Chantal Oslo Cordless Electric Kettle User Guide

Chantal Oslo Cordless Electric Kettle

FOR HOUSEHOLD USE ONLY!

IMPORTANT SAFEGUARDS.

When using electrical appliances, basic safety precautions should always be followed, including the following: See parts diagram.

1. Please read all Instructions before use.
2. DO NOT place the kettle on the stovetop!
3. The electric kettle must be operated on a flat surface. DO NOT place on or near a gas or electric stove top, or near a heated oven, or on the top of other electric appliances.
4. Always seat the appliance onto the power base first, then plug the cord into the wall outlet. To disconnect, turn the switch off, then remove the plug from the wall outlet.
5. Do not fill the kettle when positioned on the base. Dry the water on the exterior bottom of the body before placing it onto the power base.
6. DO NOT touch hot surfaces. Boiling will make the body, spout, and lid too hot to touch. Pick up the kettle by the handle only.
7. DO NOT leave the appliance unattended when in use. Close supervision is necessary when any appliance is used by or near children.
8. Be aware of steam being emitted from the spout or lid, especially during refilling. DO NOT remove the lid during the boiling cycle, and make sure the lid is firmly on before boiling.
9. DO NOT adjust the auto shut-off steam tube from inside the kettle.
10. Scalding may occur if the lid is removed during the brewing cycles.
11. Do not use the kettle to heat anything other than water. DO NOT fill above the “MAX” indication. DO NOT operate the kettle if the water level is less than one cup. If the kettle is overfilled, boiling water may be ejected from the spout. The kettle is only to be used with the power base provided.
12. To protect against fire, electrical shock, and injury to persons, do not immerse the power base, cord, plug, or kettle in water or other liquid.
13. To avoid circuit overload, DO NOT operate another high-wattage appliance on the same circuit.
14. DO NOT use a power base unit other than the one supplied. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electrical shock, or injury to persons.
15. DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or has been damaged in any manner. Call our toll-free Customer Assistance Number for examination, repair, or adjustment.
16. DO NOT try to make any repairs by disassembling the electrical bases on the kettle body or power base.
17. DO NOT let the cord hang over the edge of the table or counter.
18. Always unplug from the outlet when not in use or before cleaning. Allow to cool before cleaning the appliance.
19. The kettle and power base are NOT dishwasher safe.
20. Do not use the appliance for anything other than its intended use.
21. Do not insert any object into the slots or holes of the kettle.
22. Do not use outdoors.

SAVE THESE INSTRUCTIONS!

Consumer Safety Information

THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY

To reduce the risk of injury, do not drape cord over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally.

CAUTION: This appliance is equipped with a 3-pronged polarized plug. The larger prong is to be inserted into the receptacle with the larger slot. To ensure continued protection against the risk of electrical shock, connect to properly grounded outlets only.

Notes on the Cord:

1. A short power-supply cord is provided to reduce risks resulting from becoming entangled in or tripping over a long cord.
2. Extension cords may be used if care is exercised in their use.
3. If an extension cord is used:

• The marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance.
• If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord.
• The longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over.

PARTS

1. Lid
2. Spout
3. Stay-Cool Handle
4. Water Level Window
5. ON/OFF Switch
6. Neon ON light
7. Mesh Filter
8. 2 Prongs
9. 1 Prong
10. Auto Shut Off Tube
11. Power base
12. Cord and Plug

FEATURES

• Rapid boiling
• MAX 7 cup water level window
• Steam control to switch the kettle off after boiling
• Neon light to notify when the kettle is boiling
• Automatically shuts off for boil-dry protection
• Easy seat 360° rotational power base
• Stainless steel kettle body
• Easy grip, remove, and replace the lid

OPERATING INSTRUCTIONS

Before first use, it is recommended that you fill to the maximum level mark with fresh water, boil and empty the kettle at least 3 times to clear the kettle of any tiny particles. DO NOT drink the water.

1. Open the lid.
2. Fill the kettle with the desired amount of water (no less than 3 cups and no more than 7 cups). Close the lid.
3. Connect the plug into a power outlet (110- 120V AC); switch the kettle on by pressing the switch. The neon light will illuminate to indicate that the kettle is heating.
4. The kettle will automatically switch off once the water has boiled and the neon light goes off.
5. Pour out water and repeat the process.
6. After the final rinse, let the kettle body cool.

TO BOIL WATER

1. Remove the kettle from the unplugged power base.
2. Remove the lid.
3. Fill with water, but no more than the MAX water level indicator.
4. Press the lid on so that it seals.
5. Place on the 360′ power base.
6. Plug into the appropriate outlet.
7. Press the power switch downward, and the neon light will appear.
8. When water has boiled, it will automatically switch off, and the neon light will turn off.
9. Lift the kettle and pour water slowly into the desired vessel.
10. Replace the kettle onto the power base.
11. Always check the MAX water level indicator before boiling water.

IF KETTLE BOILS DRY

1. The Automatic Boil-Dry protection will activate and shut off the kettle when there is no water to boil.
2. Remove the kettle from the power base and set it on a flat counter with the lid removed.
3. After 10 minutes, refill the kettle with cold water up to the MAX water level.
4. Replace the lid and put on the power base, and push the switch to heat water.

CLEANING

• To prolong the kettle’s life, clean the mineral deposits (white spots) from the interior of the kettle regularly.
• Always unplug from the receptacle and allow cooling down before cleaning the exterior or interior of the kettle.
• DO NOT clean by immersing the kettle body or power base in water.
• DO NOT use steel wool or abrasive cleaners to clean the outside or inside of the kettle.

Mesh Filter:

• The Mesh Filter is used to filter mineral deposits during pouring.
• Make sure the kettle is unplugged and cool before removing the Mesh Filter.
• Pull the top of the frame filter upward, but do not apply pressure to the mesh screen, or damage could occur to the frame/screen.
• Clean by brushing with a toothbrush under running water. If heavy mineral buildup is on the mesh screen, then descale by submerging it in a vinegar and water solution in a small bowl until the scale has dissolved, and then rinse.
• Replace the Mesh filter by aligning the two prongs on the bottom of the filter screen frame with the one prong at the base of the spout. Make sure when pressing on the top of the Mesh Filter frame that the top of the frame seats evenly with the inner lip of the spout.

Cleaning Methods:

1. Fill the kettle halfway with water and add 1/4 cup of white vinegar and turn on to boil. DO NOT fill over the MAX water level.
2. After boiling, empty the solution from the kettle. Refill the kettle with clean water, bring to a boil, and then discard the water. Repeat and the kettle will be ready to use.
3. If heavy mineral deposit buildup exists, repeat the operations above several times.
4. The surface of the kettle may be wiped over with a damp cloth and polished with a soft dry cloth.

Customer Service

www.chantal.com

For more Manuals by Chantal, visit ManualsLibraryy

Chantal Oslo Cordless Electric Kettle-FAQs