Ninja PB051 Pod and Grounds Coffee Maker User Guide

Ninja PB051 Pod and Grounds Coffee Maker

IMPORTANT SAFEGUARD INSTRUCTIONS

1. To eliminate a choking hazard for young children, discard all packaging materials immediately upon unpacking.
2. This appliance can be used by persons with reduced physical, sensory, or mental capabilities or a lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
3. To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT force into the outlet or try to modify to fit.
4. Keep the appliance and its cord out of reach of children. DO NOT allow the appliance to be played with or used by children. Close supervision is necessary when using near children.
5. To protect against fire, electric shock, and injury to persons, DO NOT immerse the cord, plugs, or the body of the machine in water or other liquid.
6. NEVER carry the appliance by the power cord or pull it to disconnect from the electrical socket; instead, grasp the plug and pull to disconnect.
7. DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or has been dropped or damaged in any manner. Contact SharkNinja Operating LLC for service.
8. For household and countertop use only. DO NOT let the power cord hang over the edge or touch hot surfaces such as the stove.
9. NEVER use a socket below the counter.
10. To avoid the risk of fire, electrical shock, or damage to the coffee maker, DO NOT use the coffee maker in an appliance garage.
11. Unplug from the outlet when either the appliance or display clock is not in use, and before cleaning.
12. Turn off and allow to cool before putting on or taking off parts, and before cleaning the appliance.

Care & Maintenance

1. Unplug the coffee maker from the outlet when not in use and before cleaning.
2. To prevent illness from bacterial growth in the appliance, follow all cleaning instructions in the Care & Maintenance section of this Owner’s Guide.
3. Clean the system on a weekly basis.
4. If the product is not operating properly, visit ninjakitchen.com or contact SharkNinja Operating LLC for examination, repair, or adjustment.
5. Cleaning and user maintenance shall not be done by children.

Cord Statement

1. A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord.
2. DO NOT use extension cords with this product.

PARTS & ACCESSORIES

• A Coffee Maker (Power cord not shown)
• B 56 oz. Removable Water Reservoir
• C Removable Water Reservoir Lid
• D Control Panel
• E Coffee Maker Lid
• F Brew Basket
• G Permanent Filter
• H Ninja Pod Adapter
• I Frother Whisk
• J Adjustable Cup Tray
• K Ninja Smart Scoop
• L Adapter Storage Bin
• M Removable Nozzle

USING THE CONTROL PANEL

1. Power Button
2. Brew Style Button
3. Brew Size Button
4. Start/Cancel Brew Button
5. Intelligent Clean Cycle Button
6. Smart Sensing Mode Indicators
7. Intelligent Clean Cycle Indicator (Orange)

USING THE NINJA POD ADAPTER AND PERMANENT FILTER

The coffee maker comes with the unique Ninja Pod Adapter already installed in the brew basket, and the Permanent Filter located in the Adapter Storage Bin on the bottom right side of the coffee maker. Always ensure the Ninja Pod Adapter or Permanent Filter is installed over the brew basket.

INSTALLING THE NINJA POD ADAPTER

Place the Ninja Pod Adapter in the brew basket, ensure the handle is aligned with the brew basket handle, and press down on the Ninja Pod Adapter firmly until it clicks into place.

INSTALLING THE PERMANENT FILTER

Place the Permanent Filter in the brew basket and ensure the handle is aligned with the brew basket handle.

SMART SENSING MODE INDICATORS

PRIMING YOUR NINJA SINGLE SERVE SPECIALTY COFFEE MAKER

1. Clean all accessories before your first brew.
2. Plug in the power cord, and the coffee maker will turn on automatically.
3. Lift the water reservoir off its base. Remove the reservoir lid. Fill the reservoir up to at least the 24 oz. line with fresh water and place it on the base.
4. Insert the brew basket and Permanent Filter and close the lid. Do not add coffee.
5. Place a 24 oz. cup or travel mug under the nozzle and prime the system by running a 24-oz. Classic brew with water only. After the brew is complete, discard the water. You are now ready to brew coffee.

BREWING PODS

1. To prepare for brewing using pods, open the coffee maker lid and ensure the brew basket and Ninja Pod Adapter are installed and handles are aligned.
2. Place the pod in the Ninja Pod Adapter.
3. Press the coffee maker lid down firmly to pierce the pod and ensure that it is completely closed. There will be an audible click and some resistance when closing the handle as the needle punctures the pod.
4. Place an empty vessel under the nozzle.
5. Press the Style Button and select either Classic, Rich, Over Ice, or Specialty brew (not available on all models).
6. Press the Size Button to toggle through and choose your desired size.
7. Press the Brew Button to start brewing. A confirmation beep will sound, and the progress bar on the control panel will illuminate to indicate the status of the brew. When finished, the coffee maker will beep three times.
8. To cancel the brew at any time, press the Brew Button again or press the Power Button.

