Miroco MI-MF002 Electric Milk Steamer and Frother
IMPORTANT SAFETY INSTRUCTIONS
Before using this product, basic precautions and instructions should always be followed:
- Read the instructions thoroughly and keep it for future reference.
- This appliance must be earthed.
- Keep the product away from water and other liquids to avoid short circuits.
- Stop using the product when it is damaged in any manner (including breakage of the cable).
- Don’t place the appliance on a wood surface to prevent damage.
- Do not touch the electrical parts of the device when it is powered on.
- Power the product through a power supply within the permitted voltage range.
- Don’t use extension cords.
- Do not let the cord hang over the edge of a table or counter.
- Do not touch or move the plug with wet hands to avoid an electrical shock.
- Do not put the plug on a heated surface; keep away from oil.
- Unplug from the power outlet when not in use, before cleaning, or during setup.
- Do not touch the metal parts, whisk, or surface of this product when it is powered on to avoid burning.
- Do not use a broken cable or plug. If any breakage occurs, please contact the manufacturer, its service agent or similarly qualified person for replacement to avoid hazards.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by the person responsible for their safety.
- Keep away from children.
- This appliance is for indoor use only.
- Do not add milk than the maximum level or less than the minimum level.
- Do not operate the appliance when there is no milk inside it.
- Don’t leave the running appliance unattended.
Package Contents
Specifications
How to Use
- Add an appropriate amount of milk into the pitcher, cap on the lid. Connect to a power source, The product is in standby mode now with a beep.
- Press the Power Button to start frothing/heating.
- The LED indicator will light up accordingly when working and start flashing, then turn off with 3 beep sounds when the process is completed.
- Milk will warm up once frothed.
- It is recommended to use whole milk (Fat content >3%) for better results.
- The frother can heat the milk up to 65 ± 5°C / 149 ± 41°F
- There will be a small amount of frothing once the milk is heated.
Cleaning and Maintenance
- Always disconnect the appliance from the power source after use and before cleaning.
- Never immerse the power base and cord in water or expose them to moisture.
- Clean the pitcher with the included cleaning brush or a soft cloth; never use a hard nylon brush or metal brush to avoid scratches. Do not use abrasive cleaners.
- To clean the lid, remove it from the pitcher, separate the lid and the silicon ring, and clean under tap water.
- Rinse the whisk with clean water and wipe it d
- Dry; store it in a safe place.
- Do not wash the unit in the dishwasher.
Thanks for choosing the Miroco Milk Frother.
This product is covered with Miroco product and labor warranty for 12 months from the date of its original purchase. The warranty will not apply in cases of:
- Accident, misuse, or repairs performed by unauthorized personnel.
- Any unit that has been tampered with or used for commercial purposes.
- Normal wear and tear of wearable parts.
- Use of force, damage caused by external influences.
- Damage caused by non-observance of the User Manual, e.g. connection to an unsuitable mains supply or non-compliance with the instructions.
- Partially or completely dismantled appliances.
- Defects caused by or resulting from damages from shipping or from repairs, service, or Alteration to the product or any of its parts that have been performed by a repair person not authorized by Miroco. We can only provide after-sales service for products that are sold by Miroco or Miroco authorized retailers and distributors. If you have purchased your unit from a different
place, please contact your seller for return and warranty issues. - Please have your invoice and order ID ready before contacting Customer Support.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
- (1) This device may not cause harmful interference, and
- (2) This device must accept any interference received, including interference that may cause undesired operation.
For more manuals by Miroco, visit ManualsLibraryy
Miroco MI-MF002 Electric Milk Steamer and Frother-FAQs
Does the Miroco milk frother heat milk as well as froth it?
Yes, it both heats and froths milk, producing thick foam ideal for lattes, cappuccinos, and other coffee drinks.
Should I use cold or hot milk for frothing?
Cold milk froths better initially, as it absorbs air more effectively. Once slightly warm, adjust the frother to create a smooth, rolling motion for fine foam.
Can I froth milk without heating it?
Yes, you can froth cold milk without heating. Use a manual method like shaking in a jar or whisking for best results—just be patient as it takes a little longer.
What’s the difference between a milk steamer and a milk frother?
A milk steamer heats milk, often using steam wands, while a milk frother creates thick foam. Frothers are generally better for achieving creamy, consistent foam.
Can I use the Miroco frother for matcha?
Yes, the frother can mix matcha powder with water or milk, though it may not be as precise as a traditional bamboo whisk.
How can I avoid making a mess while frothing?
Make sure the frother’s whisk is fully submerged in the milk. Shallow placement can cause splashing. Proper positioning helps form foam quickly and cleanly.
What’s the ideal temperature for steamed milk?
Steamed milk should reach around 150°F (65–70°C). Avoid overheating, as milk can scald and lose its texture.
Can the frother heat water too?
Yes, the Miroco frother can heat liquids like water to approximately 150°F (±10°F), which is suitable for tea or other warm beverages.