Ninja XSK770 Professional Prep System User Guide

Ninja XSK770 Professional Prep System

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

1. To protect against electrical shock, do not submerge the appliance or allow the power cord to come into contact with water or any other liquid.
2. DO NOT allow young children to operate the appliance or use it as a toy. Close supervision is necessary when any appliance is used by or near children.
3. Never leave an appliance unattended when in use.
4. Turn the appliance off and remove the power cord from the electrical outlet when not in use, before assembling or disassembling parts, and before cleaning. To unplug, grasp the plug and pull it from the electrical outlet. Never pull from the power cord.
5. DO NOT abuse the power cord. Never carry the appliance by the power cord or yank it to disconnect from the electrical outlet; instead, grasp the plug and pull to disconnect.
6. DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions, has been dropped, or damaged in any manner. This appliance has no serviceable parts. Return the appliance to EURO-PRO Operating LLC for examination, repair, or adjustment.
7. DO NOT let the power cord hang over the edge of the table or counter or touch hot surfaces such as the stove.
8. Always use the appliance on a dry, level surface.
9. Keep hands, hair, clothing, as well as utensils, out of the container while processing to reduce the risk of severe injury to persons or damage to the appliance. A scraper may be used, but only when the appliance is not running.
10. CAUTION: Blade assembly is sharp; handle with care. When handling the blade assembly, always hold it by the shaft.
11. Avoid contact with moving parts.
12. DO NOT attempt to sharpen blades.
13. DO NOT use the appliance if the blade assembly is bent or damaged.
14. To reduce the risk of injury, never place the blade assembly on the base without a pitcher or bowl properly attached.
15. DO NOT operate this appliance on or near any hot surfaces (such as gas or electric burners or in a heated oven).
16. The use of attachments or accessories, including canning jars, not recommended by the manufacturer, may result in fire, electric shock, or personal injury.
17. DO NOT remove the container from the motor base while the appliance is in operation.
18. To reduce the risk of injury, NEVER operate the appliance without the lid in place; DO NOT try to defeat the interlock mechanism; make sure that the attachment is properly installed before operating the appliance.
19. DO NOT expose containers to extreme temperature changes.
20. CAUTION: DO NOT BLEND HOT LIQUIDS.

Getting To Know Your Ninja® Mega Kitchen System

• a To-Go Single Serve Lid (x2)
• b Bowl Lid with Locking Handle
• c Pitcher Lid with Locking Handle
• d 4-Blade Assembly (bowl)
• e Single Serve Drink Cup (x2)
• f Dough Blade (bowl)
• g 6-Blade Assembly (pitcher)
• h 64 oz. Bowl
• I 72 oz. Pitcher
• j Gear Shaft
• k Single Serve Blade
• l Motor Base
• m Power Cord (not shown)

NOTE: Attachments are not interchangeable.

The Ninja® Mega Kitchen System is a professional, high-powered powered innovative tool with a sleek design and outstanding performance, a true asset to any kitchen. It is perfect for ice crushing, blending, food processing, and complete juicing. The Ninja® Mega Kitchen System also features a unique capability to knead dough for pizzas, breads, pretzels, and cookies! Create all of your favorite recipes fast and easy with just one touch of a button. For best results, be sure to carefully read all the instructions contained in the manual before using this appliance.

FEATURES

• Patented Ninja® Technology
• Extra Large, 72 oz. Pitcher – BPA Free
• 64 oz. Bowl – BPA Free
• Single Serve Drink Cup – BPA Free
• Lock–In Lid, Featuring Pour Spout
• Easy to Clean Electronic Control Panel
• Sturdy, Non-Slip Base
• Hidden Drain Holes – prevent water buildup from the dishwasher

Using the Ninja® Mega Kitchen System

PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE APPLIANCE

IMPORTANT: Never add ingredients into the container before placing the attachment first.

IMPORTANT: Attachments are not interchangeable.

CAUTION: Blades are sharp! Use extreme caution when handling the blade assemblies. Always hold them by the shaft.