BREWING GROUND COFFEE

1. To prepare for brewing using ground coffee, open the coffee maker lid and ensure the brew basket is installed.
2. Place the Permanent Filter in the brew basket; the Permanent Filter is located in the Adapter Storage Bin on the right side of the coffee maker.
3. Follow the measurements on the Ninja Smart Scoop or in the Coffee Measurement Chart to fill the Permanent Filter.
4. Close the Permanent Filter lid and the coffee maker lid.
5. Place an empty vessel under the nozzle.
6. Press the Style Button and select either Classic, Rich, Over Ice, or Specialty brew (not available on all models).
7. Press the Size Button to toggle through sizes.
8. Press the Brew Button to start brewing. A confirmation beep will sound, and the progress bar on the control panel will illuminate to indicate the status of the brew. When finished, the coffee maker will beep three times.
9. To cancel the brew at any time, press the Brew Button again or press the Power Button.

INTEGRATED FROTHER (NOT INCLUDED ON ALL MODELS)

The Integrated Frother does not heat milk.

• Add milk to your cup until it is about 1/3 full.
• For cold froth, continue to Step 2.
• For hot froth, microwave for 45–60 seconds.
• Swing the arm of the frother toward the front of the coffee maker. Install the frother whisk by twisting it to the right.
• Hold the cup under the frother and submerge the whisk just below the surface of the milk. Press and hold the button on top of the frother and froth for 30–45 seconds.
• Remove the frother whisk by twisting it to the left. Keep your cup below the whisk while you carry it to your sink or dishwasher for easy cleaning.

CLEANING & MAINTENANCE

CLEANING AFTER BREW

DISHWASHER-SAFE PARTS

Brew Basket, Permanent Filter, Ninja Pod Adapter, Water Reservoir, Frother Whisk, Nozzle, and Ninja Smart Scoop.

CLEANING THE FROTHER

Clean the Frother Whisk after each use. Hand-wash thoroughly or wash in the dishwasher.

CLEANING THE WATER RESERVOIR

Empty the Water Reservoir and hand-wash or place in dishwasher. For a better clean, we recommend placing it in the bottom rack of the dishwasher, standing upright with the opening facing downward.

CLEANING THE ADAPTER STORAGE BIN

Remove the Adapter Storage Bin from the unit and the adapter inside. Hand-wash thoroughly with warm soapy water.

CLEANING THE NINJA POD ADAPTER

If brewing pods, first remove the used pods from the Ninja Pod Adapter. Then pinch the right tab of the handle and lift straight up to remove from the brew basket. Hand-wash the Ninja Pod Adapter and brew basket with warm, soapy water. To ensure that the needle in the Ninja Pod Adapter is free from any residual buildup, we recommend using a flat wire or plastic clip, such as a paper clip, to clean it out.

CLEANING THE NOZZLE

Remove the nozzle by pinching the sides and pulling out of the coffee maker. Hand-wash thoroughly or wash in the dishwasher. We recommend checking and cleaning the nozzle periodically to ensure there is no built-up residue from brewed coffee, which may cause overflow in the nozzle. When reinstalling the nozzle, ensure that the nozzle is securely in place on the coffee maker.

CLEANING THE PERMANENT FILTER

If brewing grounds, allow the coffee maker to cool. First, remove the Permanent Filter by pinching both tabs of the Permanent Filter and the brew basket handle and lifting up to prevent dripping, then open the Permanent Filter lid back until it is fixed in place to discard the used grounds. The showerhead on the Permanent Filter can also be removed by turning it counterclockwise and pulling it off the lid. To reinstall the showerhead back on the Permanent Filter lid, line up the notches on the Permanent Filter lid with the cutouts on the showerhead and turn clockwise. Hand-wash the Permanent Filter, showerhead, and brew basket with warm, soapy water.

CLEANING & DESCALING YOUR BREWING SYSTEM

TO CLEAN AND DESCALE YOUR NINJA SINGLE-SERVE COFFEE MAKER:

1. Insert either the Permanent Filter or Ninja Pod Adapter in the brew basket and close the lid. Ensure there are no grounds or pods inside the coffee maker.
2. Remove the Adjustable Cup Tray by lifting up and out.
3. Place the vessel beneath the nozzle.
4. Fill the water reservoir with 16 oz. of white vinegar, then fill the rest of the reservoir with water up to, but not exceeding, the MAX line.
5. Once the water reservoir is filled with a white vinegar and water mixture, press the CLEAN button.
6. Press the BREW button to begin the cleaning cycle. The clean cycle will take approximately 75 minutes. The coffee maker will deliver a small amount of cleaning solution to distribute through the system. It will then pause, deliver additional cleaning solution, and repeat this process for 75 minutes. The extended pauses allow for maximum cleaning and descaling.
7. Upon completion, the coffee maker will beep, and the Clean Cycle Indicator will turn off.
8. Empty the vessel and clean the water reservoir with warm, soapy water to remove any cleaning solution that could affect the flavor of your coffee.
9. Place the vessel back beneath the nozzle and fill the water reservoir with fresh water to the 24 oz. line.
10. Flush the system by running a water-only 24 oz. Classic brew.

TROUBLESHOOTING GUIDE

There’s sediment in my coffee.

