Bontrager Trip 100 Cycling Computer
Safety
When riding your bicycle, do not stare at the computer for a long time. If you do not watch the road, you could hit an obstacle, which might cause you to lose control and fall.
Mount Computer
ø 31.8 mm
ø 22.2 mm–27.2 mm
Mount Sensor
Understanding the Instructions
The numbers indicate the order in which to push the buttons. More than one arrow means you should push the button until you see the value you want.
Setup Mode
Ride Mode
- Wake the computer: push any button or spin the wheel.
- YES (starts a new ride and erases trip memory)
- NO (leaves trip memory intact, so the computer records it as a continuing ride).
Additional
For More Manuals By Bontrager, Visit ManualsLibraryy.
Bontrager Trip 100 Cycling Computer-FAQs
What is the Bontrager Trip 100 Cycling Computer used for?
The Bontrager Trip 100 is a basic cycling computer designed to track essential ride data such as speed, distance, ride time, and total mileage.
Why should I use a cycling computer instead of my phone?
Cycling computers are more weather-resistant, lighter, and have much longer battery life than smartphones. They are also easier to read while riding and less expensive to replace if damaged.
Does the Bontrager Trip 100 use GPS?
No, the Trip 100 is a wheel-sensor-based computer, meaning it calculates speed and distance from wheel rotations, which can be very accurate once set up correctly.
How accurate is the Bontrager Trip 100?
Accuracy is high when the correct wheel size is entered and the magnet and sensor are properly aligned. Small variations may occur but are normal for non-GPS computers.
How do I reset the Bontrager Trip 100 cycling computer?
To reset the computer, press and hold the reset or mode button until the screen clears. This will erase trip data and return settings to default.
What happens when I reset the Trip 100?
A reset clears all ride data, including trip distance and time. The odometer may also reset, so it’s best to note your total mileage before performing a reset.
Why is my Bontrager Trip 100 not working?
The most common causes are a low battery, misaligned sensor and magnet, or loose mounting. Checking these usually resolves the issue.
How do I fix speed or distance not showing correctly?
Make sure the wheel magnet passes closely by the sensor, the battery is fresh, and the wheel size setting matches your tire size.
Is the Bontrager Trip 100 waterproof?
It is weather-resistant, meaning it can handle rain and splashes, but it should not be submerged in water.
Can I connect the Bontrager Trip 100 to apps like Strava?
No, this model does not support Bluetooth or wireless syncing. Ride data must be tracked manually if you want to log it in apps.