Greenpan CC010714-001 Spin & Go Portable Blender Manual

Greenpan CC010714-001 Spin & Go Portable Blender

IMPORTANT SAFEGUARDS

Before using this electrical appliance, basic precautions should always be followed. Before using the device and its accessories, please read all instructions. If you let anyone else use your blender, ensure they understand the safety information in this User Guide and any additional safety or usage instructions. Each person using this blender should completely read the User Guide to become familiar with the safe operation of the unit.

POWER, CORD, & BATTERY SAFETY

A lithium-ion battery is the power source for this portable blender. Please read and follow all charging instructions carefully.

1. This portable blender is powered by a rechargeable battery and can operate cordlessly once charged – no charging cord or outlet is required during use. To prevent accidental blade activation, always make sure the blender is turned OFF when not in use, when cleaning, or when drinking directly from the cup lid.
2. This device contains non-replaceable batteries and moving parts that may pose a risk to the user. Do not attempt to replace the battery by yourself. Contact GreenPan Customer Service if the battery is damaged or malfunctioning.
3. Ensure the USB-C charger cord is fully dried before recharging.
4. Even if this device is severely damaged, please do not dispose of it casually. Lithium-ion batteries may explode in a fire; please recycle or dispose of them properly.
5. For safe use, charge and operate this appliance only in environments between 32°F and 104°F. Use outside this range may cause battery damage, overheating, reduced performance, or a hazard.
6. Only use the charging cord provided. Using a charging cord that does not correspond to the marking on the bottom of the motor base can result in serious injury or fire.
7. To prevent the risk of fire caused by battery damage, DO NOT immerse the motor base in any liquid. Make sure the blender cup is fully dry before storing the base inside.
8. Inspect your charging cord regularly.
9. DO NOT let the charging cord touch hot surfaces or any extreme heat source, or become knotted, tangled, or frayed.
10. DO NOT grab or carry your device by the charging cord.
11. To avoid the risk of electrical shock, fire, or bodily injury, DO NOT charge or handle the unit if it is wet, or in an area that could get wet, or handle it with wet hands.
12. DO NOT charge your device around flammable materials, on your bed or couch, or on top of any type of paper.
13. DO NOT charge in an area of extreme heat or cold.
14. Always unplug the charging cord when not in use.
15. DO NOT use your unit if the motor base is overheated, has an odor, leaks, is bulging, or changes in color/shape. Leaks from battery cells can occur under extreme conditions.
16. DO NOT use your unit in any high-heat area, such as a cabinet above your oven or stove, near a radiator or heater, or in any area exposed to direct sunlight.
17. Avoid contact with battery fluid. If a battery leaks: Keep the leaked fluid from touching your skin, eyes, clothes, or other surfaces. If the battery fluid contacts your skin, eyes, or clothes, immediately rinse the affected area with water and contact your doctor or other medical providers as appropriate.

HEAT AND PRESSURE SAFETY

DO NOT mix hot, warm, or effervescent liquids, as doing so may increase pressure and pose a risk of burns or other injuries to the user.

1. DO NOT store ingredients for extended amounts of time before or after blending them. Some foods may contain active ingredients or release gases that will expand if left in a sealed container, resulting in excessive pressure buildup that can pose a risk of injury.
2. Only blend room-temperature or refrigerated ingredients (70°F/21°C or cooler).
3. Effervescent ingredients (e.g., soda, baking powder, baking soda, yeast, some batters, cake mix, dry ice, or other things that become bubbly) release gases that increase pressure within the cup when blending. Some protein powders include effervescent ingredients.
4. Always check the ingredients of all supplements before blending.
5. Excessive blending causes ingredients to heat up, which builds pressure in the cup over time. Continuous blending for more than one minute may cause the cup to separate, exposing the blade or expelling heated contents and causing injury.

CUP SAFETY

DO NOT fill food above the MAX line.

• If the cup is hot or warm to the touch, the contents may be heated and pressurized. If this happens, take these steps:
• DO NOT OPEN. Leave the cup where it is and do not touch it or allow others to touch it. NEVER attempt to separate the cup from the motor base, as this can result in injury.
• DO NOT blend again.
• Allow the cup to cool for at least 30 minutes. If still warm, allow for more cooling time.
• Once cool to the touch, slowly open the lid while pointing away from your face and body.
• Operate only when the container cup lid is tightened, and the drinking spout cover is closed.
• DO NOT use the cup if you detect cracking, cloudiness, or other damage.

WHAT’S INCLUDED

BEFORE FIRST USE

Remove all packaging materials and the motor base from inside the blender cup.

CHARGE

Please fully charge this blender before first use. The charger port is on the back side of the base. See the charging section of this User Guide for more details.

CLEAN

Clean all food-contact components. The cup and lid are dishwasher safe. Remove the cup from the motor base before putting the cup and lid into the dishwasher. DO NOT place the motor base in the dishwasher or immerse the motor base in any liquid. For detailed cleaning instructions, please refer to page 14. WARNING: Blades are sharp! Handle with care to avoid bodily injury.

