LAX MAX LK-SPM70 Portable Speaker
Control Panel
- −: Short-press to select the previous track in Bluetooth/USB/TF Card Modes, select the previous preset frequency in FM mode. Long-press to decrease the volume
- +: Short-press to select the next track in Bluetooth/USB/TF Card Modes. Select the next preset frequency in FM mode. Long-press to increase the volume.
- Play/Pause/SCAN: Play or Pause in Bluetooth/USB /TF Card Mode. When in FM mode, short-press to scan for available frequencies.
- MODE/TWS: Toggle between source Bluetooth/USB/ TF Card/ FM Radio. When in Bluetooth mode, long-press will be in TWS mode.
: Turn ON/OFF the Unit’s power supply. Short-press to answer/hang up phone call
- TF Card Slot: Insert a TF card to listen to stored tracks.
- Aux Input: Connect an external media player using a 3.5mm line-in cable.
- USB Slot: Insert a USB Drive to listen to stored tracks.
- DC 5V IN: Use the included charging cable to charge the unit. (Adaptor not included)
Features:
- Wireless Connection
- TWS Function
- Support USB/TF card
- FM Radio
- Aux input
- Hands — Free Function
- IPX Waterproof
Accessory
- USB Charging Cable: 1 piece
- Carrying Strap: 1 piece
Bluetooth Connection
Use Bluetooth mode to stream music from a Bluetooth-enabled player (eg, smartphone or tablet device). A device must be paired with the unit before using them together for the first time.
- Make sure Bluetooth is enabled on your device and that it’s next to the unit before attempting to pair it.
- Turn on the unit and set it to Bluetooth mode (press the mode button). The unit will automatically enter pairing mode.
- Use your device to search for nearby Bluetooth devices. The speaker will be listed as”SPM70″
- Select “SPM70” from the list of found/available devices.
TWS Connection
- TWS connection: The TWS connection is only for two active speakers of the same model; it cannot support quantities over 2 PCS.
- Turn on two same speakers, press the MODE button to switch to BLUETOOTH mode for both speakers.
- Long-press the MODE (TWS) button on one speaker. Then two speakers will automatically connect together.
- Pair your Bluetooth: use your device to search and connect to nearby Bluetooth devices.
USB/TF Card
- Insert the USB or TF card into the USB/TF slot. It will read the MP3 format music automatically.
- Press the Play/Pause button to Play/Pause, short press – and + to Prev. And next, long press – the and + buttons to decrease and increase the volume
Warning: When the rear flap is open, this speaker is not protected from water. Please make sure the rear flap is closed when near water or in the rain
FM RADIO
- Press the MODE button to change to FM radio mode,
- Press the Play/pause button to scan for available frequencies.
- Once it is done scanning, you can short press – or + to move forward or backward. Long press the – and + buttons to decrease and increase the volume.
Note: When in FM mode, connect the included USB charging cable to the unit as an external antenna for scanning FM radio stations.
AUX MODE
- Use a 3.5mm Aux cable
- Connect one end of the cable to the AUX port of the speaker and the other end to your audio device. You can now play your music.
For more Manuals by Blogs, visit ManualsLibraryy
LAX MAX LK-SPM70 Portable Speaker-FAQs
How do I charge the LAX MAX LK-SPM70 speaker?
Use the included USB charging cable and connect it to the DC 5V IN port. A power adapter is not included.
Can I use the speaker while it is charging?
Yes, you can, but it’s best to keep the volume low to avoid draining the battery.
How do I know if the speaker is fully charged?
When fully charged, all LED indicator lights stay solid. If the speaker is off, the LEDs will turn off completely.
Can I use this speaker without Wi-Fi?
Yes, Bluetooth allows direct connection to devices without any internet or Wi-Fi connection.
Is it safe to leave the speaker plugged in all the time?
Yes, but avoid prolonged use at maximum volume while charging to preserve battery life.
Can I perform a factory reset on the speaker?
Yes. Turn off the speaker, then press and hold the Play/Pause button while reconnecting power until the LED indicates a reset.
Can I connect the speaker directly to a phone or tablet with a cable?
Yes, you can use a 3.5mm audio cable to connect via the Aux Input.
How long does the battery last?
The battery typically lasts up to 12 hours at medium volume, depending on usage and volume levels.
How do I know if the speaker is in pairing mode?
The speaker’s LED will blink to indicate it is ready for pairing.
How do I pair the speaker with my phone via Bluetooth?
Turn on Bluetooth on your device, search for available devices, and select “Portable Speaker” to connect.