BLACK DECKER CM5000B 12-Cup Mill and Brew Coffee Maker
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury, including the following:
- Read all instructions
- Do not touch hot surfaces. Use handles or knobs.
- To protect against fire, electric shock, and injury to persons, do not immerse cords, plugs, or appliances in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Contact the Consumer Support department listed in these instructions.
- The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
- Do not use outdoors.
- Do not let the cord hang over the edge of the table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- To disconnect, turn any control to off, then remove the plug from the wall outlet.
- Do not use this appliance for other than intended use.
- Keep lid on the carafe when in use.
- Scalding may occur if the lid is removed during the brewing cycles.
- The carafe is designed for use with this appliance. It must never be used on a range top.
- Do not set a hot carafe on a wet or cold surface.
- Do not use a cracked carafe or a carafe having a loose or weakened handle.
- Do not clean the carafe with cleansers, steel wool pads or other abrasive material.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Scalding and/or burns may occur if the integrated grinder lid is removed during the brewing cycle.
- Check the grinder basket for presence of foreign objects before using.
- Only coffee beans and coffee grounds should be placed into the grinder basket.
- Avoid contact with moving parts.
GETTING TO KNOW YOUR MILL & BREW COFFEE MAKER
- Control panel
- Lift latch
- Lid
- Water reservoir cover
- Easy viewing water window
- Duralife™ glass carafe (Part# CM5000-01)
- Keep hot” carafe plate
- Coffee scoop (Part# CM5000-02).
GETTING TO KNOW YOUR MILL & BREW COFFEE MAKER
- 2-in-1 grinder and permanent filter basket (Part# CM5000-03)
- Washable brew basket (Part# CM5000-04)
- Lift latch
- Grinder lid
- Removable showerhead (press highlighted tabs to remove) (Part# CM5000-05).
MILL & BREW COFFEE MAKER PRODUCT BENEFITS
- Fresh Brew Timer: After the brew cycle is complete, the time since brewed will be displayed in 1-minute increments. This information will be in place of the digital clock during keep warm.
- 2-in-1 Grinder and Permanent Filter Basket: Whole coffee beans are ground and brewed in the same grinder assembly, allowing for fast brewing and easy clean-up.
- Eco-Friendly Permanent Filter: The high-performance Bronze Tone permanent filter eliminates the need for paper filters and minimizes any coffee staining appearance.
- Washable Brew Basket: The washable brew basket can easily be removed and washed after brewing, and is top rack dishwasher safe.
- Removable Showerhead: The coffeemaker’s showerhead is removable for easy cleaning.
- Auto Brew: The programmable Auto Brew delay start allows you to set the 24-hour timer to brew coffee at the selected time, day or night.
- Digital Clock with Backlighting: The LCD display features a programmable digital clock and backlighting for easy-viewing in low light conditions.
- Adjustable Auto-Shutoff: This feature allows you to select automatic shutoff times from 0-2 hours in 30 minute increments. The “Keep Hot” carafe plate will be activated until the automatic shutoff time is reached.
- Brew Strength Selector: Customize the flavor of your coffee by selecting from three brew strength settings: regular, strong, or bold.
- Sneak-A-Cup™: Can’t wait for the full pot of coffee to finish brewing? Sneak-A-Cup™ of coffee before brewing using this great feature, which stops the flow of coffee into your carafe. Replace the carafe back in the coffee maker within 20 seconds to prevent brew basket overflow.
- Grind Select: Cycles through optimal grind settings (4, 6, 8, 10, 12) correlating with the number of cups to be brewed, or turns the grinder OFF for brewing pre-ground coffee.
- Duralife™ Glass Carafe: Durable construction provides an extended carafe life. Water level markings make for easy filling and pouring.
- Non-stick “Keep Hot” Carafe Plate: This feature allows you to keep your carafe of coffee hot after brewing until the selected auto-shutoff time has been reached.
- Easy Viewing Water Window: The water window shows the amount of water in the reservoir for easy and accurate filling.
- Cord Storage: Keep excess cord out of the way and your countertop neat with simple cord storage.
GETTING TO KNOW YOUR CONTROL PANEL
- Clock / Backlit LCD Display
- Power: Turns the unit ON or OFF.
- Auto: Turns on the Auto Brew delayed start.
- Program: Auto Brew, press and release button once. Keep Warm, press and hold.
- Hour: Use to program the clock (see “Programming” section).