COMPONENTS

• A. Carry Handle
• B. Leakproof Lid
• C. 24 oz. Blender Cup
• D. Blade (Not Removable)
• E. Motor Base
• DO NOT immerse the base in any liquid.
• Make sure the blender cup is fully dry before storing the motor base in it.
• F. Measurement Markings
• G. Battery Indicator Light
• H. Power Button
• I. Presets
• J. USB-C Charging Port
• K. USB-C Charging Cord

CONTROL PANEL

BLEND:

Perfect for liquid-heavy recipes like iced coffee, sauces, and dressings.

• Thinner Protein Shake: liquid base + protein powder + banana + light ice
• Thinner Green Smoothie: liquid base + spinach + frozen fruit + fruit juice
• Iced Coffee Drinks: cold brew + milk + vanilla (or other flavor) + ice
• Sauces: tomato, salad dressings

SMOOTHIE:

Ideal for fruit- and veggie-forward smoothies with more solids than liquids.

• Mixed Berry Smoothie: frozen berries + banana + yogurt + milk
• Tropical Smoothie: mango + pineapple + coconut water + lime juice
• Breakfast Smoothie: strawberries + banana + oats + almond milk
• Antioxidant Smoothie: blueberries + spinach + banana + coconut milk

CRUSH:

Designed for ice and frozen ingredient-heavy beverages.

• Slushies: fruit juice + ice + fresh fruit pieces
• Frozen Cocktails: spirits + mixers + lots of ice for daiquiris, piña coladas, etc.
• Chocolate Milkshake: chocolate sauce + milk + ice + sweetener
• Smoothie Bowls: minimal liquid + frozen fruit + ice for thick, spoon-able texture

PULSE:

Gives precise control for recipes needing specific textures or gentle processing.

• Guacamole: avocado + lime + onion + tomato + cilantro
• Salsa: tomatoes + onions + peppers + cilantro + chili
• Hummus: chickpeas + tahini + lemon + oil + water
• Dips and Spreads: tapenade, French Onion, etc.

CLEAN:

To use the self-clean mode, add water + a drop of dish soap into the cup and press the Clean preset. For best results on removing odors, add water + 1 drop of dish soap + 1 teaspoon baking soda + 1 teaspoon lemon juice and press the Clean preset.

BATTERY INDICATOR LIGHT

CORD CONNECTED:

• Red or white flashing light: Charging
• White solid light: Full charge, and the cord should be removed.

NOTE: You are unable to operate while charging. Operation lockout during charge is to prevent overheating. Unit will not charge if an overheat error is present.

FOR THE PERFECT BLEND

HOW TO ADD INGREDIENTS FOR BEST RESULTS

Layer your ingredients for optimal performance: start with liquids, then add fresh fruits or vegetables, followed by leafy greens or herbs. Next, include seeds, powders, or nut butters, and finish with ice or frozen items.

IMPORTANT HELPFUL TIPS

1. Open the cup lid and add your ingredients. If ice cubes are used, please add them last. Then secure the lid and close the drinking spout. Refer to How to Add Ingredients for Best Results (page 12) when filling. NOTE: The blending capacity of this cup is 17 oz./500mL. DO NOT overfill the cup with ingredients past the max fill line.
2. Install the cup onto the base and rotate it clockwise until you hear it click into place.
3. Press and hold the POWER buttonfor 2 seconds to turn on the device. The indicator light will turn fully white, and the battery level will be displayed. NOTE: After 15 seconds of no operation, the device goes into Auto-lock mode (lights will be oscillating). The program will lock the unit to prevent accidental operation. The user must press the power buttonto unlock the unit, then select their desired mode for operation.
4. Press the preset for your blend.
5. After blending or self-cleaning, ensure the blade stops rotating before removing the cup from the motor base. The cup can be detached from the motor base for drinking. If you want to drink with the motor base attached, please turn off the motor before drinking.
6. Press and hold the power buttonfor 2 seconds to turn off the blender.
7. Open the cap and drink or pour.
8. Refer to the Cleaning & Storage section on page 14 for cleaning and storage instructions.

WARNINGS:

• NOTE: If the blade gets stuck, the cup can be inverted for a few seconds, then slowly placed upright before resuming.
• NOTE: The blade is very sharp. Handle with care.
• DO NOT mix hot, warm, or effervescent liquids, as doing so may increase pressure and pose a risk of burns or other injuries to the user.
• DO NOT fill ingredients above the MAX line.

CLEANING & STORAGE

WARNING: Even if the lid is open or removed, the blade can still spin. Always remove the cup from the motor base before cleaning.

NOTE: Blade is not removable. The blade is very sharp. Handle with care.

CLEAN MODE

1. Remove the cup from the motor base and remove the lid from the cup.
2. Pour 10–16 oz. of clean water into the cup, then add a small drop of dishwashing detergent.
3. Secure the lid onto the cup, then connect the cup to the motor base and press the “CLEAN” button (Fig. 1).
4. Stop the program after one minute.
5. Remove the cup from the motor base, pour out the contents, and rinse the container and lid with warm water.

