CARVIN 1588 3-Way Passive Speakers
SPS™ POWERED SPEAKER FEATURES
Carvin’s SPS™ SMART POWERED SPEAKERS™ are more than just another “power amp in a cabinet.” They offer advanced electronics to perfectly control every speaker component. Woofers are power-managed through active filtering, allowing more low-end punch and preventing over-excursion. Midrange drivers reproduce exceptional detail without harshness, and the top-end is crystal clear. The exclusive optoisolator limiter helps keep your peaks under control, reducing distortion. Surprising transparency is delivered by pure, uncolored power from ultra-fast slew rate power amps.
The heart of every Carvin SPS™ powered speaker is our exclusive Digital Powered Processing Amplifier (DPPA™), which is fundamentally a very sophisticated delta-sigma V/A converter. The amplifier’s THD is less than .1% from 20–20k Hz. The 1588P SPS™ offers 600 watts direct to the drivers with no cable loss. SPS™ powered speakers have an incredible 91% efficiency, allowing you to run more powered speakers from the same 15 or 20-amp AC circuit. They run cool because power is not wasted in the heat sink.
This also means you can expect full output 24 hours continuously—not reduced as with other systems when they get hot. Of course, mute and protection circuits are standard to save your gear from any unfriendly stage conditions. The biggest advantage of Carvin powered speakers is rock-solid reliability and convenience, while only adding 6 lbs over the weight of our standard enclosures!
SMART POWERED SPEAKERS™ are easy to connect via 1/4” or XLR balanced inputs. Daisy-chain as many powered speakers as you need for additional coverage. A 12 dB gain switch matches every audio source. A removable AC cord frees the enclosure when transporting.
INPUT
For any distance over 25’, use a balanced source. Use the balanced XLR or 1/4” connectors featured on the rear connect plate. You may daisy-chain as many speakers as you wish. All connectors are wired in parallel.
12 dB PAD
To start the initial hookup, be sure the 12 dB pad switch is in the “IN” position. This will be the least sensitive position for your input source. If your signal is weak, depress the pad switch to the “OUT” position, which will raise the level of your powered speaker.
SOFT LIMITING
Unlike other limiters, the SPS™ incorporates an exclusive optoisolator limiter system, which does not add distortion when limiting. Soft limiting starts to occur when you approach the maximum output of your powered speaker, allowing you to get more usable power out of your system without severe clipping. However, when you hear distortion, hard clipping, or cutting out, reduce the overall level as you have exceeded the system’s capacity.
POWER/PROTECT
When the system has been activated by the power switch, the LED will indicate GREEN. If the system should go into protect, the LED will indicate YELLOW, which may occur if:
- one of the internal driver shorts, or
- if the power amp should require service.
AC POWER
The 1588P is available in either 120V or 240V models. Always use dedicated circuits for powered speakers. Every Carvin SPS™ powered speaker is designed to be left on continuously in the case of permanent installations.
REAR POWERED CONNECT PLATE
SPS™ 1588P POWERED AMP SPECS
- Frequency Response: 20 Hz to 20 kHz ±1 dB
- THD: less than .1%
- Power: 600 watts @ 4Ω
- Duty Cycle: Continuous without power reduction circuits
- Sensitivity: .75 VAC for full output, 12 dB pad
- Input/Through: XLR & 1/4″ Balanced
- Input Impedance: 10k Ω (for 100 to 600 Ω inputs)
- Input Common Mode Rejection: 72 dB @ 1k kHz
- Overload Protection: Yes
- AC Power Muting: Yes
- Power Supply: Toroid Design
- Power Amp Design: High Slew Rate Digital DDPA™
- Power Amp Efficiency: 91%
- AC Voltage, VA: 120 or 240 VAC models, 800 VA
- Idle VA: 15 VA
- AC Connection: 3-prong connector (grounded)
- AC Power Cable: 16 Ga (heavier for long runs)
- Weight: 131 lbs.
CARVIN ENGINEERING DATA
Congratulations on your selection of the 1588 loudspeaker. As the big brother of the 3-way 1584, the 1588 loudspeaker benefits from the same state-of-the-art design and response characteristics, but with one obvious difference—it is twice the size, with twice the components. This translates into an obvious benefit—much more sound output and power with the same extraordinary response as the smaller version. In fact, there isn’t any application that this 800-watt 3-way system can’t handle, tackling anything from large clubs to outdoor concerts. Like the smaller 1584, the 1588 gives you what other 3-way loudspeakers don’t—studio-quality sound in large sound reinforcement applications.
The low-frequency subsystem of the 1588 utilizes two heavy-duty 15” woofers, chosen for their extended bass response at high levels. The midrange employs two 8” direct radiating midrange drivers for their exceptionally smooth and extended frequency response. The high frequency consists of one highly accurate titanium horn driver and lens assembly. All components are integrated with our 3-way C1588 crossover to deliver a system response that is smooth from 34 Hz to 19k kHz. Bi-amping can easily be done by selecting the bi-amp switch and input connectors.