IMPORTANT: DO NOT attempt to operate the appliance without the lid on.

IMPORTANT: Never run the appliance empty.

CAUTION: Use extreme caution when processing hot foods to avoid accidental scalding or burns. Do not process food that is hotter than 180°F/82°C. Allow very hot ingredients to cool before processing.

WARNING: Secure the appliance while in use by pressing down on the lid with one hand.

CAUTION: Never remove the container while the appliance is still running.

WARNING: Never leave the appliance unattended while in use.

BEFORE FIRST USE

1. Remove all packaging material and labels from the appliance.
2. Wash the lids, pitcher, bowl, single-serve cups, and attachments in warm, soapy water with a soft cloth. Use caution when washing the blade assemblies, as the blades are very sharp.
3. Rinse and dry thoroughly.
4. The pitcher, bowl, single-serve cups, lids, and attachment are all dishwasher safe. It is recommended that the lids and attachments be placed on the top rack. Ensure that the attachments are removed from the containers before placing them in the dishwasher.
5. Wipe the motor base clean with a damp cloth.

Assembly and Use for the 72 oz. Pitcher

Assembly

IMPORTANT: Make sure that the motor base is plugged in for use.

1. Place the motor base on a clean, dry, level surface such as a counter or table top.
2. Align and lower the Pitcher onto the motor base. (Fig. 1) The handle should be aligned slightly to the right of the “LOCK” symbol on the motor base.
3. Rotate the pitcher clockwise as far as it will go to lock in place. (Fig. 2)
4. The pitcher can be placed on the motor base two ways; the handle can be on the front right corner or the front left corner. (Fig. 3a, Fig. 3b)
5. Holding the 6-Blade Assembly by the top of the shaft, place it onto the drive gear inside the pitcher. Ensure that the attachment is seated properly and is standing upright. (Fig. 4)
   NOTE: The blade will fit loosely on the drive gear.
6. Add the ingredients to the pitcher, making sure that they do not exceed the highest measured marking line on the side of the pitcher.
   NOTE: If you need to add additional ingredients while the appliance is processing, open the pour spout cap and pour the ingredients in through the opening.
7. Plug the power cord into the electrical outlet and press the power button .
   NOTE: As a safety feature, the power button () will flash and the motor will not work if the pitcher and lid are not installed correctly. When the pitcher and lid are installed properly, the power button () will be solid, indicating that the appliance is ready for use.
8. Holding the lid by the handle in the upright position, place it on top of the pitcher, aligning the arrow (▼) located on the lid with the arrow (▲) located on the pitcher’s handle. (Fig. 5) Press the handle down until you hear a click. WARNING: Never leave the appliance unattended while in use.
9. Select the speed that best suits your needs. (Fig. 6)
   NOTE: Pulse ingredients for even chopping by pressing down in short intervals.
10. When you have reached your desired consistency, stop the appliance by pressing the power button ( ) and wait for the attachment to stop turning. (Fig. 7)
11. To remove the lid, press the release button on the lid, pull the lid handle up to a 90° angle, and lift the lid off. Turn the pitch counterclockwise and then lift off the base. (Fig. 7, Fig. 8)
     CAUTION: Never insert your hands in the pitcher as the blades are sharp. Always use a spatula to dislodge food that has stuck to the sides of the pitcher.
12. Depending on the consistency of the contents in the container, open the pour spout cap and use the spout to empty the liquid contents. For thicker consistencies, remove the lid and attachment carefully (by its shaft), then empty the contents from the container.
13. Make sure that the unit is unplugged when not in use.

Assembly and Use for the Single-Serve Cup

WARNING: Never leave the appliance unattended while in use.

TIP: For best results, use short “PULSES”… Practice makes perfect!!

 IMPORTANT: Make sure that the motor base is plugged in for use.

