Hamilton Beach 49945 FlexBrew Single-Serve Coffee Maker
IMPORTANT SAFEGUARDS
- Read all instructions.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety.
- Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance.
- Do not touch hot surfaces. Use handles or knobs. Care must be taken, as burns can occur from touching hot parts or from spilled hot liquid.
- To protect against electric shock, do not place the cord, plug, or coffee maker in water or other liquid.
- Unplug from outlet when the coffee maker is not in use and before cleaning. Allow to cool before putting on or taking off parts and before cleaning the appliance.
- The coffee maker must be operated on a flat surface away from the edge of the counter to prevent accidental tipping.
- Do not operate any appliance with a damaged supply cord or plug, or after the appliance malfunctions, or has been dropped or damaged in any manner. Supply cord replacement and repairs must be conducted by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard. Call the provided customer service number for information on examination, repair, or adjustment 9. The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
- Do not use outdoors.
- Do not let the cord hang over the edge of the table or counter or touch hot surfaces, including the stove.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- WARNING! To avoid hot water spraying from the piercing needle, do not lift the lid during the brew process.
- Do not use the appliance for anything other than its intended use.
- WARNING! To reduce the risk of fire or electric shock, do not remove the bottom cover of the coffee maker. There are no user-serviceable parts inside. Repair should be done by authorized service personnel only.
- CAUTION! Cut Hazard: Removable single-serve pack holder contains a sharp needle. Use caution when handling.
- CAUTION! Cut Hazard: Piercing needle is sharp. Use caution when cleaning. When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:
SAVE THESE INSTRUCTIONS
Other Consumer Safety Information: This appliance is intended for household use only. WARNING Electrical Shock Hazard: This appliance is provided with a polarized plug (one wide blade) to reduce the risk of electric shock. The plug fits only one way into a polarized outlet. Do not defeat the safety purpose of the plug by modifying the plug in any way or by using an adapter. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, have an electrician replace the outlet.
The length of the cord used on this appliance was selected to reduce the hazards of becoming tangled in or tripping over a longer cord. If a longer cord is necessary, an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the rating of the appliance. Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or accidentally tripped over. To avoid an electrical circuit overload, do not use another high-wattage appliance on the same circuit as this appliance.
Parts and Features
To order parts: US: 1.800.851.8900
www.hamiltonbeach.com
Canada: 1.800.267.2826
Mexico: 01 800 71 16 100
How to Brew a Single-Serve Pack
WARNING: Burn Hazard. If overflow occurs, unplug and allow the coffee maker to cool. To avoid hot coffee overflowing:
- Fill the reservoir with a cup or travel mug of water into which coffee will be brewed.
- Fully insert the cup or travel mug on the drip tray.
- Do not lift the lid during the brewing process.
- If the brew process is stopped early, water must be drained from the unit.
- Place a large mug on the drip tray/cup rest. Press the BREW REG or BREW BOLD button. Failure to drain the unit can cause the next cup brewed to overflow.
CAUTION: Cut Hazard. Removable single-serve pack holder has a sharp needle. The piercing needle on the underside of the lid is also sharp. Use caution when handling.
NOTES:
- Use only cold water in the reservoir. Do not use hot water.
- Do not reheat coffee in the machine.
- Do not use creamer or nondairy creamer in the reservoir.
- After brewing hot cocoa single-serve packs, brew a water-only cycle without a single-serve pack to avoid the possibility of clogging the piercing needle.
- The coffee maker brews all the water added.
- Press the BREW REG or BREW BOLD button again to STOP brewing mid-cycle. The remaining water must be removed. See warning statement above.
- If the brew indicator light flashes three times, the lid is not closed. Lower the lid until it clicks to lock. Press the BREW REG or BREW BOLD button.
- Do not brew coffee without a removable needle holder locked into place.
- Plug into the outlet.
- Lift the lid latch until the lid clicks into place.
- Insert the funnel in the opening. Place the gray removable single-serve pack holder in the funnel, aligning the handle with the funnel handle.
- Place a pack into a single-serve pack holder. Do not remove foil.
- Close lid and snap in place to pierce single-serve pack.
- Lift the water reservoir lid.
- Fill the cup or travel mug into which coffee will be brewed and add water to the water reservoir. 10 oz. (296 ml) of water is for single-serve packs.
- Close the lid.
- Use the cup rest for a cup or mug, and remove the cup rest for a travel mug.
- Press the BREW REG or BREW BOLD button to start brewing. The brew indicator light will light up to show that the coffee maker is brewing. The coffee maker will shut off automatically when brewing is complete.
- Press the BREW REG or BREW BOLD button to turn off. Unplug.
- Funnel and single-serve pack holder should be rinsed after every use.
