Dartwood Label Maker User Manual

Table of Contents

Dartwood Label MakerIn the Box

Open the top of the label maker. Push the tab on the top and lift up.
Undo the roll of label stickers and pull the end out from the bottom of the roll.
Close the top until it clicks. Make sure the end of the sticker roll is coming out through the slot.
Turn the label maker ON. Press and hold the power button until the light turns green.

Note:

Scan the QR code to download the Le Minyun App.
Open the Le Minyun App. From the ‘Home’ page, select ‘Create Label’ or ‘Template’ to get started.

After selecting ‘Create Label’, check your specifications and press ‘New’.
Select ‘Text’ and draft your sticker content.
When you are finished, select ‘Print’ at the bottom of the page. 3. Select “Text” and draft your sticker content. When you are finished, select “Print” at the bottom of the page.
Enable Bluetooth on your device. On the ‘Print Setup’ page, press ‘Equipment model’. Then, on the ‘My device’ page, select’Lseries’.
Once connected to your device, select’Print’ and check your printed label.

Select the ‘Template’ option on the ‘Home’ page. Choosing a Template.
Select your preferred template from the available options.
After choosing your template, select ‘Edit’ to add your label content. Follow steps 3 – 5 in the above section.

To charge your label maker, plug the mini USB cable into the bottom and plug the other end into a USB adapter/wall outlet.

Scan the QR code below or email us at [email protected].

For More Manuals By Dartwood, Visit ManualsLibraryy.