Otium Bluetooth Headphones User Manual

Otium Bluetooth Headphones

Package Contents

• 1 x wireless sports headphone
• 6 x Ear Buds /1 x Cable Clothing Clip/ 1 x Line buckle
• 1 x USB Charging Cable
• 1 x User Guide

Product Overview

How to connect

1. Keep your Bluetooth device within 1 meter of your wireless headphones when pairing.
2. Enter pairing mode as follows: First, ensure your headphones are off. Next, press and hold the MFB for approximately eight seconds. You will know that the device has entered pairing mode when the red and blue LEDs flash rapidly.
3. Using your Bluetooth device, scan/search for available Bluetooth devices. Select the headphone from the list of devices shown.
4. If prompted for a password or PIN, enter the following: 0000
5. Some cell phone models can connect automatically, and others will provide a prompt. If prompted by your cell phone to connect, select ‘Yes’. Warming: Please dry the headphones after each work

Multi-pairing

1. Start by long-pressing the MFB for three seconds to turn the wireless headphones off. Next, long-press the MFB for about eight seconds, until the red and blue LEDs on the headphone flash repeatedly. This indicates entry to the search and pairing state.
2. Turn on the Bluetooth of your mobile phone and search for the headphones, then click to complete the connection.
3. Turn off your mobile phone’s Bluetooth. Then turn off the headphones by long pressing the MFB until the red LED turns on.
4. Long-press the MFB for three seconds to turn it on again. Then long-press the MFB for eight seconds until you see the red and blue LEDs on the headphone flash repeatedly again, indicating entry to the search and pairing state.
5. Turn on the Bluetooth function of mobile phone #2. Search for the headphone and click to complete the connection.
6. Turn on mobile phone #1’s Bluetooth function and find the connected wireless headphones. Click to complete the connection.

Reconnect the headphones

1. If the connection is lost, your headphones will attempt to reconnect automatically.
2. If your wireless headphone is not able to reconnect automatically, press the MFB once or use your cell phone’s Bluetooth settings to reconnect manually.

Specifications

• Input Power: 5V=1A
• Support Protocols: HFP/A2DP/AVRCP/SPP
• Support Codec: SBC/AAC
• Talk Time: About 12 Hours
• Music Time: About 15 Hours
• Standby Time: About 250 Hours
• Charging Time: About 2 Hours

Charging

Your headphone comes with a built-in rechargeable battery. Before using the device for the first time, it is recommended to charge the battery fully.

• Connect the headphones to your USB charger.
• The red LED indicates the device is charging
• Blue LED indicates the device is fully charged
• It takes 1.5-2 hours to charge the battery fully.
• Please note that the input power should be no more than DC 5V/1A, to avoid potential damage to the headphone. Warming: Please avoid using a low-quality USB charger

Restore to factory settings

Long-press the MFB button for about three seconds while charging. The red and blue LEDs will flash three times to indicate that factory settings have been restored.

Common problems and solutions

The cell phone does not detect the headphones

Solutions:

1. Confirm that the wireless headphone is turned on and in pairing mode. If the blue and red LEDs are flashing alternately, the headphone is in pairing mode.
2. If the wireless headphone is turned on but still can’t be found on your Bluetooth device, restart both the cell phone and the wireless headphone and then try again.

After connecting the wireless headphones to your mobile phone, you experience disconnections or low sound quality.

Solutions:

1. This wireless headphone may have a low battery. Recharge the device as needed.
2. There may be an obstacle between your cell phone and the wireless headphones. Ensure this is not the case. You should be aware that your hand may obstruct communication if you are holding it against the headphones. Make sure the line of communication is clear of any obstruction between these two devices.
3. Your wireless headphones may be out of range. Try to move it closer to your cell phone for best results.

The wireless headphone has connected successfully, but you can’t listen to music.

Solutions:

1. Some cell phones do not have a complete Bluetooth function and a stereo Bluetooth module that is required to listen to music. Please test whether this is the case by connecting your wireless headphones to another cell phone. If you can listen to music through the other cell phone, the wireless headphones are functioning as they should.
2. Check your Bluetooth settings for hands-free mode.

How to use wireless headphones to listen to music or chat on a computer?

Solutions

• If your computer has a Bluetooth function, simply open it and search for the wireless headphones.
• If your computer does not have a Bluetooth function, then you will need a wireless adapter in order to connect your computer to the headphones. We recommend IVT wireless adapters.

What’s the Bluetooth pairing password?

Solutions:

• The Bluetooth pairing password is 0000. Only a very small proportion of cell phones require manual password entry. Most cell phones enter this password automatically.

Do these block out outside noise to a good degree? How does its noise cancellation function work?

Solution:

• The headphone features passive noise cancellation. Please try silicone ear tips; they won’t block sound from your environment like foam ones. It could prevent higher-frequency noise from reaching the ear, it has have passive noise isolation function – soundproofing.

What is the Bluetooth connection range?

Solution:

• The available distance between the Bluetooth headphone and the mobile phone or other Bluetooth devices is about 30ft in Open Space and up to 10ft in Inner Space. It would lose connection or cause noise while outside the Bluetooth connection range.

How to connect two smartphones at the same time?

Solution:

• Please turn on the headphones. When it is in pairing mode, turn on the first phone’s Bluetooth, and connect the headphones to the first smartphone via Bluetooth. After connecting successfully, turn off the first smartphone’s Bluetooth and turn on the second smartphone’s Bluetooth. Connect the headphones to the second smartphone via Bluetooth, then turn on the first smartphone’s Bluetooth again and connect it to the headphones. And it would finally show that both smartphones are successfully connected to the headphones.

How is the waterproof level of the headphone?

Solution:

• The headphone is coated with nano waterproof material. The headphone will not be damaged by rain or even in the shower, but we strongly do not recommend using them in a pool.

The red light is not on when charging.

Solution:

• If the Bluetooth headphone has not been used for a long time, it may need to be charged. Try charging the headphones for 30 minutes. The red light should come on again.

How long does this headphone last before it needs to be charged?

Solution:

• The headphone has a better battery efficiency with up to 15 hours of play. Its standby time is about 220 hours without use.

The headphone could not hold a charge anymore?

Solution:

• There might be two reasons. One is that the charging cord is broken. Please try to use another charging cord to charge the headphones. Another one is that there might be something wrong with the battery. If it is kept for too long a time without using and charging, the capacity and the life of the battery will be reduced.

Warranty

We guarantee every product has undergone rigorous tests prior to shipping. We are so confident in the quality of our products that we offer a one-year warranty from the date of purchase.

Note: This headphone conforms to the IPX7 waterproof standard:

For More Manuals By Otium, Visit ManualsLibraryy.

Otium Bluetooth Headphones-FAQs