Nutribullet NBF50700 SmartSense Blender Combo
Important safeguards.
When operating your nutribullet® device, remember:
SAFETY COMES FIRST. WHEN USING ANY ELECTRICAL APPLIANCE. BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE OBSERVED, INCLUDING THE FOLLOWING:
WARNING! To avoid the risk of serious injury, death, property damage, or damage to your device, carefully read all instructions before operating your nutribullet® device. When using any electrical appliance, basic safety precautions should always be observed, including the important information in this User Guide.
If you let anyone else use your nutribullet®, make sure that they understand the health and safety information in this User Guide, as well as any additional safety or usage instructions provided. Each person using a device should carefully read the User Guide in its entirety to become familiar with the safe operation of the unit.
Save these instructions!
FOR HOUSEHOLD USE ONLY
GENERAL USE AND SAFETY:
Failure to follow all instructions regarding the use of your nutribullet® device may result in serious personal injury, death, or property damage.
Be aware of possible hazards when using or storing your nutribullet®.
WARNING! EXTREME CAUTION SHOULD BE EXERCISED WHEN USING HOT, WARM, OR CARBONATED INGREDIENTS. NEVER BLEND HOT, WARM, OR CARBONATED INGREDIENTS IN THE CUP AS CONTENTS MAY PRESSURIZE AND MAY ERUPT UPON OPENING, CAUSING SERIOUS BODILY INJURIES OR DAMAGE. USE ONLY THE BLENDING PITCHER AND VENTED PITCHER LID TO BLEND HOT, WARM, OR CARBONATED INGREDIENTS.
- Do not use the nutribullet® for anything other than its intended purpose.
- Do not leave or put non-food items in any of the attachments when blending. Doing so may damage the unit or crack or shatter the attachment, resulting in bodily injury or property damage.
- Close supervision is necessary when any appliance is used by or near children to ensure they do not play with the appliance. Keep the cord out of reach of children.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or a lack of experience and knowledge, unless they are closely supervised and instructed concerning the use of the appliance by a person responsible for their safety.
- NEVER LEAVE THE NUTRIBULLET® UNATTENDED WHILE IT IS IN USE.
- Do not place or operate your nutribullet® on uneven or unstable surfaces.
- The risk of fire, shock, or damage to the nutribullet® during cleaning can be reduced by taking the following precautions:
- Turn off your device and unplug it before cleaning.
- Only clean the exterior of your device.
- Clean your device with a dry cloth.
- To protect against the risk of electrical shock, DO NOT immerse the Motor Base in water or other liquid. The Motor Base should only be cleaned by gently wiping with a clean cloth.
- Do not place any nutribullet® part or accessory in a microwave, conventional oven, air fryer, or stovetop pot, or immerse in boiling water, as this will damage the part.
- Do not place or operate your nutribullet® on or near a hot gas or electric burner, or in a heated oven.
WARNING! NEVER WASH YOUR NUTRIBULLET® PARTS OR ACCESSORIES USING THE SANITIZE OR HEAT CYCLE OF YOUR DISHWASHER. DOING SO CAN WARP THE PART, WHICH CAN CREATE HAZARDOUS CONDITIONS DURING USE THAT MAY RESULT IN BODILY INJURY OR PROPERTY DAMAGE.
- NEVER place any nutribullet® parts or accessories in the freezer. Do not use nutribullet® parts and accessories as storage containers in the freezer.
- Never attempt to defeat any safety interlock mechanisms on the appliance.
- Remove and safely discard any packaging material or promotional labels before using the appliance for the first time.
- Do not operate your nutribullet® if any of the parts and accessories are or appear to be damaged in any manner that may impair proper function or create a safety hazard. If you suspect your nutribullet® parts and/or accessories may be damaged, contact Customer Service for assistance at 1 (800) 523-5993.
- Do not use parts, accessories, or attachments from other manufacturers, different models of nutribullet® or Magic Bullet® products, or canning jars. Use of parts, accessories, or attachments NOT specifically designed for your particular nutribullet® device may damage your unit or cause serious bodily injury, fire, or electric shock.
- DO NOT USE OUTDOORS.
- ALWAYS UNPLUG YOUR NUTRIBULLET® WHEN NOT IN USE.
- To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
- Always POWER OFF and UNPLUG the unit and wait until the Blade comes to a complete stop before assembling, disassembling, changing accessories, or cleaning. This appliance has a polarized plug, on which one blade is wider than the other. To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit into the outlet properly, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
What’s included?
Assembly guide.
Product configurations may vary. To see our full list of nutribullet® accessories, please visit nutribullet.com
Control panel.
POWER
The Power button turns on the unit and illuminates the Control Panel.
+
The + button increases the blending speed within a range of 1 to 5. Blending speeds must be set prior to blending and can be adjusted at any point in the blending process.
