Dartwood Dartpods Plus ANC Wireless Earbuds
In the Box
Introduction to Parts
- Touch button
- Earbuds indication light
- Microphone
- Earbuds charging connectors
- Lmark
- R mark
- Battery indicator
- USB-C charging port
Safety Information
- Read and follow the instructions carefully.
- Prolonged exposure to high volume levels could cause permanent hearing damage.
- Do not attempt to replace earbuds or charging case batteries yourself. It can cause damage to your property or cause injury.
- The use of noise-canceling earbuds while operating a vehicle is not recommended and is illegal in some areas. Check and obey the applicable laws and regulations on the use of headphones and earphones while operating a vehicle.
- Use a standard charger only to charge the earphones to avoid damaging the battery.
- Frequent charging may reduce the battery performance.
- Do not expose the earbuds to direct heat.
- Keep the charging ports and earbuds clean.
- Do not dismantle the product.
- Do not clean the product with oil or any corrosive cleaning agents.
- Do not use the product in any potentially hazardous places.
Active Noise-Canceling
The Dartpods+ is equipped with active noise-canceling (ANC) to cancel the noise from your surroundings or allow you to hear and speak to people while wearing the earbuds. To switch between different ANC modes, press the touch button for 3 seconds, and a voice feedback will be heard from the earbuds for the corresponding mode.
Pairing
For first use, insert the earbuds into the charging case, open the charging case, and search for “Dartpods+” from the Bluetooth menu of your mobile device. Once paired, the earbuds will connect to your device automatically when opening the charging case.
Touch Control
- Tap the touch button once to answer an incoming call, hang up the call, and play/ pause the music.
- Tap the touch button twice to play the previous song (left) or skip songs (right).
- Tap the touch button three times to increase the volume (left) or reduce the volume (right).
- Tap and hold the touch button for about 2 seconds to activate voice control and Siri.
- Tap and hold the touch button for about 3 seconds to activate/ cancel the active noise-canceling (ANC).
- Tap and hold the touch button for about 5 seconds to turn the earbuds on/ off.
Charging
- Fully charge the earbuds before using them for the first time.
- Insert the earbuds into the charging case. Make sure to place the correct earbud in the corresponding dock.
- Close the charging case cover to charge the earbuds. It takes around 1 hr to fully charge the earbuds.
- To charge the charging case, connect it with the cable provided to a power source.
- The battery indicator will show the progress during charge, and all indicators will turn off once fully charged.
Specifications
- Model: Dartpods+
- Color: Black / white
- Bluetooth version: 5.2
- Driver size: 10mm graphene speaker
- Music play time: Approx. 6hr, 30hr with charging case
- Earbuds charging time: Approx. 1hr
- Charging input: 5V1A
- Connection distance: 49ft (15m)
- Noise reduction: 33-38dB
- Earbud dimension: 0.91x 1.21 x 0.66in
- Charging case dimension: 1.93 x 2.32 x 0.94in
- Net weight: 1.60z
The actual product and specifications are subject to change without notice due to product enhancement.
Battery life and charge cycles may vary depending on your settings and actual environmental factors.
Get More Support
Scan the QR code below or email us at [email protected].
For more manuals by Dartwood, visit ManualsLibraryy
Dartwood Dartpods Plus ANC Wireless Earbuds-FAQs
How do I connect my Dartwood Dartpods Plus ANC Wireless Earbuds?
Open the charging case and ensure both earbuds are powered on. On your smartphone, enable Bluetooth and select “Dartwood Dartpods Plus” from the available device list. Once connected, you’ll hear a confirmation tone.
How do I enable Active Noise Cancellation (ANC)?
Press and hold the multifunction button or touch area on either earbud for a few seconds until you hear a tone or see an LED indicator change. This activates ANC mode, reducing background noise for clearer sound.
What does ANC mean in earbuds?
ANC (Active Noise Cancellation) uses built-in microphones and speakers to detect and cancel surrounding sounds. It allows you to enjoy your music or calls without external noise interference.
How is ANC different from regular wireless earbuds?
Regular earbuds only block noise physically (passive isolation), while ANC earbuds actively cancel external noise using inverse sound waves. This gives a quieter and more immersive listening experience.
Does ANC affect battery life?
Yes, enabling ANC uses more power, slightly reducing playtime. For longer use, turn off ANC when you’re in a quiet environment.
Can I use ANC without playing music?
Yes. ANC works even without music by continuously canceling background noise, making it useful for studying, traveling, or relaxing in noisy areas.
How do I reset my Dartwood ANC earbuds?
Place both earbuds in the charging case, then press and hold the touch sensors on both earbuds for about 10 seconds until the LED flashes. Remove and pair again via Bluetooth to complete the reset.
What is the battery life of the Dartwood Dartpods Plus?
With ANC enabled, the earbuds provide up to 5 hours of playtime, and the charging case extends total usage to around 20 hours. Battery performance may vary with volume and settings.