Nutribullet NB9-1301 Pro Deluxe Edition Blender User Manual

Nutribullet NB9-1301 Pro Deluxe Edition Blender

Important safeguards.

WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE OBSERVED, INCLUDING THE FOLLOWING:

Warning! To avoid the risk of serious injury, carefully read all instructions before operating your NutriBullet®. When using any electrical appliance, basic safety precautions should always be observed, including the following important information.

Save these instructions!

FOR HOUSEHOLD USE ONLY

GENERAL SAFETY INFORMATION

• Close supervision is necessary when any appliance is used by or near children. Keep the cord out of reach of children.
• NEVER LEAVE THE NUTRIBULLET® UNATTENDED WHILE IT IS IN USE.
• DO NOT USE OUTDOORS.
• ALWAYS UNPLUG THE NUTRIBULLET® WHEN NOT IN USE.

HEAT & PRESSURE SAFETY

To avoid personal injury, never blend hot or carbonated ingredients in any sealed NutriBullet® cup!

WARNING!

Heated ingredients can pressurize sealed containers when agitated and violently expel hot contents upon opening. Always start the blending process with room temperature or refrigerated ingredients and liquids (21°C/70°F or cooler).

Never continuously operate for longer than necessary to create your recipe, generally less than one minute.

Never blend carbonated liquids or effervescing ingredients (e.g., baking soda, baking powder, yeast, etc.). Pressure from released gases can cause a sealed NutriBullet® cup to burst, resulting in possible injury and/or property damage. Blade friction from prolonged operation can heat ingredients and generate internal pressure in the sealed container. This pressure can cause the cup and blade to separate or blended contents to erupt from the container, resulting in possible personal injury and/or property damage.

If the sealed NutriBullet® cups are warm to the touch, power off your machine and allow the vessel to cool for fifteen minutes or more. Allow the contents to settle before slowly releasing the cup from the motor base. With the NutriBullet® cup pointed away from your face and body, slowly unscrew the extractor blade to gently release any residual pressure.

• After blending, allow the contents to settle and release any pressure that may have built up during the extraction process by slowly unscrewing the container from the blade assembly. Have the container pointed away from you in case there is any built-up pressure.
• If you need to blend for longer than one minute, blend for 1-minute intervals. After the initial and each subsequent 1-minute blending cycle, allow the motor base to shut off completely and wait at least one minute before starting another cycle.
• Do not run for more than 3 consecutive 1-minute intervals to prevent the contents from overheating. Allow contents to settle for 2-3 minutes after the third extraction cycle to prevent overheating and buildup of pressure.
• DO NOT ALLOW BLENDED MIXTURES TO SIT IN A SEALED CONTAINER FOR LONG PERIODS OF TIME! Sugar in fruits and vegetables can ferment over time, releasing gases and causing pressure to build up in a sealed NutriBullet® cup. If you will not consume your smoothie immediately, remove the blade, cover the container with a lid or plastic wrap, and refrigerate. Never store any blended mixture in a sealed NutriBullet® cup, either unrefrigerated or for any prolonged period of time; contents will spoil and ferment.

VENTILATION

To prevent a fire hazard, the openings on the bottom of the motor base should be free of dust or lint and never obstructed, as they
are provided for ventilation to ensure reliable motor operation to prevent overheating. Never place your NutriBullet® on top of flammable materials such as newspapers, tablecloths, napkins, dish towels, place mats, or other similar types of materials.

CAUTION! Always operate the NutriBullet® on a level surface, leaving unobstructed space beneath and around the motor base to permit proper air circulation. Slots on the bottom of the motor base are provided for ventilation to ensure reliable operation and to prevent motor overheating.

MICROWAVE & STOVETOP HEATING SAFETY

• DO NOT BLEND HOT INGREDIENTS! After blending room temperature or cooler ingredients (21°C/70°F or less), transfer the mixture to an unsealed, microwave-safe container or to a stove-top pot to heat. Always use a thermometer to test the internal temperature of cooked ingredients; they may feel cool to the touch, but still be hot inside.
• Do not place any of the NutriBullet® parts in a microwave, oven, or stove-top pot or immerse in boiling water as this may result in damage to the accessory.
• Avoid blending the following seeds and pits in the NutriBullet®, as they contain a chemical known to release cyanide into the body when ingested: apple seeds, cherry pits, plum pits, peach pits, and apricot pits. Fruit pits may also cause damage to the blade and cup.

What’s included?

Assembly guide.

NutriBullet® cup assembly & use.

PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE NUTRIBULLET®:

• Make sure the base is plugged in for use.
• Handle the extractor blade assembly with care, as the blades are sharp.
• Never run the NutriBullet® while empty.
• NutriBullet® accessories are not intended to be used in the microwave, as it may damage the accessories.
• Never leave the NutriBullet® unattended while in use.

Never blend hot ingredients when using any NutriBullet® cup.

