Ninja BL770 Series Mega Kitchen System User Guide

Ninja BL770 Series Mega Kitchen System

TECHNICAL SPECIFICATIONS

• Voltage: 120V~, 60Hz
• Power: 1500 Watts
• Pitcher Capacity: 72 oz. (9 cups, 2.15 L)
• MAX Liquid Capacity: 64 oz. (8 cups, 1.9 L)
• Bowl Capacity: 64 oz. (8 cups, 1.8 L)
• Nutri Ninja® Cup Capacity: 16 oz. (2 cups, 470ml)

PARTS

There are a variety of accessories that are compatible with this blender series.

NOTE: The top flap of your box shows the select accessories that are included with your model.

To purchase more accessories and find great recipes, visit ninjakitchen.com.

PARTS

• A Pitcher Lid with Locking Handle
• B 72 oz.* Blender Pitcher
• C Motor Base (attached power cord not shown)
• D Stacked Blade Assembly (pitcher)
• E To-Go Lid
• F Nutri Ninja® Blade Assembly
• G 16 oz. Nutri Ninja Cup
• H Bowl Lid with Locking Handle
• I 64 oz. Food Processor Bowl
• J Dough Blade Assembly (bowl)
• K Chopping Blade Assembly (bowl)
  *64 oz. Max liquid capacity.

NOTE: Blade Assemblies are not interchangeable.

NOTE: The Number of cups and lids varies by model.

BEFORE FIRST USE

IMPORTANT: Review all warnings on pages 4–7 before proceeding.

DID YOU KNOW?

• You can take your drinks on the go using the spout lid.

NOTE: All attachments are BPA-free and dishwasher safe. It is recommended that the containers, lids, and blade assemblies be placed on the top rack of the dishwasher. Ensure blade assemblies and lids are removed from the containers before placing them in the dishwasher. Exercise care when handling blade assemblies.

1. Remove all packaging materials from the unit. Exercise care when unpacking blade assemblies, as the blades are sharp.
2. The Chopping Blade Assembly and Stacked Blade Assembly are NOT locked in place in their containers. Handle the Chopping Blade Assembly and Stacked Blade Assembly by grasping the top of the shaft.
3. Handle the blade assemblies by grasping around the perimeter of the blade assembly base.
4. Wash containers, lids, and blade assemblies in warm, soapy water using a dishwashing utensil with a handle to avoid direct contact with the blades. Exercise care when handling blade assemblies, as the blades are sharp.
5. Thoroughly rinse and air-dry all parts.
6. Wipe the otor base with a soft cloth. Allow it to dry completely before using.

USING THE BLENDER PITCHER

IMPORTANT: Review all warnings on pages 4–7 before proceeding.

IMPORTANT: As a safety feature, the power button () will flash and the motor will not work if the pitcher and lid are not installed correctly. When the pitcher and lid are installed properly, the power button () will be solid, indicating that the appliance is ready for use.

NOTE: DO NOT add ingredients before completing installation of the Stacked Blade Assembly.

NOTE: If the Stacked Blade Assembly is not fully seated, you will not be able to install and lock the lid.

NOTE: The Stacked Blade Assembly will fit loosely on the drive gear.

TIP: It’s best to add the liquid ingredients first and then the dry ingredients.

1. Place the motor base on a clean, dry, level surface such as a counter or table top.
2. Align and lower the Pitcher onto the motor base. The handle should be aligned slightly to the right of the “LOCK” symbol on the motor base.
3. Rotate the blender pitcher clockwise until it clicks in place. As the pitcher rotates, it will lower, and the safety tabs on the bottom of the pitcher will slide under the safety tabs on the top of the motor base.
4. The pitcher can be placed on the motor base two ways; the handle can be on the front right corner or the front left corner.
5. Holding the Stacked Blade Assembly by the top of the shaft, place it onto the drive gear inside the pitcher. Ensure that the Stacked Blade Assembly is seated properly and is standing upright.
6. Add the ingredients to the pitcher, making sure that they do not exceed the highest measured marking line on the side of the pitcher.
7. Plug the power cord into the electrical outlet and press the power button .
8. Holding the lid by the handle in the upright position, place it on top of the pitcher, aligning the arrow (▼) located on the lid with the arrow (▲) located on the pitcher’s handle. Press the handle down until you hear a click.
9. Select the speed that best suits your needs.
10. When you have reached your desired consistency, stop the appliance by pressing the same button again or select the power button () and wait for the attachment to stop turning.
11. To remove the lid, press the release button on the lid, pull the lid handle up to a 90° angle, and lift the lid off. Turn the pitcher counterclockwise and then lift off the base.
12. For thicker consistencies, first remove the lid by pressing the release button and pulling the lid handle up to a 90-degree angle to lift the lid off the pitcher. Then, carefully remove the Stacked Blade Assembly from the top of the shaft. Place the Stacked Blade Assembly away from the work area to avoid accidental contact. Finally, empty the contents of the pitcher.
13. Make sure that the unit is unplugged when not in use.
14. To release the motor base from the counter or table top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you.

