410, Gardena, CA 90248

Note: Store this manual with great care.

For more manuals by BALMUDA, visit ManualsLibraryy

BALMUDA K06H The Brew Automatic Coffee Maker– FAQs