1. Place the motor base on a clean, dry, level surface such as a counter or table top.
2. Add ingredients to the single-serve cup.
3. Place the single-serve blade onto the cup and screw it tightly until you have a good seal. (Fig. 1)
4. Turn the single-serve cup upside down and place it onto the motor base, aligning the tabs on the cup with the motor base. Turn the single-serve cup clockwise. (Fig. 2) Turn the power button on, and the single-serve button will illuminate.
5. Press down on the Single Serve button in short intervals to activate. (Fig. 3).
6. Once you have reached your desired consistency, turn the power button off. Turn the single-serve cup counterclockwise and pull straight up to remove. (Fig. 4) (Fig. 5)
   NOTE: Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line.
7. Turn the cup upright and remove the single-serve blade by twisting the blade assembly clockwise.
8. Place the To-Go drinking lid onto the single-serve drink cup, twist to seal, and enjoy!
9. Make sure that the motor base is unplugged when not in use.
   NOTE: To order additional Single Serve Cups, please visit our website: www.ninjakitchen.com or feel free to contact customer service: 1-877-646-5288.

Assembly and Use for the 64 oz. Bowl

 WARNING: Never leave the appliance unattended while in use.

ASSEMBLY

 IMPORTANT: Make sure that the motor base is plugged in for use.

1. Place the motor base on a clean, dry, level surface such as a counter or table top.
2. Align and lower the Bowl onto the motor base. (Fig. 1)The handle should be aligned slightly to the right of the “LOCK” symbol on the motor base.
3. Rotate the bowl clockwise as far as it will go to lock in place. (Fig. 2)
4. The bowl can be placed on the motor base two ways; the handle can be on the front right corner or the front left corner. (Fig. 3a, Fig. 3b)
5. Holding the desired blade by the top of the shaft, place it onto the drive gear inside the bowl. Ensure that the attachment is seated properly and is standing upright. (Fig. 4)
   NOTE: The blade will fit loosely on the drive gear.
6. Add the ingredients to the bowl, making sure that they do not exceed the highest measured marking line on the side of the bowl.
7. Plug the power cord into the electrical outlet and press the power button .
   NOTE: As a safety feature, the power button () will flash and the motor will not work if the bowl and lid are not installed correctly. When the bowl and lid are installed properly, the power button () will be solid, indicating that the appliance is ready for use.
8. Holding the lid by the handle in the upright position, place it on top of the bowl, aligning the arrow (▼) located on the lid with the arrow (▲) located on the bowl’s handle. (Fig. 5) Press the handle down until you hear a click.
   NOTE: The 64 oz. The bowl is not intended for blending drinks. Do not overfill.

USING THE 4-BLADE ASSEMBLY

1. Holding the 4-Blade assembly by the shaft, place it onto the gear shaft inside the bowl. Ensure that the attachment fits around the gear shaft and that it is standing straight.
2. Add the ingredients and secure the bowl lid onto the bowl. (Fig. 1)
3. Plug the power cord into the electrical outlet and press the power button .
4. Select the speed that best suits your needs. Pulse ingredients for even chopping by pressing down in short intervals.
   NOTE: Please refer to the “Speed Settings & Uses” chart for suggested uses and speeds.
5. When you have reached your desired consistency, stop the appliance by pressing the power button () and wait for the blade to stop turning.
6. To remove the lid, pull the lid handle up to a 90° angle and lift the lid off. Turn the bowl counterclockwise and then lift off the base. (Fig. 2, Fig. 3)

USING THE DOUGH BLADE

 IMPORTANT: Use only the “DOUGH” button when using this attachment.
 IMPORTANT: Use the suction lever when using the dough blade on SPEED 1/DOUGH.

1. Place the motor base on a clean, dry, level surface such as a counter or table top. (Fig. 4) Push the suction lever on the side of the motor base down to secure the suction feet to the surface. (Fig. 4a) If the suction feet have not totally adhered to the surface, press down lightly on the base to give the suction feet a better grip.
2. Secure the bowl onto the motor base.
3. Holding the dough blade by the shaft, place it onto the gear shaft inside the bowl. Ensure that the attachment fits around the gear shaft and that it is standing straight.
4. Add the ingredients and secure the bowl lid onto the bowl.
   NOTE: For best results, add wet ingredients first and then add dry ingredients.
5. Plug the power cord into the electrical outlet and press the power button .
6. Once finished making dough, remove the bowl from the motor base. (Fig. 2, Fig. 3)
7. To release the motor base from the counter or table top, pull the suction lever up to release the suction feet. (Fig. 4b)
   NOTE: The suction lever activates the suction feet for added stability.