USING THE NUTRI NINJA® CUP

IMPORTANT: Review all warnings on pages 4–7 before proceeding.

TIP: For best results, use short PULSES. Practice makes perfect.

1. Place the motor base on a clean, dry, level surface such as a counter or table top.
2. Add ingredients to the Nutri Ninja cup.
3. Place the Nutri Ninja Blade Assembly onto the cup and screw it tightly until you have a good seal.
4. Turn the Nutri Ninja cup upside down and place it onto the motor base, aligning the tabs on the cup with the motor base. Turn the Nutri Ninja cup clockwise to lock into place. You will hear a click when the lock is engaged. Turn the power button on, and the single-serve button will illuminate.
5. Press down on the Single Serve button in short intervals to activate.
6. Once you have reached your desired consistency, turn the power button off. Turn the Nutri Ninja cup counterclockwise and pull straight up to remove. NOTE: DO NOT overfill. To avoid spilling, do not add ingredients past the MAX fill line.
7. Turn the cup upright and remove the Nutri Ninja Blade Assembly by twisting the blade assembly counter-clockwise.
8. Do not store blended contents with the Nutri Ninja Blade Assembly attached.
9. Place the To-Go drinking lid onto the Nutri Ninja® cup, twist to seal, and enjoy!
10. Be sure to store the Nutri Ninja Blade Assembly attached to an empty cup when not in use.
11. Make sure that the motor base is unplugged when not in use.
12. To release the motor base from the counter or table top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you.

USING THE FOOD PROCESSOR BOWL

IMPORTANT: Review all warnings on pages 4–7 before proceeding.

IMPORTANT: As a safety feature, the power button () will flash and the motor will not work if the bowl and lid are not installed correctly. When the bowl and lid are installed properly, the power button () will be solid, indicating that the appliance is ready for use.

NOTE: The Chopping and Dough Blade Assemblies will fit loosely on the drive gear.

NOTE: The 64 oz. The bowl is not intended for blending drinks. DO NOT overfill.

NOTE: Please follow the same instructions to install the Dough Blade Assembly.

1. Place the motor base on a clean, dry, level surface such as a counter or table top.
2. Align and lower the bowl onto the motor base. The handles should be aligned slightly to the right of the LOCK symbol on the motor base.
3. Rotate the bowl clockwise to lock into place. You will hear a click when the lock is engaged.
4. The bowl can be placed on the motor base two ways; the handle can be on the front right corner or the front left corner.
5. Holding the desired Blade Assembly by the top of the shaft, place it onto the drive gear inside the bowl. Ensure that the Blade Assembly is seated properly and is standing upright.
6. Add the ingredients to the bowl, making sure that they do not exceed the highest measured marking line on the side of the bowl.
7. Holding the lid by the handle in the upright position, place it on top of the bowl, aligning the arrow (▼) located on the lid with the arrow (▲) located on the bowl’s handle. Press the handle down until you hear a click.NOTE: To add liquids during processing, open the drizzle hole on the top of the lid and pour the liquid slowly into the mixture.
8. Plug the power cord into the electrical outlet and press the power button . Select the speed that best suits your needs. Pulse ingredients for even chopping by pressing down in short intervals.
   NOTE: Please refer to the Speed Settings & Uses chart for suggested uses and speeds.
9. When you have reached your desired consistency, stop the appliance by pressing the power button () and wait for the Chopping Blade Assembly to stop turning.
10. To remove the lid, press the release button on the lid and pull the lid handle up to a 90° angle.
11. Turn the bowl counter-clockwise and lift it to remove it from the motor base.
12. To release the motor base from the counter or table top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you.

SPEED SETTINGS & USES

* When blending sauces and soups, make sure they’re cooled to room temperature first. Ninja® containers are not intended for hot blending.

CARE & MAINTENANCE

CLEANING

Separate all parts. Wash all containers in warm, soapy water with a soft cloth.

Hand-Washing

Wash blade assemblies in warm, soapy water using a dishwashing utensil with a handle to avoid direct contact with the blades. Exercise care when handling blade assemblies, as the blades are sharp. Thoroughly rinse and air-dry all parts.

Dishwasher

All attachments are dishwasher safe. It is recommended that the lids, containers, and blade assemblies be placed on the top rack of the dishwasher ONLY. Ensure the blade assemblies are removed from their containers before placing them in the dishwasher. Exercise care when handling blade assemblies.

