Richmat HJH92E Ble Smart Home Remote Control
Remote control button map
Remote control function description
Remote control function description| Button label | Features |
| Press the flashlight to light up, release the flashlight to extinguish (default 10S) Reuse function: ① Press and hold the key for 5s, the backlight will flash and enter the memory mode. Press ZG/SNORE/M1 within 2s, the buzzer will ring, and the current motor position, the status of the massager and the light bar can be memorized. ② Press and hold the flashlight+LOCK for about 11s at the same time, the backlight will flash, and all the buttons on the remote control will enter the one button release mode. You can reset all the memory positions to the factory default memory positions at the same time. ③ At the same time, press and hold the flashlight+FLAT for about 6s, the backlight flashes, all buttons on the remote control enter the continuous pressing mode, and release the button to stop the motor. |
 | The head motor extends and stops when it is released |
 | Head motor retracted, released and stopped |
 | Press the key for about 5s, the backlight flashes for 3 times, and the remote control is locked (except for the flashlight, the other keys are locked, and the backlight flashes when pressing); Press the button for about 5s, the backlight flashes 3 times, and the remote control is unlocked; |
 | FLAT one button reset, all motors retract to the minimum stroke position, close the massager, and keep the state before pressing the button (no reset when powered on) |
 | The foot motor extends and stops when it is released |
 | The foot motor retracted, released, and stopped |
 | Bedlight on/off (always on) |
 | Head and foot motors extend, release, and stop |
 | Head and foot motors retract, release, and stop |
| The motor runs to the SNORE position with one key. In the one-key release mode, the motor is leveled and closed 15 minutes later. Press any key to exit the timing; The continuous pressing mode has no timing. Reuse function: Long press the flashlight for about 5s, and the backlight will flash, press SNORE within 2s, the buzzer will ring, and the current motor position, massager, and light bar status will be recorded to SNORE. (Power off without clearing) |
| The motor runs to the ZG position with one key. Reuse function: long press the flashlight for about 5s, the backlight will flash, press ZG within 2s, the buzzer will ring, and the current motor position, massager and light bar status will be recorded to ZG. (Power off without clearing) |
| The motor moves to the M position with one key. Reuse function: long press the flashlight for about 5s, the backlight will flash, press M within 2s, the buzzer will ring, and the current motor position, massager and light bar status will be recorded to M. (Power off without clearing) |
Precautions
To protect the reliability and safety of the motor and control box, do not switch the buttons frequently
Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- (1) This device may not cause harmful interference
- (2) This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
For more manuals by Richmat, visit ManualsLibraryy
Richmat HJH92E Ble Smart Home Remote Control-FAQs
What is the Richmat HJH92E BLE Smart Home Remote Control used for?
The Richmat HJH92E BLE is typically used to control adjustable bed systems, including raising/lowering the head and foot sections, activating massage features, and managing pre-set positions.
How do I pair the Richmat HJH92E remote with the bed?
To pair the remote:
Disconnect the bed from the power source.
Reconnect it after a minute and press the “pairing” button on the bed’s control box.
Hold specific remote buttons (e.g., “head up” and “foot down”) until you hear a beep indicating successful pairing.
What should I do if the remote stops responding?
Check the batteries and replace them if necessary.
Ensure there’s no obstruction blocking the infrared signal.
Try resetting the remote by holding the reset button on the control box while pressing the pairing buttons on the remote
Can I control the bed from my smartphone with this remote?
Yes, the HJH92E BLE supports Bluetooth functionality, enabling it to connect with compatible smartphone apps for enhanced control options.
How can I fix unresponsive buttons on the remote?
Clean the remote buttons with a cotton swab and rubbing alcohol to remove dust or debris. If the issue persists, inspect for physical or water damage
Does the remote have a child lock feature?
Yes, the child lock prevents accidental button presses. To disable it, press and hold the lock button for about 5 seconds until the backlight blinks
What are the pre-set functions of the HJH92E BLE remote?
It typically includes pre-set positions such as “zero gravity,” anti-snore, and memory settings that can be customized for convenience.
How do I reset the HJH92E BLE remote?
Locate the control box under the bed, press the “reset” button while holding specific buttons (e.g., “foot up” and “head down”) on the remote until a beep confirms the reset
Can this remote be used with dual control beds?
Yes, the HJH92E BLE supports dual control setups. Follow the synchronization steps to pair two remotes with the bed’s control boxes
What should I do if the remote’s Bluetooth disconnects?
Ensure that the control box is powered on. If the remote enters sleep mode, press any button to wake it and reconnect via Bluetooth