NDakter Bike Chain Lock User Manual

NDakter Bike Chain Lock

Bike Lock Reset Password Steps

The initial password of the lock is “00000”

1. Open the lock with the default password “00000”
2. Turn the knob forward 90° from the default position
3. Turn the dial to set your new password
4. Rotate the “REST” knob 90° to the original position
5. Remember the new password and scrambled cipher bits
6. Dial back the new password and insert the locking tongue to complete

WARM TIPS

1. Only by setting the gear dial to the password that is currently in effect (the initial password is 00000; if you change it, it is the password set by yourself) can you turn the “RESET” knob to change the password.
2. You should set a password that can be remembered easily and write it down in your notebook or take a photo of it using your phone. Note: Be sure to put your password from left to right as order is important.
3. If you forget the password after the successful reset, you will not be able to open the lock!

For more Manuals by NDakter, visit ManualsLibraryy

NDakter Bike Chain Lock-FAQs