Motor Base

Turn off the unit and unplug the motor base before cleaning. Wipe the motor base with a clean, damp cloth.
DO NOT use abrasive cloths, pads, or brushes to clean the base.

STORING

Wrap the power cord around the cord wrap on the back of the motor base. Store the unit upright and store all blade assemblies inside or attached to their respective containers with their lids locked in place.

DO NOT store blended or unblended ingredients in the Single-Serve Cup with the Nutri Ninja® Blade Assembly attached.

DO NOT stack items on top of the containers. Store any remaining attachments alongside the unit or in a cabinet where they will not be damaged or create a hazard.

RESETTING THE MOTOR

This unit features a unique safety system that prevents damage to the motor and drive system should you inadvertently overload it. If the unit is overloaded, the motor will be temporarily disabled.

Should this occur, follow the reset procedure below.

1. Unplug the unit from the electrical outlet.
2. Allow the unit to cool for approximately 15 minutes.
3. Remove the container’s lid and blade assembly. Empty the container and ensure no ingredients are jamming the blade assembly.

IMPORTANT: Ensure that maximum capacities are not exceeded. This is the most typical cause of appliance overload.

If your unit needs servicing, please call Customer Service at 1-877-646-5288. So we may better assist you, please register your product online at registeryourninja.com and have the product on hand when you call.

ORDERING REPLACEMENT PARTS

To order additional parts and attachments, visit ninjaaccessories.com.

TROUBLESHOOTING GUIDE

WARNING: To reduce the risk of shock and unintended operation, turn the power off and unplug the unit before troubleshooting.

Motor Doesn’t Start or Blade Assembly Doesn’t Rotate.

• Make sure the container is securely locked on the motor base.
• Make sure the lid is securely on the container in the correct position (align arrows).
• The appliance is turned “Off”. Press the power button ( ) to turn “On”.
• Check that the plug is securely inserted into the electrical outlet.
• Check the fuse or circuit breaker.
• The unit has overheated or overloaded. Unplug and wait approximately 15 minutes before using again.
• Check to make sure the unit is not overloaded.

Food is Unevenly Chopped.

• Either you are chopping too much food at one time, or the pieces are not of even size, and processing smaller amounts per batch.

Food is Chopped Too Fine or is Too Watery.

• The food has been over-processed. Use the pulse button for controlled processing.

Food Collects On the Lid or On the Sides of the Container.

• The mixture is too thick. Add more liquid.

You cannot Achieve Snow From Solid Ice.

• DO NOT use ice that has been sitting out or has started to melt. Use ice straight from the freezer.
• Start with a few pulses and then go to a continuous blending cycle.

Motor Base won’t stick to the Counter or the tabletop.

• Make sure the surface and suction feet are wiped clean. Suction feet will only stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces such as wood, tile, and non-polished finishes.
• DO NOT attempt to use the appliance when the motor base is stuck to a surface that is not secure (cutting board, platter, plates, etc.).

ONE (1) YEAR LIMITED WARRANTY

The One (1) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.

SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of one (1) year from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in the Owner’s Guide, subject to the following conditions and exclusions:

What is covered by this warranty?

1. The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced up to one (1) year from the original purchase date.
2. In the event a replacement unit is issued, the warranty coverage ends six (6) months following the receipt date of the replacement unit or the remainder of the existing warranty, whichever is later. SharkNinja reserves the right to replace the unit with one of equal or greater value.

What is not covered by this warranty?

1. Normal wear and tear of wearable parts (such as blending vessels, lids, blades, blender bases, etc.), which require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty. Replacement parts are available for purchase at ninjaaccessories.com.
2. Any unit that has been tampered with or used for commercial purposes
3. Damage caused by misuse, abuse, negligent handling, failure to perform required maintenance (e.g., failure to keep the well of the motor base clear of food spills and other debris), or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the repair is performed by a person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.

How to get service

If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit ninjakitchen.com/support for product care and maintenance self-help. Our Customer Service Specialists are also available at 1-877-646-5288 to assist with product support and warranty service options, including the possibility of upgrading to our VIP warranty service options for select product categories. So we may better assist you, please register your product online at registeryourninja.com and have the product on hand when you call.

SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of $20.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit.

How to initiate a warranty claim

You must call 1-877-646-5288 to initiate a warranty claim. You will need the receipt as proof of purchase. We also ask that you register your product online at registeryourninja.com and have the product on hand when you call, so we may better assist you. A Customer Service Specialist will provide you with return and packing instructions.

How state law applies

This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

For more manuals by Ninja, visit ManualsLibraryy

Ninja BL770 Series Mega Kitchen System- FAQs