Fieety V7 Cordless Vacuum Cleaner
Know Your Product
2 1 upholstery brush (attached to the mainframe)
Charging wall mount
Multi-function Rolling Brush (Installed)
Long Crevice Nozzle
Charger
Extra Hepa Filter
Mini cleaning brush
Charging
Turn off the power before charging
• Please fully charge the battery before use.
• Please ensure it is charged and discharged at least once every three months.
• Be sure to use the charger in the box; other chargers may damage the battery.
Charging Method
- Connect the main body to charge
- Hang it on the wall mount to charge
3. Charge the battery directly
Assembling
Install the Battery Pack
Install Cleaning Accessories
Operating
Press the switch button to turn it on, and it will start the MID Mode. Press the button again to turn it off.
Select Cleaning Mode
- There are three suction modes: ECO<MID<MAX
- Press the Q to adjust the suction mode.
- Press the button once to switch to MAX Mode, twice to switch to ECO Mode.
Abnormal Indicator
MAX ECO
- The battery level Indicator blinks red. Indicating that the battery level is below 10%. The vacuum cleaner should be charged as soon as possible.
- The LED on the motorized brush is off, and the red brush roll Indicator keeps flashing, indicating that the brush roll is locked. Please check and clean immediately.
- The red curved arrow light blinks for 10 seconds, indicating a clogged main unit, dust cup, or duct. Please check and clean immediately.
Cleaning
Clean the Main Body
- Turn off the power before cleaning the body.
- Please use a neutral detergent and wipe the body with a half-wet cloth.
- Please avoid sun exposure and store in a cool and dry place.
Empty the Dust Cup
- Press the dust empty button to empty the dust.
- When using, if the garbage in the dust cup exceeds the MAX line, please empty it in time.
How to remove the dust cup and filter
Remove the dust cup by pressing and holding the dust cup release
buttons on the left and right sides of the handle.
Clean the Filter
HEPA filters and dust cups are washable. Make sure they are thoroughly dry before use.
Clean the Brush Roller
- Take out the roller brush.
- Remove any hair or fibers that have been wrapped around it. Using the mini cleaning brush to clean it.
- You can clean it with or without water. Please remember to use the roller after it is completely dry.
- Install the roller brush.
Maintenance
- Please clean your vacuum cleaner regularly to prolong its life.
- It is recommended that the floor brush be cleaned regularly to keep it in effective use and maintain suction power.
- It is recommended to change the HEPA filter every 2 months to ensure excellent performance. Do not use the filter when it is damaged or VI/Orn out.
- Only the original charger can be used in the machine.
FOR MORE MANUALS BY FIEETY, VISIT MANUALSLIBRARYY