Speed Setting & Uses

 IMPORTANT: Use the suction lever when using the dough blade on SPEED 1/DOUGH.

Care & Maintenance

HOW TO CLEAN

CAUTION: Make sure that the motor base is unplugged from the power source before inserting or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base in water or any other liquid.

1. Separate/remove all parts from each other.
2. Clean the motor base with a damp cloth and wipe dry.
3. Place the pitcher, single-serve cup, and bowl in the dishwasher. Place the lids and attachments on the top rack. Use caution when handling the blade assemblies, as the blades are very sharp.
   NOTE: You may also wash the containers by filling ¾ of the container with warm water and a drop dof ishwashing detergent, placing the corresponding lid on the container, and pressing the pulse button a few times. Once clean, remove the container from the motor base. Rinse the container, attachment, and lid under running water. Allow all the parts to dry before storing.
   Please call customer service if any servicing needs to be performed on the appliance at 1-877-646-5288.

HOW TO STORE

1. Store the Ninja® Mega Kitchen System upright with the pitcher on the motor base, 6-Blade assembly inside the pitcher, er and lid on the pitcher. Do not place anything on top. Store the bowl with the 4-Blade assembly inside and the top lid. Store the single-serve cup and the rest of the attachments alongside the appliance or in a cabinet where they will not be damaged and won’t cause a hazard.

RESETTING THE MOTOR THERMOSTAT

The Ninja® Mega Kitchen System features a unique safety system that prevents damage to the unit’s motor and drive system should you inadvertently overload your appliance. If the appliance is being overloaded, the motor will stop and the power light will remain lit, nd speeds 1, 2, and 3 will flash. To reset the appliance, follow the resetting procedure below:

1. Unplug the appliance from the electrical outlet.
2. Remove and empty the container and ensure that no food is jamming the cutting blades or attachments.
3. Allow the appliance to cool for approximately 15 minutes.
4. Reinstall the container onto the base and re-plug the appliance into the electrical outlet.
5. Proceed to use the appliance as before, making sure not to exceed the recommended maximum capacities.

Troubleshooting Guide

Replacement Parts

ORDERING REPLACEMENT PARTS

To order additional parts and attachments, please visit our website: www.ninjakitchen.com or feel free to contact customer service: 1-877-646-5288.

Recipes

Sweet Strawberry Smoothie

Ingredients

• 1/2 Cup Half-and-Half Cream
• 1/2 Cup Whole Milk
• 1 Cup Ripe, Sweet Strawberries, stemmed and washed
• 1/2 Cup Lowfat Vanilla-Flavored Yogurt
• 2 Cups Ice Cubes

Directions

Pour the milk and cream into the pitcher and add the strawberries, yogurt, and ice cubes. Blend on 3 until the mixture is very smooth and no fruit pieces remain. Pour into glasses and serve right away. Serves 2 to 3.

Pitcher
6-Blade Assembly
Pitcher Lid

Middle Eastern Tabouli

Ingredients

• 1 Cup Plain Bulgur (cracked wheat), uncooked
• 1 Cup Water
• 1 Bunch Fresh Parsley, stemmed
• 6 Sprigs Fresh Mint, stemmed
• 1/2 Small White Onion, peeled
• 2 Cloves of Garlic, peeled
• 1/3 Cup Extra Virgin Olive Oil
• 2 Lemons, juiced (about 1/4 cup)
• 1/2 tsp. Salt
• 1/2 tsp. Freshly Ground Black Pepper
• 2 Ripe Tomatoes, cored and diced
• 3 Green Onions, cleaned and chopped

Directions

In a large bowl, mix the bulgur with the water. Cover and let stand for 20 minutes, until the water is absorbed and the wheat is tender.

