Dartwood Solar Water Fountain
Package Includes
- 1 x Solar Water Fountain Pump
- 1 x Spray Head Connector
- 1 x Set of Spray Head
Safety Information
Disassembling the solar panel is not recommended as it may cause damage to internal components. The solar panel may not function properly after disassembly.
Installation
- After unboxing the package, assemble the spray head connector with the solar water fountain pump outlet.
- Attach the spray head to the spray head connector.
- Immerse the entire solar water fountain in the water and make sure that it is completely immersed in water.
- Let the solar panel of the fountain be exposed to sunlight without any shade so that the solar water fountain can start spraying water.
Important Notes
- Before using the solar water fountain, the protective film on the solar panel should be removed to avoid affecting its normal operation.
- Make sure to allow the solar panels to be exposed to sunlight regularly. The pump may not work under shadow or under clouds. Because the power of the solar water fountain depends on sunlight, the pump is influenced by the weather, seasons, etc.
- The pool or fountain should have enough water to ensure the complete immersion of the solar water fountain in water.
- Clean the solar water fountain and its solar panel regularly. Make sure that nothing covers any part of the solar panel or blocks the pump.
- If you find that the water spray is blocked, you can remove the pump for cleaning. (As shown in the picture)
Specification
- Solar Fountain Size: 6.3 x 1.6 inches (16 x 4cm)
- Power: 1.4 W
- LifeTime: Over 10,000 hours
- Water Height: 11.8 – 19.7 inches (30 – 50cm)
- Max. Water Flow Rate: 35.2gallons/hours (150L/hours)
For more information and inquiries, please reach out to: [email protected]
For more manuals by Dartwood, visit ManualsLibraryy
Dartwood Solar Water Fountain- FAQs
How do I set up my solar water fountain?
Place the fountain in a sunny spot outdoors. Attach the pump to the solar panel, connect the sprinkler head or hose, and ensure the water level covers the pump but stays below the sprinkler.
How does a solar water fountain work?
The solar panel generates electricity to power the pump, which draws water from the basin and pushes it through the fountain to create flow and patterns.
Why isn’t my solar fountain working?
Check that all wires are connected securely, the panel is in direct sunlight, and there are no clouds blocking sunlight. Also inspect the pump for blockages or damage.
Do solar fountains need direct sunlight?
Yes. Solar fountains require direct sunlight to operate. They may not run indoors or in shaded areas due to filtered or low light.
Can I use my fountain at night?
Most solar fountains do not work at night unless they have a battery backup. Using batteries to run the fountain continuously is generally not recommended due to cost and maintenance.
How long does it take for a solar fountain to charge?
A solar fountain with a battery may take 2–3 days to fully charge. The pump runs only when sufficient power is available.
How do I adjust the water flow?
Some models allow you to change the flow by adjusting the pump’s speed or flow settings. Check your pump’s manual for the exact method.
How long do solar fountains last?
With proper care, most solar fountains last 4–6 years. Models with advanced solar panels and batteries may last longer.