MEE audio Pebbles True Wireless Earbuds
Product Overview
Touch Controls
Getting Started
- Remove the film and return the earpieces to the case.
- Charge for 2 hours
- Remove the charging cable and open the lid to automatically enter pairing mode
- Open your device’s Bluetooth menu and select “MEE audio Pebbles.”
Charging
Charge Earbuds
Place earbuds in the case
Charge Case
Close the lid and plug in the charging cable
Case Battery Indicator
- Make sure the charging cable is not plugged in
- Open or close the case lid to activate the indicator light
Clear Pairings / Pair New Device
- Take out both earpieces and put them in your ears
- Tap either side 6 times to clear pairings. If successful, you will hear two tones.
- Open your device’s Bluetooth menu and select “MEE audio Pebbles.”
QUESTIONS?
WE’RE HERE TO HELP!
Phone Support: 626-965-1008
Monday \~ Friday 9 am to 5 pm PST
Email Support: [email protected]
All emails are responded to within 2 business days
WARRANTY
This product is covered by a 1-year manufacturer’s warranty. For more information, visit MEEaudio.com/support.
WARNINGS
Using headphones at high volumes for extended periods of time will result in permanent hearing damage. It is advised you keep volume levels moderate to low at all times for your safety. Turn the volume all the way down after connecting your earphones, then gradually increase the volume until you reach a comfortable listening level. Do not use headphones while driving a car, cycling, operating machinery, or performing other activities that require hearing surrounding sounds. Keep the device and packaging out of reach of children. This device is designed and manufactured to operate within its defined design limits. Misuse may result in an electric shock or fire. Read and follow these instructions carefully.
- If submersed in water, do not turn the device on until completely dried. Note: Liquid submersion voids the warranty.
- Danger of explosion or fire if batteries are damaged. Keep away from direct sunlight, naked flames, flammable gases, or heat sources such as radiators or stoves.
- Battery performance will be severely decreased when stored in extreme temperatures: below -10°C/14°F or above 45°C/113°F, including direct sunlight.
- Do not use around flammable gases as fire or explosion may occur.
There are no user-replaceable/reparable parts in the device. Disassembling it will void your warranty. - Only use attachments/accessories specified by the manufacturer.
- Changes or modifications to this unit not expressly approved by MEE Audio could void the user’s authority to operate the equipment.
COMPLIANCE INFORMATION
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC RULES
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
DISPOSAL AND RECYCLING
Dispose of this product in accordance with all local laws and regulations. Because this product contains electronic components and a battery, it must be disposed of separately from household waste. Contact local authorities to learn.
For More Manuals By MEE audio, visit ManualsLibraryy.
MEE audio Pebbles True Wireless Earbuds-FAQs
Q1. How do I put MEE Pebbles earbuds in pairing mode?
Take the earbuds out of the charging case. They will automatically enter pairing mode with the LED flashing red and blue. If they reconnect to a previous device, turn off Bluetooth on that device before trying again.
Q2. How do I connect Pebbles earbuds to my phone?
Enable Bluetooth on your phone, select “MEE Pebbles” from the available devices list, and confirm pairing.
Q3. How do I turn on Pebble earbuds?
Simply remove them from the charging case. They will power on automatically.
Q4. How do I use the Pebbles earbuds for the first time?
Charge the earbuds fully.
Take them out of the case to power on.
Put them in pairing mode and connect to your device via Bluetooth.
Q5. What does the MFB button do on Pebble earbuds?
The Multi-Function Button (MFB) lets you control music playback, answer or end calls, and activate your phone’s voice assistant.
Q6. How do I control volume on Pebbles earbuds?
The earbuds themselves don’t adjust volume. You’ll need to change the volume directly on your connected phone or device.
Q7. Are MEE Pebbles earbuds waterproof?
They are IPX4 water-resistant, making them safe for workouts, cycling, running, and light rain—but not for swimming or full water immersion.
Q8. How long do Pebbles earbuds last on a single charge?
They provide up to 8 hours of playback, with an additional 16 hours from the charging case (total 24 hours).