Place the parsley, mint, onion, and garlic into the bowl and pulse on 1 to make a small, rough chop, cleaning the sides of the bowl with a spatula as necessary. Transfer the mixture to the bowl of softened bulgur. Place the olive oil, lemon juice, salt, and pepper in the bowl and blend on 2 until incorporated. Add the dressing to the bulgur mixture and lightly toss to mix. Add the chopped tomatoes and green onion, again tossing gently to mix. Taste and adjust the seasonings. Serve well-chilled or at room temperature. Serves 6.

Bowl
4-Blade Assembly
Bowl Lid

English Toffee Cookies

Ingredients

• 1 Cup Butter, softened
• 1/2 Cup Dark Brown Sugar, packed
• 1/2 Cup Sugar
• 1 tsp. Vanilla Extract
• 1 Egg Yolk
• 2 Cups Cake Flour
• Pinch Salt
• 10 oz. Milk Chocolate Candy Bar, melted
• 1/2 Cup Almonds, chopped

Directions

Place the softened butter, sugars, extract, act, and egg yolk in the bowl and blend on 1 until smooth and creamy. Use a spatula to clean the sides of the bowl. Add the flour and salt. Blend again until smooth. Spoon the cookie dough onto a baking sheet that has been coated with cooking spray. Allow a 2-inch margin, as the dough will spread.

Lightly spread the chocolate over the dough and sprinkle the nuts over all. Bake at 350° for 15 to 20 minutes. Cool slightly and cut into small squares. Cool on a wire rack.

Makes about 24 cookies.

Bowl
Dough Blade
Bowl Lid

Roasted Tomato & Olive Bruschetta

Ingredients

• 4 Medium Tomatoes, cored and quartered
• 2 Tbsp. Extra-Virgin Olive Oil
• 1 Clove Garlic, peeled
• 1/4 Cup Black Olives, pitted
• 1 tsp. Fresh Basil
• Fresh Bread Rounds, lightly toasted

Directions

Place the tomatoes on a baking sheet and toss with the oil. Sprinkle with salt and pepper. Bake at 350°F for 30 to 40 minutes, or until very soft and tender. Remove and cool slightly. Place the cooled tomatoes in the bowl and add the garlic, olive oil, and basil. Add a few drops of oil if the mixture looks dry. Pulse on 1 for just a few seconds, or long enough to roughly chop the vegetables together. Don’t over-blend.

Spoon the bruschetta on the bread rounds and serve. Makes about 12 servings.

Bowl
4-Blade Assembly
Bowl Lid

ONE (1) YEAR LIMITED WARRANTY

EURO-PRO Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1) year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions, and exceptions.

The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling, or damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by or resulting from damage from shipping or repairs, service, or alteration to the product or any of its parts, which have been performed by a repair person not authorized by EURO-PRO Operating LLC.

If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid. For assistance with warranty service options or customer support, please call our customer care and product specialists at 1 (800) 798-7398 or visit our website www.sharkclean.com.

If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC will repair or replace it free of charge. Proof of purchase is required, and a fee of $19.95 will apply to cover the cost of return freight. *

This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied, ed, and/ or conventional warranties. The responsibility of EURO-PRO Operating LLC, if any, is limited to the specific obligations expressly assumed by it under the terms of this Limited Warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from province to province.

*IMPORTANT: Carefully pack the item to avoid damage during shipping. Be sure to include proof of purchase date and attach the tag to the item before packing with your name, complete address, and phone number, with a note giving purchase information, model number, and what you believe is the problem with the item. We recommend that you insure the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. We are constantly striving to improve our products; therefore, the specifications contained herein are subject to change without notice.

Product Registration

Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja® product within ten (10) days of purchase. You will be asked to provide the store name, date of purchase, and model number, along with your name and address.

The registration will enable us to contact you in the unlikely event of a product safety notification. By registering, you acknowledge having read and understood the instructions for use nd warnings as outlined in the accompanying instructions.

For more manuals by Ninja, visit ManualsLibraryy

Ninja XSK770 Professional Prep System- FAQs