- Minute: Use to program the clock (or cycle through different keep warm settings when in that program mode to adjust “Keep Warm” time.)
- Grind: Cycles through optimal grind settings (4, 6, 8, 10, 12) correlating with the number of cups to be brewed. Also, turns the grinder OFF for brewing pre-ground coffee.
- Strong: Use to select the Brew Strength setting (3 levels) — No bars = regular (default setting), 1 bar = strong, 2 bars = bold.
BEFORE BREWING
- Carefully unpack your coffeemaker, removing all packaging materials, labels, and/or stickers from your coffeemaker.
- Clean your coffeemaker thoroughly before using it for the first time. Wash the Glass Carafe, Washable Brew Basket, 2-in-1 Grinder, and Permanent Filter Basket, and Removable Showerhead in warm, soapy water. Rinse and dry, then place back into your coffeemaker.
- Clean the inside of your coffeemaker by running two full brewing cycles with water only, no coffee.
- Pour fresh, cold water into the water reservoir up to the 12-cup MAX mark, then place the carafe on the warming plate.
- Plug cord into standard electrical outlet.
- Press the GRIND button until you reach the symbol to turn the grinder OFF ( ).
- Push the ON-OFF / Power Button to immediately brew water through the coffeemaker without adding coffee.
- Once the cycle is finished, discard water and rinse out the 2-in-1 Grinder and Permanent Filter Basket.
- Turn off appliance, unplug and allow to cool down for 15 minutes.
PROGRAMMING YOUR MILL & BREW COFFEE MAKER
Setting the Digital Clock:
- Plug the coffeemaker into a standard electrical outlet.
- The digital clock display flashes “12:00”.
- To set the time, press the HR button until the correct hour appears on the display. The “PM” symbol will appear in the upper right corner of the digital display for PM time settings.
- Press the MIN button to select minutes.
Note: If the unit is unplugged or power interrupted, the time will need to be reset, as will the Auto Brew delay start time.
Setting the Auto Brew Delay Start:
The programmable Auto Brew delay start allows you to set the 24-hour timer to brew coffee at the selected time, day or night. To activate the Auto Brew timer, follow the steps on the next page.
ELEMENTS TO BREW THE PERFECT CUP
Water Quality: A great cup of coffee starts with fresh, quality water. Since water represents more than 98% of brewed coffee, it is just as important as the coffee quality itself. The water you use should taste like fresh, good-quality drinking water, have an odorless aroma, and contain no visible impurities.
Grind Selection: The particle size of the coffee grind is vital for ensuring proper flavor and extraction. A coffee grind that is too coarse will allow water to pass through too quickly without proper extraction. A coffee grind that is too fine will lead to over-extraction and produce a bitter taste. Your Mill & Brew™ coffee maker comes with a Grind setting to select the optimal grind, correlating with the number of cups to be brewed and ensuring proper grind size for this type of coffee maker.
Coffee Freshness: A truly fresh cup of coffee only comes from freshly ground coffee beans. In fact, once a coffee bean is broken or ground, its flavor will begin to degrade over time. Your Mill & Brew coffee maker maximizes the freshness of your coffee by grinding the coffee beans just prior to brewing.
Proper Proportion: It is important to use the proper coffee-to-water ratio to produce a finished brew that isn’t too strong or weak. When using whole coffee beans or pre-ground coffee, we recommend using 1 tablespoon for every 1 cup of brewed coffee. This proportion may be adjusted to suit your individual taste, or try the Brew Strength Selector to customize your flavor!
BREWING COFFEE
- Fill the carafe with the desired amount of fresh, cold water and pour into the water reservoir. Do not fill with more than 12 cups of water.
- Close the water reservoir cover and place the carafe on the Keep Hot carafe plate.
- (a) Open the grinder lid using the lift latch and (b) add the desired amount of coffee into the 2-in-1 Grinder and Permanent Filter.
- Secure the integrated grinder lid back into place. Push the lid cover down until it snaps into place or until you hear a click. The coffee maker will not operate without the lid being closed, all grinder assembly parts in place, and the removable showerhead in place.
- Make sure the coffee maker is plugged into a standard electrical outlet.
- (a) If using whole beans, push the GRIND button to cycle through and select the optimal grind setting (4, 6, 8, 10, 12) correlating with the number of cups to be brewed.