• This may be due to using finely ground coffee. To reduce the amount of sediment in the brewed coffee, use a slightly coarser grind.
• This may be due to using a damaged or old pod.

Over Ice brew is not cold.

• Ensure your cup or travel mug is filled all the way to the top with ice cubes before brewing. The coffee maker will brew at elevated temperatures to lock in the best flavor, then the ice will cool the brewed coffee to the perfect temperature.

Coffee is too weak.

• For stronger coffee, use the Rich brew setting. For an even bolder flavor, you can add more coffee grounds to the filter. DO NOT exceed the maximum recommended amount of scoops when brewing a 24-oz. coffee.

Coffee is too strong.

• For milder coffee, use the Classic brew setting. For an even milder flavor, use fewer coffee grounds in the filter.

Brew cycle is too slow.

• The brew time will vary based on size and brew style. Larger size brews and Rich brews will take longer than smaller size brews and Classic brews. The progress bar on the control panel will indicate brew status.

Cup or travel mug overflowed.

• Refer to the Approximate Brew Volumes chart on page 6.

Brew Basket overflowed.

• The bottom of the brew basket or the nozzle may be clogged. If the nozzle is clogged, refer to the CLEANING THE NOZZLE section on page 10. This can happen with finely ground coffee or too many coffee grounds in the filter. Medium-grind coffee is recommended.
• Decaf coffee grounds absorb water differently, so use fewer scoops when using decaf.

There is water left in the reservoir.

• When the reservoir is filled to a specific size and then that size is breached, there will be some water left in the reservoir. This is normal to ensure the reservoir does not run dry and affect the performance of the pump and brew system.

Coffee maker is leaking.

• After removing the water reservoir, there may be a small amount of water in the reservoir valve. This can be easily removed with a dry cloth.
• If the leak is coming from above the brew basket, refer to “Brew Basket overflowed” above.
• If the leak is coming from below the brew basket, lift the coffee maker lid to engage the drip stop.
• If the leak is coming from behind the nozzle, refer to “the CLEANING THE NOZZLE” section on page 10.
• If the leak is coming from the bottom of the coffee maker, call Customer Service at 1-877-646-5288.

Intelligent Clean Cycle Indicator is illuminating orange.

• Run a clean cycle. If you have recently completed a clean cycle, you may need to run another cycle to remove additional mineral buildup that occurs naturally over time and is common in hard-water areas. Make sure you are using vinegar or a descaling solution and follow the cleaning instructions.

Coffee is splattering.

• Some splatter is normal. Use the cup tray when possible to reduce the distance between the cup and the coffee nozzle.
• Ensure the Ninja Pod Adapter is installed over the brew basket when brewing pods and that the nozzle is fully installed on the unit.

Water reservoir is unstable.

• Ensure the water reservoir is properly installed on the coffee maker and pressed down firmly into the water reservoir base.

Coffee keeps dripping after my brew.

• Coffee dripping after your brew means that the drip stop is not engaged. Once the brew is complete, open the coffee maker lid to pop up the brew basket in order to stop dripping.

There are multiple streams of coffee coming out of the nozzle.

• Multiple streams of coffee mean that there is residual buildup in the nozzle, causing overflow.
• Refer to the Cleaning & Maintenance section on Page 10 on how to clean the nozzle.

ONE (1) YEAR LIMITED WARRANTY

The One (1) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable. SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of one (1) year from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in the Owner’s Guide, subject to the following conditions and exclusions:

What is covered by this warranty?

1. The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced up to one (1) year from the original purchase date.
2. In the event a replacement unit is issued, the warranty coverage ends six (6) months following the receipt date of the replacement unit or the remainder of the existing warranty, whichever is later. SharkNinja reserves the right to replace the unit with one of equal or greater value.

What is not covered by this warranty?

1. Normal wear and tear of wearable parts (such as blending vessels, lids, cups, blades, blender bases, removable pots, racks, pans, etc.), which require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty. Replacement parts are available for purchase at ninjaaccessories.com.
2. Any unit that has been tampered with or used for commercial purposes.
3. Damage caused by misuse, abuse, negligent handling, failure to perform required maintenance (e.g., failure to keep the well of the motor base clear of food spills and other debris), or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the repair is performed by a person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.

How to get service

If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit ninjakitchen.com/support for product care and maintenance self-help. Our Customer Service Specialists are also available at 1-877-646-5288 to assist with product support and warranty service options, including the possibility of upgrading to our VIP warranty service options for select product categories. So we may better assist you, please register your product online at registeryourninja.com and have the product on hand when you call. SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of $20.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit.

How to initiate a warranty claim

You must call 1-877-646-5288 to initiate a warranty claim. You will need the receipt as proof of purchase. We also ask that you register your product online at registeryourninja.com and have the product on hand when you call, so we may better assist you. A Customer Service Specialist will provide you with return and packing instructions.

How state law applies

This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

For More Manuals By Ninja, Visit ManualsLibraryy.

Ninja PB051 Pod and Grounds Coffee Maker-FAQs.