Dartwood 20 LED Solar Spotlight
Package Contents
Safety Information
- Keep the Dartwood Solar Spotlight away from high-temperature locations to avoid leakage or combustion of the internal battery. Do not mount near chimneys, exhausts, air conditioners, open-flame grills, boilers, or furnaces.
- Disassembling the Dartwood Solar Spotlight is not recommended as it may cause damage to internal components. The Dartwood Solar Spotlight may not function properly after disassembly.
- Make sure the Dartwood Solar Spotlight is properly installed onto the wall mount with screws to prevent damage and tampering by animals, rain, and wind.
Features
Installation
- Find a suitable location for your solar spotlight. It can be mounted on a wall, stair tread, or wood post.
- Use the anchors and screws to mount the device onto the desired location.
- Start by drilling holes for the anchors and the screws.
- Fix the screws to the anchors through the hole on the top of the spotlight.
- Tighten the screws to make sure the solar spotlight is installed firmly.
Operation
- Press the black button to turn the device on/off.
- When the device is switched on, the spotlight will turn on when it senses motion in the dark.
Note: The spotlight will not turn on even when motion is detected if it isn’t dark.
Important Tips
- Assess where intruders are most likely to enter and the path they would take. Most intruders enter the home through a back door, patio door, or garage door. Hence, it is advisable to place the Dartwood Solar Spotlight near entrances to your home.
- Mount the Dartwood Solar Spotlight on walls that an intruder would walk alongside, such as a narrow pathway. The motion sensor works best when movements are detected across it, not towards it.
- You can also mount the Dartwood Solar Spotlight beside your security camera to illuminate the camera’s vision at night.
- Although the Dartwood Solar Spotlight is weatherproof, it is advisable to mount it to a wall shaded from the rain to maximize its product life.
Warning
- Read the entire manual before using the product.
- Keep the device far from heat and fire to avoid any explosions.
- The packaging materials should be kept away from children.
- Do NOT clean the device with strong cleaning agents, solvents, or similar substances
FAQ
Q: Spotlight will not switch on
- Ensure that the device is powered on.
- Ensure that the internal batteries have been fully charged in direct sunlight.
- Ensure that the solar panels are facing south so they receive direct sunlight for most of the day, enabling the batteries to fully charge.
Q: Spotlight flashes on and off
- Battery levels may be low. Turn the spotlight off and charge the batteries by sunlight, ensuring the solar panels are placed in direct sunlight.
Q: Spotlight is not as clear as usual
- Battery levels may be low. Turn the spotlight off and charge the batteries by sunlight, ensuring the solar panels are placed in direct sunlight.
Specification
- Solar Panel: 0.55W
- LED: 20pcs
- Lumens: 150
- LED color: White
- Waterproof: IP65
- PIR sensor range: 9.8-16.4ft (3-5m)
For more information and inquiries, please reach out to: [email protected]. Made in China.
For More Manuals By Dartwood, Visit ManualsLibraryy.