RECEIVING INSPECTION
Inspect your speaker for any damage that may have occurred during shipping. If any damage is found, please notify the shipping company and Carvin. Save the carton and all packing materials. In the event you have to re-ship your unit, always use the original carton and packing material. This will provide the best possible protection during shipment. Carvin and the shipping company are not liable for any damage caused by improper packing.
Save your invoice. It will be required for warranty service if needed in the future. Shipment shortage: If you find items missing, they may have been shipped separately. Please allow several days for the rest of your order to arrive before inquiring. Record the serial number on the enclosed warranty card. Keep your portion of the card and return the portion with your name and comments to us.
WARRANTY
Parts and labor are covered for 1 year on manufacturer’s defects. Warranty does not cover burned-out drivers caused by excessive power or distortion, or physical damage caused by general use, moisture, or dust. CAUTION: Distortion from power amps can destroy drivers much faster than clean power. Contact Carvin’s Customer Service at 800-854-2235 or [email protected]. Customer is responsible for shipping charges.
TYPICAL LOUDSPEAKER IMPEDANCE CONFIGURATIONS
Individual speaker or speaker cabinet wiring examples for total impedance.
REAR CONNECT PLATE
Two standard 1/4” phone jacks and two Twist Lok™ connectors are featured. See hookup diagrams for full-range and bi-amp options.
NORMAL FULL RANGE HOOKUP
SPEAKER CABLES
Use either 1/4” 16-gauge copper wire speaker cable or high-current Twist-Lok™ cables with heavy 4-conductor 12-gauge copper wire. The Carvin PH50 is adequate for lengths up to 50’ under normal use. You can daisy-chain up to one additional speaker per cable by using the OUTPUT connector. Be sure to note the total impedance to the amp so it is not lower than its recommended impedance. See Typical Loudspeaker Impedance Configurations.
SUGGESTIONS FOR OPTIMAL PERFORMANCE
Raise the enclosure to the ear level of your audience for greater coverage. To help control feedback, keep the speakers in front of the microphone. Never direct the microphone towards the speaker. Use a graphic EQ for further feedback control. For greater coverage, add a second speaker system 20° to 30° off-axis.
MODEL 1588 SPEAKER SYSTEM SPECS:
- Frequency Response: 45 Hz to 19 kHz ±3 dB
- Useable Low Frequency: 34 Hz (- -10 dB)
- Power Handling: 800w Continuous Power
- Recommended Amp: 100 to 1200 watts
- Sensitivity: 103 dB SPL, 1 Watt @ 1 meter
- Coverage Angles: 90° Horizontal, 45° Vertical
- Nominal Impedance: 4Ω
- Crossover Type: C1588 Constant Voltage
- Inputs/Outputs: Two 1/4″, two Twist-Lok™
- Bi-Amp Support: Yes—Panel Switch
- Horn Driver Protection: Yes–Relay Dimming
- Woofer Enclosure Type: Vented Box
- Enclosure Covering: Black Duratuff II™
- Dimensions/Weight: 25″W x 19.25″D x 48.5″H, 124 lbs.
- Optional Cables: PH50, SPK25, SPK50, SPK100
- Optional Vinyl Cover: CVS1588
12340 World Trade Drive, San Diego, CA 92128
(800) 854-2235
www.carvin.com
For More Manuals By Carvin Audio, Visit ManualsLibraryy.
CARVIN 1588 3-Way Passive Speakers-FAQs
What are CARVIN 1588 speakers used for?
They are 3-way passive speakers designed to deliver clear sound for home, studio, or stage audio setups.
How do I connect the CARVIN 1588 speakers?
Use a compatible amplifier or receiver. Connect the speaker wires to the amplifier’s terminals, ensuring the positive (+) and negative (–) wires match.
Do I need a separate amplifier for these speakers?
Yes, the CARVIN 1588 are passive speakers, so they require an external amplifier to work.
How should I position the speakers for the best sound?
Place them at ear level, slightly angled toward the listening area, and avoid placing them too close to walls to reduce distortion.
Can I use these speakers outdoors?
They are designed for indoor use. Using them outdoors may reduce performance and can damage the speakers.
How do I maintain the CARVIN 1588 speakers?
Keep them clean and dust-free, avoid exposing them to moisture, and check speaker wires regularly for secure connections.
What is the recommended amplifier power for these speakers?
Use an amplifier with matching or slightly lower wattage than the speaker’s rated power to avoid damaging the drivers.
Why is there no sound coming from my CARVIN 1588 speakers?
Check the amplifier connection, speaker wires, and volume settings. Make sure the amplifier is powered on and the wiring is correct.