Nokia Power Earbuds
What’s in the box
- Charging Case
- Earbuds (L/R)
- Ear Tips (S/M/L)
- USB Type-C cable
- Quick Start Guide
Product Overview
Charging case and Earbuds:
- Charging contacts (R)
- Charging contacts (L)
- Battery status LEDs
- USB Type-C port
- Touchpad
- LED indicator light
- Microphone
- Ear tip
Get started
- Before using Nokia Power Earbuds, take off the film from the earbuds and place the earbuds back in the charging case. Then connect the USB Type-C cable to a power source to begin charging. Fully charge the earbuds and the charging case before the first use. The battery status LEDs show the current battery status.
- Earbuds LED indicator lights turn red when charging, and turn off when fully charged. If the earbud is low in battery power, the LED indicator light will keep flashing red.
- For optimal fit and audio performance, replace the ear tips with the size that best suits you.
Pair and connect with Bluetooth
- Pairing with the device
- Turning on and Pairing: When you take the earbuds out from the charging case, the earbuds will turn on and pair with each other automatically. When they have successfully paired, the LED indicator light of the right earbud will flash blue and red alternately, and the earbuds are ready to connect with your Bluetooth® device.
- Connecting with your Bluetooth device: Turn on Bluetooth in your device and choose “Nokia Power Earbuds” from the Bluetooth menu to connect. During the connection process, the LED indicator light on the right earbud will flash blue and red alternately. The LED indicator lights of the earbuds will flash blue every 5 seconds when they are successfully connected via Bluetooth.
- After the initial pairing, the earbuds will automatically connect with your Bluetooth device whenever taken out of the charging case.
- The earbuds will automatically power off if there is no Bluetooth connection within 5 minutes.
Using your earbuds
Touch control:
Additional controls:
- Manually power on and off: Touch the touchpad of two earbuds for 3 seconds to manually power on; touch the touchpad of one earbud for 5 seconds to manually power off.
- Use a single earbud: You can use the right earbud. If the earbuds have been paired with your Bluetooth device before, the right earbud will automatically connect with your device when taken out of the charging case.
- Reset to the original settings: Put the earbuds back in the charging case (the LEDs will turn red) > Touch the touchpad of two earbuds for 5 seconds until the LEDs flash blue and red alternately 3 times, indicating that the reset is successful.
Product and safety information
Remote control functions may vary depending on the model of your device and application. Soundtrack instructions do not respond to iOS devices. Since devices with Bluetooth wireless technology communicate using radio waves, they do not need to be in direct line of sight. Bluetooth devices must, however, be within 10 meters (33 feet) of each other, although the connection may be subject to interference from obstructions such as walls or from other electronic devices.
- Frequency Band: 2400 MHz – 2483 MHz
- Maximum Radio Frequency Power: -6-+4dBm
For your safety
Important: Read these simple guidelines. Not following them may be dangerous or against local laws and regulations. For further info, read the complete user guide.
Switch off in restricted areas
Switch the device off when a Bluetooth headset use is not allowed or when it may cause interference or danger, for example, in aircraft, in hospitals, or near medical equipment, fuel, chemicals, or blasting areas. Obey all instructions in restricted areas.
Interference
All wireless devices may be susceptible to interference, which could affect performance.
Batteries, chargers, and other accessories
Use only batteries, chargers, and other accessories approved by HMO Global Oy for use with this device. Do not connect incompatible products.
Protect your hearing
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Hearing
Warning: When you use the headset, your ability to hear outside sounds may be affected.
Do not use the headset where it can endanger your safety. The surface of this product is nickel-free.
Small children
Your device and its accessories are not toys. They may contain small parts. Keep them out of the reach of small children.
Take care of your device
Handle your device with care. The following suggestions help you keep your device operational.
- Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode electronic circuits.
- Do not use or store the device in dusty or dirty areas.
- Do not store the device in high temperatures. High temperatures may damage the device or battery.
- Do not store the device in cold temperatures. When the device warms to its normal temperature, moisture can form inside the device and damage it.
- Do not open the device other than as instructed in the user guide.
- Do not drop, knock, or shake the device or the battery. Rough handling can break it.
- Only use a soft, clean, dry cloth to clean the surface of the device.
- Do not paint the device. Paint can prevent proper operation.
- The earbuds are featured with a water protection level of IPX7. Water protection level is not a permanent condition and can decrease over time.
- The charging case is not water resistant.
Recycle
Always return your used electronic products, batteries, and packaging materials to dedicated collection points. This way, you help prevent uncontrolled waste disposal and promote the recycling of materials. Electrical and electronic products contain a lot of valuable materials, including metals (such as copper, aluminium, steel, and magnesium) and precious metals (such as gold, silver, and palladium). All materials of the device can be recovered as materials and energy.
Battery info
Your device has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery, as you may damage the device. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Charging time can vary depending on device capability.
Battery safety
If left unused, a fully charged battery will lose its charge over time. Always keep the battery between 15°C and 25°C (59° F and 77° F) for optimal performance. Extreme temperatures reduce the capacity and lifetime of the battery. A device may temporarily stop working if its battery is too hot or too cold.
Do not dispose of batteries in a fire, as they may explode. Obey local regulations. Recycle when possible. Do not dispose of as household waste. Use the battery for its intended purpose only.
Improper use of, or use of unapproved or incompatible batteries, may present a risk of fire, explosion, or other hazard, and may invalidate any approval or warranty. If you believe the battery is damaged, take it to a service centre or your local shop before continuing to use it. Never use a damaged battery. Do not charge your device during a lightning storm.
For more Manuals by Nokia, visit ManualsLibraryy