HAND WASHING

1. Remove the cup from the motor base and clean the lid and cup with warm, soapy water.
2. NEVER put your hand inside the cup. Due to the sharp blade, please empty the contents and rinse the cup and lid with warm water.
3. DO NOT let the motor base come into contact with water or other liquids. Let all components fully air-dry before storing.

MOTOR BASE

• The motor base cannot be cleaned in a dishwasher and should not be exposed to water or other liquids.
• If necessary, please wipe the motor base with a damp cloth.

DISHWASHER SAFE PARTS

• Only the cup and lid can be put in the dishwasher.

STORAGE

• Store the device upright in a cool and dry place.
• DO NOT store mixed or unmixed ingredients in the cup.
• DO NOT stack items on the device.

NOTE: Make sure the blender cup is fully dry before storing the base inside.

NOTE: The Spin & Go packs together for compact storage (Fig. 2).

CHARGING

HOW TO RECHARGE

• Please fully charge this blender before first use, approximately 70 minutes. The charging port is on the back side of the motor base. Always use the supplied USB-C charging cord.
• When charging, the indicator light flashes. When fully charged, the battery indicator light will remain solid white.
• Recharging takes approximately 60–70 minutes. The charger outlet should be at least 25W to ensure a fast charge.
• DO NOT use a computer USB as a charging port. For more information about charging status, please refer to the battery indicator light section.

NOTE: When disconnecting the cord, pull on the plug. DO NOT pull on the cord.

NOTE: Ensure the USB-C charger cord & port are fully dry before charging.

WARNING: Do not charge if your unit or the USB-C port is wet to avoid risk of fire or bodily injury.

TROUBLESHOOTING

LIMITED WARRANTY

GreenPan Electrics are covered by a limited warranty against defects in materials and workmanship, beginning on the date you receive the product and lasting for two years. If your GreenPan Electrics product has a defect covered by the limited warranty during the warranty period, The Cookware Company (USA), LLC will, at its sole option, replace the product or provide a refund. Further information on the warranty claim process, exclusions from warranty coverage, and other terms can be found in the complete limited warranty for this product, available online at greenpan.us/warranty.

TERMS OF SALE; ARBITRATION

The terms on which The Cookware Company (USA), LLC sells GreenPan Electrics are available online at greenpan.us/pages/terms-of-sale (the “Terms”). The Terms contain very important information regarding your rights and obligations, as well as conditions, limitations, and exclusions that may apply to you. Please read them carefully.

In particular, the Terms provide that, by your purchase of this product, you and The Cookware Company (USA), LLC are agreeing to give up any rights to litigate in a court or before a jury, or to participate in a class action or representative action with respect to a claim. Other rights that you would have if you went to court may also be unavailable or limited in arbitration. Any claim, dispute, or controversy between you and The Cookware Company (USA), LLC arising from or relating in any way to your purchase of products or services will be resolved exclusively and finally by binding arbitration.

The arbitration will be administered by the American Arbitration Association (“AAA”) in accordance with the Consumer Arbitration Rules (the “AAA Rules”) then in effect, except as modified hereby. (The AAA Rules are available at adr.org or by calling the AAA at 1-800-778-7879.) The Federal Arbitration Act will govern the interpretation and enforcement of this arbitration and waiver provision.

The Cookware Company (USA), LLC will be responsible for the AAA filing fee of any such proceeding. Other than your right to pursue a claim in small claims court, as described in the Terms, the arbitrator will have exclusive authority to resolve any dispute relating to arbitrability and/or enforceability of this arbitration provision, including any unconscionability challenge or any other challenge that the arbitration provision or these Terms are void, voidable, or otherwise invalid.

The arbitrator will be empowered to grant whatever relief would be available in court under law or in equity. Any award of the arbitrator(s) will be final and binding on each of the parties and may be entered as a judgment in any court of competent jurisdiction. Attorney fee shifting in this case is governed by the Terms. You agree to an arbitration on an individual basis. In any dispute, NEITHER YOU NOR THE COOKWARE COMPANY (USA), LLC WILL BE ENTITLED TO JOIN OR CONSOLIDATE CLAIMS BY OR AGAINST OTHER CUSTOMERS IN COURT OR IN ARBITRATION OR OTHERWISE PARTICIPATE IN ANY CLAIM AS A CLASS REPRESENTATIVE, CLASS MEMBER, OR IN A PRIVATE ATTORNEY GENERAL CAPACITY.

The arbitral tribunal may not consolidate more than one person’s claims and may not otherwise preside over any form of representative or class proceeding. The arbitral tribunal has no power to consider the enforceability of this class arbitration waiver, and any challenge to the class arbitration waiver may only be raised in a court of competent jurisdiction. If any provision of the arbitration agreement described herein and in the Terms is found unenforceable, the unenforceable provision will be severed, and the remaining arbitration terms will be enforced.

HAVE QUESTIONS?

Just call us at 1-914-372-7777 or email [email protected].

For More Manuals By GreenPan, Visit ManualsLibraryy.

Greenpan CC010714-001 Spin & Go Portable Blender-FAQs