Warning: Heated ingredients can pressurize sealed containers when agitated and violently expel hot contents upon opening. Always start the blending process with room temperature or refrigerated ingredients and liquids (21°C/70°F or cooler).

1. Review all warning and caution statements in the Important Safeguards section (pg. 2-7) before proceeding to Step 2.
2. Place the motor base on a clean, dry, level surface such as a counter or table.
3. Add ingredients and liquid to the NutriBullet® cup. NOTE: Do not overfill! To avoid leakage, do not add ingredients beyond the MAX line.
4. Place the extractor blade onto the cup and twist until it is tightly sealed.
5. Plug the power cord into an electrical outlet.
6. Turn the cup upside down and place it onto the motor base. Gently push and twist.
7. Unlock the assembly by gently pushing and untwisting the cup counterclockwise. NOTE: Blending should not require longer than one minute to yield smooth and creamy results.

Caution: Do not remove the extractor blade from the NutriBullet® cup until blending has completely ceased. Do not use the extractor blade as a storage lid for your cup. Some foods may contain active ingredients or release gases that will expand if left in a sealed container, resulting in excessive pressure buildup that can pose a risk of injury. When storing contents in the cup, use plastic wrap or foil to seal your container. Always point the contents away from your body when unsealing.

Care & maintenance.

Cleaning the NutriBullet® is easy; simply place any of the pieces (except for the motor base and extractor blade) on the TOP RACK of the dishwasher or hand wash with warm, soapy water and rinse.

Here’s how to clean the NutriBullet®:

STEP 1:

The most important thing, ALWAYS UNPLUG the motor base from the power supply outlet when it is left unattended, before assembling, disassembling, changing accessories, or approaching parts that move in use or when cleaning. Do not attempt to handle the appliance until all parts have stopped moving!

STEP 2:

Remove the cup/extractor blade assembly from the motor base.

STEP 3:

Clean the individual components (motor base, extractor blades, NutriBullet® cups) as follows:

MOTOR BASE:

• For the most part, the motor base doesn’t really get dirty, but if you neglect to twist the extractor blade onto the cup tightly, liquids can leak out and get into the base and stick to the activator buttons.
• To avoid the risk of injury, NEVER use your hands or utensils to clean the white actuator Tabs while the NutriBullet® is plugged in.
• Do not remove the rubber or plastic liners inside the motor base.
• Use a sponge or dish cloth dampened with warm, soapy water to wipe down the inside and outside of the motor base until clean.
• Pay particular attention to the white Actuator Tabs on the inside of the motor base to loosen any sticky debris from drips and spills. If necessary, you may use a small brush to scrub the area to ensure it is kept clean.

WARNING: Never submerge the motor base in water.

EXTRACTOR BLADE:

• DO NOT REMOVE THE GASKET, as this will permanently damage the extractor blade and cause leakage. If, after washing as indicated above, additional disinfecting is desired, you may rinse with a 10% vinegar/water solution or with lemon juice. If, over time, the gasket becomes loose or damaged, you may order a new extractor blade at NutriBullet.com or contact Customer Service.
• Dry the extractor blade completely. It is helpful to turn the blade on its side in your dish drainer to ensure BOTH SIDES of the extractor blade are completely dried.

NUTRIBULLET® CUPS & TO-GO LIDS:

• These items are all top-rack dishwasher safe. We recommend rinsing them and giving them a quick brush with a dish brush to remove any dried debris before washing them in the dishwasher. NEVER use the sanitize cycle to wash the Cups as this may warp the plastic.
• Regularly check the 3 tabs on the side of the Cup (cracking, crazing, breakage, or rounding). If damaged, prevent possible personal injury.
• NEVER USE A CUP WITH A BROKEN, DAMAGED, OR MISSING TAB, AS DOING SO MAY CAUSE THE CUP AND MOTOR BASE TO SEPARATE, EXPOSING THE BLADE ASSEMBLY!

STUBBORN CLEAN UP:

• If ingredients dry inside the NutriBullet® Cup, make your cleanup a snap by filling the cup about 2/3 full with room temperature (21°C/70°F or less) water and screw on the extractor blade. Place the cup/extractor blade assembly on the NutriBullet® motor base for about 20-30 seconds. This will loosen the stuck ingredients, and with a light scrub and rinse, you’ll be all finished.

Replacement parts.

To order additional parts and accessories, please visit our website at nutribullet.com/shop/accessories or feel free to contact Customer Service:

1 (800) 523-5993.

Warranty registration

Please visit nutribullet.com/warranty-registration or call 1.800.523.5993 to register your new NutriBullet. You will be asked to enter the Serial Number* of your product, along with the purchase date and place of purchase.

The registration will enable us to contact you in the unlikely event of a product safety notification. By registering your product, you acknowledge having read and understood the instructions for use and warnings set forth in the accompanying instructions.

For more Manuals by Nutribullet, visit ManualsLibraryy

Nutribullet NB9-1301 Pro Deluxe Edition Blender-FAQs