MusiBaby M68 Wireless Portable Bluetooth Speaker User Manual

MusiBaby M68 Wireless Portable Bluetooth Speaker

Product Overview

Power On/Power Off

Long pressfor 3 seconds

Product function introduction

Mode switching sequence:

Bluetooth→Insert TF Card→Audio Cable(AUX)→USB→Radio

(When TF Card and AUX cable are inserted together, the last inserted content will be defaulted to the playback mode.)

Bluetooth Mode

Bluetooth connection:

Long pressafter hearing the warning tone music, search for the Bluetooth device “MusiBaby-M68″ and click on the connection then you can play music from your phone.

“How to reconnect?

1. Your speakers will try to reconnect to the lost connection.
2. If the speaker does not attempt to reconnect, push the key to restart or manually reconnect via the phone’s Bluetooth device menu.

When incoming call:

• Single clickanswer the phone;
• Long pressreject to answer the call;

When playing music:

• Long press “-,+” button is switch the previous and next track;
• Single click “-,+“button adjusts the volume;
• Single clickbutton is Play / Pause;

TF Card Mode

Turn on the device, and insert the TF Card, It will play music from TF card after hearing the warning tone “Music Mode “

Aux Mode

Turn on the device and connect it with an audio cable, it will switch to aux mode after hearing the warning tone “Line in Mode “.

USB Mode

Turn on the device, You will hear the voice “Music Mode” when you insert the USB disk, then you can play the music from the USB disk.

Audio Mode

• Double clickbutton, and switch to audio mode after hearing the warning tone “ Radio Mode”.
• A single clickbutton the search channel will automatically, after the search is completed, the first station searched will be played.
• Long press “-,+” is adjusting the previous and the next broadcasting station;
• A single click of the “-,+” button adjusts the volume. (Plug in the charging cable for better radio reception)

Product Specifications

• Input voltage: 5V Speaker: 4Q5W
• SNR: 285dB Distortion: <1%
• Operating Voltage: 3.7V Weight: 350g
• Dimension: 74*74*123mm
• Frequency response: 20Hz-20KHz

Charging

• When the battery is low, you will hear the tone‘Low Battery”, then please charge it .
• Plug the USB cable into the adaptor (or the Computer’s USB port) to charge the speaker, the red indicator light will be on when charging, and the indicator light will be off when fully charged.
•  Charging time may vary by different adapters and different USB charging ports of the computer.

How to make two speakers dual pairing?

1. Make sure to turn off the Bluetooth function of your phone or Bluetooth device before turning on both of your speakers.
2. Turn on two M68 speakers at the same time.
3. Double-click the sound reduction button “-* on any one of the speakers, and then you will hear one prompt sound within 30~60 seconds. The blue light of one speaker is always on, while the blue light of another one is flashing. Both speakers connected successfully.
4. Turn on the Bluetooth function of your phone or Bluetooth device, search the Bluetooth named “MusiBaby M68″, and click connect will be OK.
5. After the first connection is successful the subsequent connection will be automatic. ( An important reminder: if your previous mobile phone was connected to any of the speakers separately, the speakers have a memory of the previous connection, it will affect the pairing. Therefore, you need to clear and forget the previous connection first.)

Notice

• Do not throw this product into fire or water.
• Do not modify, repair, or dissemble the speaker.
• Do not make contact with combustible materials directly.
• Do not submerge it in water.
• Before charging please check whether the charger model is suitable for this product.
• Do not use the Bluetooth function while charging.
• The device will automatically lose power when it’s on standby, it’s recommended to charge the speaker once a month.

Please keep your speaker and mobile phone within 10m working range. 

For more manuals by MusiBaby, visit ManualsLibraryy

MusiBaby M68 Wireless Portable Bluetooth Speaker-FAQs