DS18 ENSBTRC-SQ Bluetooth Marine Universal Radio Stereo User Manual

DS18 ENSBTRC-SQ Bluetooth Marine Universal Radio Stereo

ENSBTRC-SQ

Congratulations on the purchase of the ENSBTRC-SQ. It has been designed, engineered, and manufactured for the highest level of performance and quality.

FEATURES

MARINE WATERPROOF UNIVERSAL BT STREAMING AUDIO RECEIVER WITH CONTROLLER

Inputs & Outputs

• USB Port
• USB Charging (2A)
• Two RCA Line Out
• AUX Input

• Designed for marine and powersports applications
• IPX6 water resistance rating
• For All Elements
• BT 5.0 A2DP connectivity
• Wireless connection range up to 35ft*
• USB Input to play your favorite music files
• 3.5mm jack auxiliary audio input
• RCA Pre-output and remote turn-on to connect external amplifiers
• Use it as a stand-alone source unit/receiver
• Easy to use – LED illuminated push buttons
• Surface-mount enclosure design for easy installation
  *Conditions may vary the maximum range

WARNING

While we have designed the mounting system to provide a safe and stable installation, it is important to remember that these are objects that will be used in an environment that is extremely bumpy and turbulent.

Please consider all possible scenarios where these will be placed and secured.

All specifications are subject to change without notice

INSTALLATION

UNIVERSAL BT CONTROLLER

OPERATIONS – CONTROLS

1. USB Port: Connect a USB Drive up to 32Gb with MP3/WMA Audio Files.
2. 3.5mm Jack Audio Input: Analog Audio Auxiliary input using a stereo plug wire.
3. Red Wire: ACC, connect this to an Accessory switch or a Master Switch, which allows you to turn on/off the device to avoid the battery from discharging when not in use.
4. Black Wire: Negative/Ground, Connect this directly to the Negative post or chassis ground.
5. Blue Wire: Remote Output, connect this to the external amplifier.
6. RCA Pre-Output: Audio Signal to the external amplifier (White: Left Ch, Red: Right Ch)
7. Yellow Wire: Power +12V, connect directly to the battery source (positive)

BUTTONS

1. Long press for 3 seconds for Power on/ off, short press for switching BT / Aux in / USB mode
2. Short press for play/pause, Long press for LED on / off
3. Short-press for the previous song
4. Short press for the next song
5. VOL +: Short press to increase volume by one scale, long press to continuously increase volume
6. VOL -: Short press to increase volume by one scale, long press to continuously increase volume

CONTROLS FUNCTION

1. 
   • FUNCTION:
     Press 3 seconds for power on. After returning to the ENSBTRC-SQ, the default red button’s back light is always on. After powering on, the blue indicator flashes quickly, the BT is in search mode, and the old connected device will be searched synchronously and paired. When the device is searched, the blue indicator stays on. The blue indicator flashes quickly during the connection process and is always on after connecting.
   • REMARK: 
     Each time you switch the source mode, you must set the volume back to 1/3 of the total volume.
2. 
   • FUNCTION:
     When playing music in BT / AUX IN / USB mode, short-press for play/pause (AUX is mute); the corresponding indicator light ashes during pause long Long-press for 3 seconds to control the button’s back light to turn on and off.
   • REMARK:
     Indicator light:
     Blue: BT
     Red: AUX in
     Purple: USB
3. 
   • FUNCTION:
     When playing music in BT or USB mode, short-press for the previous song.
4. 
   • FUNCTION:
     When playing music in BT or USB mode, short-press for the next song.
5. VOL +
   • FUNCTION:
     When playing music in BT / AUX IN / USB mode, short-press to increase volume by one scale; long-press to continuously increase volume. There is a beep when the volume is at its maximum, and it will keep beeping if pressed.
6. VOL –
   • FUNCTION:
     When playing music in BT / AUX IN / USB mode, short-press to decrease volume by one scale; long-press to continuously decrease volume.
7. Connection BT
   • FUNCTION:
     When BT is connected and playing music, the blue light will always be on, and the volume will be synchronized with the phone. When the device is connected, but it is not playing any sound, the blue indicator will flash slowly. BT device Name: ENSBTRC-SQ
8. Auto connect function
   • FUNCTION:
     BT will be disconnected if it exceeds the receiving range. The blue indicator light flashes quickly when BT is in a searching situation and waiting for a connection. When the device returns to the range, it will be automatically reconnected; the blue indicator light is always on. Press play to continue playing music, and the volume is the same as earlier disconnection. While the device is not in range, other devices can connect to BT.

MEASUREMENT

SPECIFICATIONS

• Frequency Response ……………………………..20Hz-20KHz
• Signal to Noise Ratio …………………………………………….>86dB
• T.H.D: ……………………………………………………………………<0.1%
• Channel Separation ………………………………………………>68dB
• Voltage Operation ………………………………………… DC 12-14.4V
• Fuse Size …………………………………………………………….. 5 Amp
• BT Version ……………………………………………………………… 5.0
• Wireless Range …………………….>35 ft (Conditions May Vary)
• Waterproof Rating ………………………………………IPX6
• USB Charging Capacity ……………………………………… 2 Amp
• USB Files Format Compatible ……………….MP3 / WMA

FEATURES

• RCA Line Out (Pre-Amp) ……………………………………………….. 1 Pair (Left & Right) 2V
• Aux Line Input  ………………………………………………. Plug 3.5mm
• Remote Out ………………………………………………………………< 200mA
• USB Player …………………………………….. Up to 32 Gb / Hasta 32Gb
• Buttons | Controls ………………………….Power/Source/Play/Pause/Next/Prev/ Vol+/Vol-
• Illumination ……………………………….Red Back light
• Body Material / Color / Finish……………………. ABS Black Housing / Rubber Buttons

MEASUREMENT

• Overall Length ………………………………………………………. 3.97″ / 100.9mm
• Overall Height ………………………………………………………………3.17″ / 80.7mm
• Overall Depth …………………………………………………………1.73″ / 44mm

FOR MORE INFORMATION, PLEASE VISIT DS18.COM

For more manuals by DS18, visit ManualsLibraryy

DS18 ENSBTRC-SQ Bluetooth Marine Universal Radio Stereo- FAQs