How to Brew Single-Serve Ground Coffee
WARNING: Burn Hazard. If overflow occurs, unplug and allow the coffee maker to cool. To avoid hot coffee overflowing:
- Fill the reservoir with a cup or travel mug of water into which coffee will be brewed.
- Fully insert the cup or travel mug on the drip tray.
- Remove the single-serve pack holder before adding coffee grounds to the brew basket.
- To avoid overflow, keep ground coffee below the MAX fill line.
- Do not lift the lid during the brewing process.
- If the brew process is stopped early, water must be drained from the unit. Place a large mug on the drip tray/cup rest.
- Press the BREW REG or BREW BOLD button. Failure to drain the unit can cause the next cup brewed to overflow.
CAUTION: Cut Hazard. The piercing needle on the underside of the lid is sharp. Use caution when handling.
NOTES:
- Use only cold water in the reservoir. Do not use hot water.
- Do not reheat coffee in the machine.
- Do not use creamer or nondairy creamer in the reservoir.
- Do not use hot cocoa powder or mix it in the brew basket.
- The coffee maker brews all the water added.
- If finer ground coffee is used, the coffee will continue to drip after the light has gone off.
- Press the BREW REG or BREW BOLD button again to STOP brewing mid-cycle. The remaining water must be removed. See warning statement above.
- If the brew indicator light flashes three times, the lid is not closed. Lower the lid until it clicks to lock. Press the BREW REG or BREW BOLD button.
- Do not brew coffee without a removable brew basket with the lid closed in place.
- If you have sediment from coffee, add a #1 paper cone coffee filter to the brown removable brew basket.
- Do not brew coffee without a removable needle holder locked into place.
- Plug into the outlet.
- Lift the lid latch until the lid clicks into place.
- Insert the funnel in the opening. Open the brew basket lid; then place the brown removable brew basket on the countertop.
- Add ground coffee to the brown removable brew basket (3 tablespoons [44 ml]) maximum.
- Close the brew basket lid. Place the brew basket in the funnel, aligning the handle with the funnel handle.
- Close the lid and snap it in place to latch the lid closed.
- Lift the water reservoir lid.
- Fill the cup or travel mug into which the coffee will be brewed and add water to the water reservoir.
- Close the water reservoir lid.
- Use the cup rest for a cup/mug, OR remove the cup rest for a travel mug.
- Press the BREW REG or BREW BOLD button to start brewing. The brew indicator light will light up to show that the coffee maker is brewing. The coffee maker will shut off automatically when brewing is complete.
- Press the BREW REG or BREW BOLD button to turn off. Unplug.
- The funnel and brew basket should be rinsed after every use.
Care and Cleaning
WARNING: Shock Hazard. Do not immerse the cord, plug, or coffee maker in any liquid. CAUTION: Cut Hazard. Removable single-serve pack holder has a sharp needle. The piercing needle on the underside of the lid is also sharp. Use caution when handling.
General Cleaning
All coffee makers should be cleaned at least once a month (once a week for areas with hard water).
- Unplug and allow to cool.
- Hand-wash all removable parts in hot, soapy water. Rinse and dry or wash in the TOP RACK of the dishwasher. DO NOT use the “SANI” setting when washing in the dishwasher. “SANI” cycle temperatures could damage your product.
- Wipe the outside of the coffee maker with a soft, damp cloth.
Routine Cleaning
- Plug into the outlet.
- Pour 3/4 cup (177 ml) of plain white vinegar and 3/4 cup (177 ml) of cold water into the reservoir.
- Place a 14-oz. (414-ml) or larger cup or travel mug underneath to catch water/vinegar solution. Press the BREW REG or BREW BOLD button once. When the solution starts dispensing, press the BREW REG or BREW BOLD button again to stop brewing and allow vinegar to clean. After 30 minutes, press the BREW REG or BREW BOLD button and allow it to finish the brew cycle. When the brew cycle is finished, empty the cup and rinse. Run 2 to 3 cycles of cold tap water. The unit is cleaned and ready to brew coffee.
- Unplug.
Clogged Needle
- Unplug and allow to cool.
- Remove the gray removable needle holder in the lid by turning the arrow from the locked icon
to the unlocked icon.
- Bend a small paper clip. Insert the tip of a paper clip through the hole of the piercing needle and up into the shaft of the piercing needle to ensure grounds have been removed.
- To replace the gray removable needle holder, insert the tab between the lock icon
and unlock icon
and turn to the right to lock.
Troubleshooting
Coffee maker will not brew/coffee not dispensing.
- The piercing needle may be clogged. Always remove the gray removable needle holder. Clean the piercing needle in the lid of the coffee maker as shown on page 6.
- Mineral deposits have formed. Clean the coffee maker following the directions in the Care and Cleaning section.
