Farberware FFSGDW Electric Bed and Blanket Warmer
INTRODUCTION
Thank you for purchasing the ELECTRIC BED & BLANKET WARMER from Farberware! With 760 watts of power, this is perfect for warming your blankets, mattresses, pillows & more so you can sleep better! This can also be used as a shoe dryer!
Features include
- Perfect for warming your blankets, mattresses, pillows & more
- 4 different heating/cooling options with 3 temperature settings
- Dual extendable hose system with retractable nozzle for maximum air flow
- Eliminates dust mites for a comfortable and healthy environment
- 8 timer settings up to 180 minutes
- Can also be used as a garment and shoe dryer
PARTS & ASSEMBLY
Your ELECTRIC BED & BLANKET comes partly assembled. Before using, remove all packing materials from the box. Check the steamer for any damage. If there is any damage, DO NOT operate the steamer. Return damaged items to the store where it was purchased.
PARTS
DISPLAY
ASSEMBLY
- Unpack the unit.
- Take each extendable hose and place it on the hose connector and twist counterclockwise until tight.
HOW TO OPERATE
The ELECTRIC BED & BLANKET warmer is perfect for warming your blankets, mattresses, pillows & can be used as a shoe and garment dryer.
- Make sure unit is assembled. Plug in the unit to enter standby state. All lights will flash once.
AUTO MODES: On the left side of the display screen there are four Auto Mode options.
• Summer: This will blow 60 minutes of hot air (149 degrees F) and then 20 minutes of room temperature air.
• Winter: This will blow 60 minutes of hot air (149 degrees F) for 60 minutes.
• Warmth: This will blow 20 minutes of hot air (149 degrees F) for 20 minutes.
• Mite: This will blow 100 minutes of hot air (149 degrees F). At this temperature for this long, it will eliminate any dust mites.
MANUAL MODE
- Press the temperature button to adjust the temperature. Colors below each have its own temperature:
• GREEN: Room temperature
• RED: 149 degrees F
• ORANGE: 122 degrees F - Press the time button to adjust the time (15, 30, 45, 60, 75, 90, 120, 180 minutes).
- Press START. Once cycle starts, time will count down on display.
CLEANING & MAINTENANCE
HELPFUL TIPS
- For maximum air flow, the ends of the hoses are retractable and can be pushed back to allow for more airflow.
- If you stop a cycle in the middle of a cycle, please wait 5 seconds before unit enters standby mode. Then you can select a new cycle.
RETURNS & WARRANTY
SHOULD YOUR UNIT NOT WORK OR IF DAMAGED WHEN YOU FIRST TAKE IT OUT OF THE BOX, PLEASE RETURN IT TOTHE PLACE OF PURCHASE IMMEDIATELY.
ELECTRIC BED & BLANKET WARMER/ FFSGDW
Should you have any questions, please contact us via email or at the customer service number listed below between the hours of 9:00 AM and 4:00 PM, Monday through Friday, Central Standard Time.
Distributed by
Nostalgia Products LLC 1471 Partnership Dr. Green Bay, WI 54304-5685
Customer Service Phone: 844-918-0509
Email: CustomerService@emllc-USA.com
One-Year Limited Warranty
This warranty applies to products purchased and used in the U.S. and Canada. This is the only expressed warranty for this product and is in lieu of any other warranty or condition. This product is warranted to be free from defects in material and workmanship for a period of one (1) year from the date of original purchase. This warranty is valid for the original retail purchaser or gift recipient from the date of initial retail purchase and is not transferable. Keep your original sales receipt as proof of purchase is required to make a warranty claim.
IMPORTANT: This warranty does not cover damages resulting from use not in conformity with the printed directions, accident, misuse or abuse, alternation, the affixing of any attachments not provided with the product, loss of parts, or subjecting the appliance to any but the specified voltage. (Read directions carefully.) This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as specified on the rating label (e.g., 120V ~ 60 Hz).
Englewood Marketing LLC excludes all claims for special, incidental, and consequential damages caused by breach of express or implied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty.
This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you.
To make a warranty claim or if service is required, please call our CUSTOMER SERVICE NUMBER. For faster service, please have the model, type, and series numbers ready for the operator to assist you. Customer Service Number
Englewood Marketing LLC In the US 844-918-0509
Email: CustomerService@emllc-USA.com
This warranty does not apply to re-manufactured merchandise.
Please read the operating instructions carefully. Failure to comply with the operating instructions will void this warranty.
For more manuals by Farberware visit, ManualsLibraryy
Farberware FFSGDW Electric Bed and Blanket Warmer-FAQs
How should I use an electric blanket?
An electric blanket should be placed on top of your mattress and under your sheet. This positioning allows the heat to distribute evenly throughout your bed while providing a layer of insulation between you and the blanket for optimal warmth.
Can I leave my electric blanket on all night?
It’s not recommended to leave your electric blanket on all night. The small filaments in the blanket can overheat and potentially cause sparks or fires. Always turn off the blanket before going to bed or leaving the house.
How does an electric bed warmer work?
An electric bed warmer works by converting electricity into heat through evenly distributed cables inside the blanket. The temperature is regulated by a thermostat, which helps maintain a comfortable level of warmth.
Should I sleep on top of or under the electric blanket?
You should sleep under the electric blanket, not on top of it. Sleeping on top may damage the internal wiring, which can disrupt the blanket’s function. If you want heating directly under you, consider using a heated mattress topper instead.
Why isn’t my electric blanket working after washing?
A common reason for a heated blanket not working after washing is damage to the internal heating wires. These wires may break or fray due to folding, washing, or wear and tear, disrupting the electrical circuit and preventing the blanket from heating properly.
How long is it safe to use an electric blanket?
It is safe to use an electric blanket for a limited time. Always turn it off before going to sleep, especially if it doesn’t have an automatic shut-off feature. Never use an electric blanket on a waterbed, adjustable bed, or similar types of beds.
Does my electric blanket automatically turn off?
Many modern electric blankets come with an automatic shut-off feature. This function enhances safety and energy efficiency by turning off the blanket after a set time, preventing overheating.
What is the function of an electric bed?
An electric bed allows you to adjust the back, foot, and height sections using an electric hand control. These adjustable beds provide comfort and convenience, making them ideal for home care use.
How can I make my bed feel warmer?
To make your bed warmer, consider using materials like flannel or fleece sheets that retain heat. Layer your bed with extra blankets, use a warmer duvet, or place a hot water bottle in your bed before sleeping. Adding a mattress topper can also increase warmth.
Is using an electric bed warmer safe?
Electric bed warmers are generally safe to use, especially when they are new. Safety issues are minimal as long as the blanket is used according to the manufacturer’s instructions. Always check for signs of wear or damage before use to ensure safety.