Tigerking PFSD66 Fireproof Safe Box
STRUCTURE
NOTICE: Different modes have different numbers of shelves.
WARNING
- Please do not move the safe while the door is open.
- Please close the door before moving the safe.
- Tigerking Safe recommends that you do not store loaded guns in this unit.
- If you experience any problems or challenges with your safe, please feel free to contact us for a quick response. Many issues can be resolved promptly without the product needing to be returned.
- Our customer support team is always available to answer any questions and help resolve all concerns you may have.
Email: [email protected]
Facebook: @TIGERKINGSAFES
Messenger: m.me/TIGERKINGSAFES
Go to our web: www.tigerkingsafe-us.com and click chat with us to have a live conversation.
FIRST OPENING
- STEP 1: Locate the 2 emergency keys (the black key) in the same bag as the instruction booklet.
- STEP 2: Locate the emergency keyhole by pushing the left side of the emergency lock cover.
- STEP 3: Align the emergency key with the keyhole and fully insert it, turn the key counterclockwise to the limit, and hold it.
- STEP 4: At the same time, rotate the knob clockwise to open the safe.
NOTICE:
- When you rotate the knob clockwise, you must have the key fully inserted and turned counterclockwise to the limit, keeping the key until the safe unlocks and opens.
- Please keep the keys in a secure place. Do not lock the keys inside the safe.
INSTALL BATTERIES
- STEP 1: After first opening, keep the safe open and locate the battery compartment on the hinge.
- STEP 2: Prepare 4 brand-new AA batteries (not included) and insert them into the battery compartment by matching the + and – electrodes.
NOTICE:
- Please use brand-new batteries. Do not mix used batteries with new batteries.
- Replace the batteries when the red indicator light turns on; it means the batteries are running out of power.
SET UP THE CODE
The default code is “159”. The safe can be set with two codes.
SET UP FIRST CODE
- STEP 1: Open the safe, keep the safe open.
- STEP 2: Press the reset button (a red button on the hinge side of the door). The safe beeps twice; meanwhile, the blue indicator light flashes twice, then stays lit.
- STEP 3: Input a new code, 3–8 digits, and press #. The new code will be confirmed by two beeps, and the blue indicator light will flash twice, then turn off.
- STEP 4: Test the code before you close the door.
SET UP SECOND CODE
- STEP 1: Open the safe, keep the safe open.
- STEP 2: Press “0” twice and then press the reset button (a red button on the hinge side of the door). The safe beeps three times; meanwhile, the blue indicator light flashes three times, then stays lit.
- STEP 3: Input a new code, 3–8 digits, and press #. The new code will be confirmed by two beeps, and the blue indicator light will flash twice, then turn off.
- STEP 4: Test the code before you close the door.
NOTICE:
- Ten seconds without any operation after pressing the reset button will make it go back to standby mode. You need to retry from STEP 1.
- Please set up both codes immediately after receiving the safe.
OPEN THE DOOR
This safe can be unlocked in the following two ways:
FIRST WAY:
Open the safe with a key. Please refer to the step “FIRST OPENING.”
SECOND WAY:
Open the safe with a code.
- STEP 1: Enter your owner code. Each press results in one buzzer beep and a blue light flash.
- STEP 2: Press the # button to confirm. If the code is correct, the blue light will flash twice and the buzzer will beep twice. Then the green light will turn on for 6 seconds, and the inner LED light will turn on for 30 seconds. If the code is incorrect, the blue light will flash three times and the safe will beep three times.
- STEP 3: Turn the knob clockwise to open the safe after you enter the correct code and while the green light is on.
NOTICE:
- When you press the wrong digit, press “*” to remove all digits inputted, then re-enter the code.
- The inner LED light will only turn on when you use the second way to open the safe.
- The default code is “159#”.
CLOSE THE SAFE
Close the door and rotate the knob counterclockwise.
DUAL ALARM SYSTEM
- Continuously inputting the wrong code three times will make the safe automatically lock for about 20 seconds, and the buzzer will go off. Any action at the keypad is invalid.
- Continuously entering the wrong code three times after the first alarm will make the safe automatically lock for about 5 minutes, and the alarm will go off for the second time. Any action at the keypad is invalid during that time.
- The beeps can be stopped by:
- Step 1: Use the key to open the safe.
- Step 2: Remove the battery to cut off the power.
SILENCE MODE
Sound Off
Press “00” and then press “*” to confirm. The sound will turn off, and there will be no beep during operation.
Sound On
Press “66” and then press “*” to confirm. The sound will turn on, and the beep and sound will be restored.
NOTICE:
After a power cut, the sound will turn on.
CUSTOMER SUPPORT & WARRANTY
Where can I find the instruction video?
To see the tutorial video:
- Go to our Facebook: @TIGERKINGSAFES
- Go to our YouTube channel: https://www.youtube.com/@tigerkingsafe
- Contact us to get the videos (24/7): Messenger: m.me/TIGERKINGSAFES Email: [email protected], Go to our web www.tigerkingsafe-us.com and click chat with us to have a live conversation.
What should I do if I lose the keys?
If you lose the emergency key. Check the numbers on the emergency key or the number in the emergency keyhole.
Customer Support / Warranty
The possible problems you might encounter:
- Cargo damaged
- Missing accessories
- Unsatisfied with the safe
- Any other setting problem
We encourage you to contact us (24/7):
Messenger: m.me/TIGERKINGSAFES
Email: [email protected]
We offer a 1-year warranty for our clients, and we shall find a solution for you. For details, please refer to our warranty card or contact us at [email protected]. Thank you for your time to read.
For More Manuals By Tigerking, Visit ManualsLibraryy.