Final E3000 in-Ear Headphones
Overview
Part Names
List of items in package
Main unit / Earpieces / Ear hooks / Pouch
How to Mount the Ear Hooks
After attaching the ear hooks to the cables, insert the housings into each ear, hook the ear hooks over the ears, and adjust the fit.
Using the ear hooks makes for an even more stable fit, and also makes for a reduction in touch noise.
Maintenance
Gently remove any buildup from the mesh filter with the tip of a toothpick. Please take care to ensure that no foreign particles fall inside when doing so.
Warranty and after-service
The warranty for this product is valid for 2 years from the day of purchase. During the warranty period, we will repair the product based on the provisions below. The warranty is only valid in the country in which the product was purchased. Please contact the store where you purchased the product regarding questions pertaining to repairs. For products purchased outside your country of residence and for support after the warranty period, please contact us using the Contact Form on our website.
- During the warranty period, we will repair the product free of charge if the product fails even though it was used in accordance with the instructions in the User’s Manual and the Warning and Caution sections.
- In the following cases, repairs to the product will be subject to a fee even during the warranty period:
- The necessary documentation noted on the warranty card is not complete.
- The earphones were subjected to a strong impact or were allowed to get wet. Product failure or broken wires resulting from excessive use of force on the cables.
- Failure of the product or damage caused as a result of fire, earthquake, storm, or flood damage, lightning strike, or other natural disaster.
- Repair of scratches on the surface of the housing or repair of the housing itself.
Notes on Use
CAUTION
E3000 is made of metal. Please be aware that metal parts may come into direct contact with your skin. Therefore, if you have an allergy to metal, you should not use this product. Also, if you experience skin irritation, stop using the product immediately and seek medical attention. When using the product in cold climates, be sure not to allow the product to strongly contact your skin.
Ignoring the content of this indication could cause injury or damage to household articles in the vicinity
WARNING
Ignoring the content of this indication could result in death or serious injury.
PROHIBITED
Do not use the earphones while driving a bicycle, car, or motorcycle. Doing so could cause a traffic accident and/or serious injury.
Do not use the product while walking in dangerous environments, such as near a railroad crossing or intersection where you cannot hear sounds from the outside.
When using the earphones, be careful not to play the sound too loudly. Doing so for a long period of time could affect your hearing. At 80 dB(A), exposure time shall be limited to 40 hours /week, whereas at 89 dB(A), exposure time shall be limited to 5 hours /week.
If you experience skin irritation, stop using the product immediately and seek medical attention or consult with our sales agent.
If the sound volume is too loud, the sound can be heard by other people. Use care not to disturb other people.
- The way you position the earphones in your ear affects the sound quality. We recommend trying different positions by moving the earphones around while playing music. This will allow you to find the position that generates your most preferred sound. Once you figure out your favorite position, it will be easy to set that position each time. The shapes of a person’s right ear and left ear are usually different. Therefore, the best position for each ear is usually different as well.
- When removing the earphones from your ears, always hold the main unit first and then remove. Pulling the cord could cause the wire to become disconnected.
- Because the housing is made of metal, if you bring the earphones from a cold environment and the temperature rapidly changes, condensation could occur inside the housing. In such a case, leave it for a while until any condensation inside the unit evaporates, and then use the product.
- Do not apply strong impacts to the earphones or put excess force on the cable. If the product fails or wires are broken due to abnormal use, the product warranty is invalidated.
- Leaving the product in locations exposed to direct sunlight, high humidity, or a dusty environment could cause the product to fail.
- If the product fails, do not attempt to disassemble.
- The earphone jack is for stereo reproduction only. If the earphone is connected to a monaural output jack, sound may not come out of one side.
Contacting us
Please contact us regarding inquiries using the Contact Form on our website: www.snext-final.com
Specifications
For more Manuals by Final, visit ManualsLibraryy
Final E3000 in-Ear Headphones-FAQs
How do I pair the Final E3000 headphones?
The Final E3000 is a wired in-ear headphone model and does not support Bluetooth pairing. Simply plug the 3.5mm jack into your device’s audio port.
How do I choose the right earbud size for comfort?
The Final E3000 comes with multiple ear tip sizes (S/M/L). Test each size to find the best fit:
A proper seal improves sound quality and noise isolation.
If tips feel loose, try a larger size; if uncomfortable, try a smaller size.
How do I keep wired earbuds from falling out?
Insert correctly: Twist slightly for a secure fit.
Use the right ear tips: Ensure a snug fit.
Cable management: Clip the wire to clothing to reduce tugging.
How do I clean my Final E3000 earbuds?
Wipe gently with a soft, dry cloth.
Remove ear tips and clean with mild soapy water (let dry completely).
Avoid moisture near the driver unit.
Why is there no sound from my wired headphones?
Check the audio jack for damage or debris.
Test on another device to rule out port issues.
Inspect the cable for frays or breaks.
How do I improve sound quality on wired headphones?
Use high-quality audio files (FLAC, WAV, or 320kbps MP3).
Adjust EQ settings on your device.
Ensure a proper ear tip seal for better bass and clarity.
Are the Final E3000 headphones good for running?
Yes, but secure the cable to avoid tugging.
Sweat-resistant design helps with durability.
Consider over-ear cable routing for stability.
How do I store my wired earbuds safely?
Use a case to prevent tangling.
Avoid extreme temperatures.
Loosely coil the cable to prevent damage.
What is the best volume level for safe listening?
Recommended: Below 85dB (about 60-70% max volume).
Take breaks to prevent ear fatigue.