(b) If using ground coffee, push the GRIND button to cycle through the grind settings until you reach the symbol to turn the grinder OFF for brewing pre-ground coffee. - To set the Auto Brew delay start, adjustable auto-off, and Brew Strength Selector, follow the detailed instructions in the “Programming your Mill & Brew” coffee maker section.
- Press the ON-OFF/Power Button just once to begin the brew cycle. If using whole beans, the brew cycle will automatically start after grinding.
- The Sneak-A-Cup™ feature allows you to pour a cup of coffee before the brewing cycle is complete. The carafe must be placed back into the coffeemaker within 20 seconds to prevent overflow. Replacing the carafe will restart the brewing process.
- Once the coffee grounds are cool, empty your brew basket and rinse after each brewing cycle just like a regular permanent filter.
CARE AND CLEANING
Cleaning your coffee maker, following the directions below is recommended after every use. This product contains no user serviceable parts.
Cleaning:
- Make sure your coffee maker is turned OFF, unplugged and allow to cool.
- Wipe the outside of your coffee maker and carafe warming plate with a soft, damp cloth.
- Remove the Washable Brew Basket and 2-in-1 Grinder and Permanent Filter Basket, and discard the coffee grounds.
- Wash the Removable Showerhead and 2-in-1 Grinder and Permanent Filter Basket by hand in warm soapy water.
- Wash the glass carafe and Washable Brew Basket either by hand in warm soapy water, or in the dishwasher (top rack only).
- To clean the inside of the cover and inside of the grinder assembly, open the cover, leave in the open position, and wipe it with a damp cloth.
Note: Do not use abrasive cleaners or scouring pads, and never immerse the coffee maker housing or power cord in water.
Descaling with Vinegar
With regular use, minerals and hard water can clog your coffee maker. A full cleaning with vinegar is recommended once a month.
- Pour white vinegar into the water reservoir up to the 6-cup mark on the water window. Add fresh, cold water up to the 10-cup mark.
- Put the 2-in-1 Grinder and Permanent Filter and Washable Brew Basket into the Mill & Brew™ Assembly and close the cover. Set empty carafe on the “Keep Hot” carafe plate.
- Push the GRIND button to cycle through the grind settings until you reach the symbol to turn the grinder OFF
- Push the ON-OFF / Power Button and let half the cleaning mixture brew into the carafe (until level is around 5-cup mark). Turn OFF coffee maker and let it soak for at least 15 minutes.
- Turn ON coffee maker again and brew remaining cleaning mixture into carafe.
- Turn OFF coffee maker and empty the carafe.
- Fill the water reservoir with cold water to the 11-cup line; replace carafe on the carafe plate and then turn ON coffeemaker for a complete brewing cycle to flush out remaining cleaning mixture. Repeat this step to completely remove the vinegar smell/taste.
- Wash the Removable Showerhead, Washable Brew Basket, 2-in-1 Grinder and Permanent Filter Basket, and glass Carafe as instructed in the Care and Cleaning Table.
TROUBLESHOOTING

WARRANTY AND CUSTOMER SERVICE INFORMATION
For service, repair, or any questions regarding your appliance, call the appropriate 800 number listed within this section. Please DO NOT return the product to the place of purchase. Also, please DO NOT mail the product back to the manufacturer, nor bring it to a service center. You may also want to consult the website listed on the cover of this manual. Two-Year Limited Warranty (Applies only in the United States and Canada)
What does it cover?
Any defect in material or workmanship provided; however, Applica’s liability will not exceed the purchase price of product.
For how long?
Two years from the date of original purchase with proof of purchase.
What will we do to help you?
Provide you with a reasonably similar replacement product that is either new or factory refurbished.
How do you get service?
- Save your receipt as proof of date of sale.
- Visit the online service website at [www.prodprotect.com/applica](http://www.prodprotect.com/applica), or call toll-free 1-800-231-9786, for general warranty service.
- If you need parts or accessories, please call 1-800-738-0245.
What does your warranty not cover?
- Damage from commercial use
- Damage from misuse, abuse, or neglect
- Products that have been modified in any way
- Products used or serviced outside the country of purchase
- Glass parts and other accessory items that are packed with the unit
- Shipping and handling costs associated with the replacement of the unit
- Consequential or incidental damages (Please note, however, that some states do not allow the exclusion or limitation of consequential or incidental damages, so this limitation may not apply to you.)
How does state law relate to this warranty?
This warranty gives you specific legal rights. You may also have other rights that vary from state to state or province to province.
For More Manuals By Black and Decker , Visit ManualsLibraryy.