- Too little water. Need 6 oz. (177 ml) or more.
Coffee tastes bad.
- Too much water was added, or too much or too little ground coffee was added. Change the amount of water to coffee grounds or use less water with coffee packs.
- Poor coffee quality and freshness.
- Poor water quality (use filtered or bottled water).
Coffee sediment in cup.
- Try a more coarsely ground coffee or add a #1 paper cone coffee filter to the brew basket. Make sure the hinged lid is closed on the removable brew basket.
Water on counter under unit.
- Overfilled water reservoir. Do not add more than 14 ounces (414 ml) of water. Some mugs/cups do not pour cleanly and can dribble water down the side of the cup and onto the counter.
Coffee overflows from brew basket.
- Use a removable brew basket with a lid for ground coffee.
- Use a lesser amount of ground coffee. 3 tablespoons (44 ml) is the maximum amount of grounds to brew.
- When using whole bean coffee, a standard automatic drip coffee grind will yield the best results. Be careful not to overgrind, since very finely ground coffee can cause overflow.
- The black seal around the needle in the removable needle holder is missing. Carefully place the seal around the needle and push until in place.
Coffee overflows from mug or travel mug.
- To prevent coffee overflowing from a mug/travel mug, use the same mug/travel mug to brew into that was used to fill the water reservoir. Do not add more than 14 ounces (414 ml) of water. There may also be additional water in the system that is causing overflow. Remove the brew basket or single-serve pack holder. Press and hold the BREW REG or BREW BOLD button to remove any remaining water.
Water remaining in reservoir.
- Added too much or too little water. Place a cup or travel mug on the drip tray. Remove the single-serve pack and replace the brew basket. Repeat brewing cycle. Press and hold the BREW REG or BREW BOLD button to remove any remaining water.
Coffee single-serve pack burst.
- There is variability in the single-serve pack manufacturing process, which causes some types of single-serve packs to be weaker at seams, so the foil seal fails. Try a different brand.
Brew indicator light flashes:
- 2 times: The Coffee maker needs to be cleaned. See page 6.
- 3 times: The Coffee maker lid is not closed properly. Push the lid down to lock into place.
- 7 times: The Coffee maker needs to be cleaned. See page 6.
- 8 times: The Needle is clogged. Always remove the gray removable needle holder and follow “Clogged Needle” on page 6.
- 9 times: Not enough water. Add water to the water reservoir.
Limited Warranty
This warranty applies to products purchased and used in the U.S. and Canada. This is the only express warranty for this product and is in lieu of any other warranty or condition. This product is warranted to be free from defects in material and workmanship for a period of five (5) years from the date of original purchase in Canada and one (1) year from the date of original purchase in the U.S. During this period, your exclusive remedy is repair or replacement of this product or any component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us and our returning a product or component under this warranty to you.
If the product or component is no longer available, we will replace it with a similar one of equal or greater value. This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions, or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for anything other than single-family household use or subjected to any voltage and waveform other than as specified on the rating label (e.g., 120 V~60 Hz).
We exclude all claims for special, incidental, and consequential damages caused by breach of express or implied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you.
To make a warranty claim, do not return this appliance to the store. Please call 1.800.851.8900 in the U.S. or 1.800.267.2826 in Canada or visit hamiltonbeach.com in the U.S. or hamiltonbeach.ca in Canada. For faster service, locate the model, type, and series numbers on your appliance.
For More Manuals By Hamilton Beach, Visit ManualsLibraryy.
Hamilton Beach 49945 FlexBrew Single-Serve Coffee Maker-FAQs
How long does it take to brew a cup?
The FlexBrew brews a single cup in about 90 seconds using either a pod or ground coffee.
What pods are compatible with the Hamilton Beach FlexBrew?
It works with K-Cup® pods, Nespresso® capsules (on select models), and ground coffee using the included basket.
How much coffee should I use with ground coffee?
Use one tablespoon of ground coffee per 6 ounces of water. For stronger coffee, add slightly more grounds.
Does the FlexBrew come with a filter?
Yes. It includes a gold-tone permanent filter, so you don’t need paper filters when brewing ground coffee.
Does the Hamilton Beach FlexBrew shut off automatically?
Yes. It features an auto shut-off for safety and energy efficiency after brewing.
Why does my FlexBrew say “Overload”?
This usually means the top needle is clogged with coffee grounds. Clean the needle carefully to restore normal brewing.
What does “Fill H2O” mean?
It indicates the machine cannot detect enough water in the reservoir. Refill the tank, making sure it’s properly seated.
Why isn’t my FlexBrew pumping water?
Check that the reservoir is filled and correctly placed. If still not working, run a vinegar cleaning cycle to remove mineral buildup.