—
The — button decreases the blending speed within a range of 1 to 5. Blending speeds must be set prior to blending and can be adjusted at any point in the blending process.
AUTO
The AUTO button runs a fully automated cycle that determines the exact time, speed, and setting needed to optimally blend ingredients.
NOTE: Any of the 5 speeds or the AUTO program can be used with both the single-serve cups and the blending pitcher. When blending with the single-serve cups, the unit will automatically stop after 60 seconds of blending.
BLEND
The Solid Circle BLEND button activates blending for manual speeds. Press the BLEND button once to start blending, and a second time to stop.
PULSE
The Dashed Circle PULSE button activates the PULSE blending function. Set your blending speed, then press the PULSE button for hands-on control over blending time. Press and release quickly to pulse in short bursts, or press and hold the button down for a longer pulse.
TIMER
An LED timer counts up during the blending cycle to keep track of the length of your blends. Both manual and AUTO blending programs display the timer during blending. The speed setting is displayed in the status bar above the timer.
Blending with the Pitcher.
PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE APPLIANCE:
- Make sure the Motor Base is plugged in for use.
- DO NOT attempt to operate the Blending Pitcher on the appliance without attaching the Pitcher Lid and Vented Lid Cap.
- Never run the appliance while empty.
- Appliance accessories are not intended to be used in the microwave; microwaves may damage the accessories.
- Never leave the appliance unattended while in use. Use extra caution when blending hot liquids in the Pitcher.
WARNING! ALWAYS ATTACH THE PITCHER LID AND VENTED PITCHER LID CAP TO THE PITCHER BEFORE BLENDING HOT LIQUIDS TO PREVENT SPLATTERING OF CONTENTS, WHICH MAY CAUSE BURNS AND BODILY INJURIES. THE VENTED LID CAP IS VENTILATED TO ALLOW STEAM AND PRESSURE TO BE RELEASED WHILE GUARDING AGAINST EXCESS SPLASHING. WHEN BLENDING HOT INGREDIENTS, DO NOT PLACE HANDS NEAR THE VENTED LID CAP AS HOT STEAM AND SPLATTERS RELEASED CAN RESULT IN SCALDING OR BURN INJURIES.
- Place the Motor Base on a clean, dry, level surface, such as a counter or table.
- Place the Pitcher on a clean, dry, level surface and add the ingredients to the Pitcher, making sure they do not exceed either the lower LIQUID MAX (56oz or 7 Cups) or the higher solid MAX (64oz or 8 Cups) line.
- Mount the Pitcher Lid with Vented Lid Cap onto the Pitcher with the spout opposite the handle. The Pitcher Lid with Vented Lid Cap will snap into place when secured onto the Pitcher.
- Place the Pitcher onto the Motor Base with the handle pointed directly toward the Control Panel. Twist clockwise to lock the Pitcher into place. (You should hear a “click” when it’s locked.)NOTE: If you are left-handed, place the handle facing toward the center of the blending Control Panel and twist clockwise.
- Plug the Motor Base’s power cord into an electrical outlet.
- Press the Power Button to turn on the Blender. You will see the Control Panel illuminate.
- Press the + or – buttons to increase or decrease blending speeds. Press the Solid Circle to start a blending cycle. Press the Dotted Circle for pulse blending. Press AUTO for an automated, high-speed blending cycle. NOTE: You can press the Solid Circle or AUTO buttons again to pause or stop a blending cycle.
- Once the blending cycle is complete, wait for the blades to stop turning.
- Press the Power Button to turn off the blender.
- Twist the Pitcher counterclockwise to unlock, then lift it off the Motor Base. Pour and enjoy!
Blending with the Cup.
WARNING! NEVER BLEND HOT OR WARM INGREDIENTS INSIDE THE NUTRIBULLET® CUP! USING THE CUP TO BLEND HOT OR WARM INGREDIENTS MAY CAUSE THE CUP TO SEPARATE, EXPELLING HOT CONTENTS OR EXPOSING THE BLADE, BOTH OF WHICH CAN CAUSE SEVERE BODILY INJURY AND PROPERTY DAMAGE. USE ONLY THE VENTED PITCHER TO BLEND HOT OR WARM INGREDIENTS.
DO NOT BLEND FOR LONGER THAN ONE MINUTE.
DO NOT OVERFILL WITH ICE. ALWAYS USE SUFFICIENT LIQUIDS.
- Place the Motor Base on a clean, dry, level surface, such as a counter or table.
- Add ingredients to the nutribullet® Cup. WARNING! Do not overfill! To avoid leakage, do not add ingredients beyond the MAX line!
- Twist the Extractor Blade onto the Cup so it is tightly sealed.
- Turn the Cup upside down and place it onto the Motor Base, gently turning the Cup clockwise to lock into the Motor Base.
- Plug the Motor Base’s power cord into an electrical outlet.
- Press the Power Button to turn on the Blender. You will see the Control Panel illuminate.
- Press the + or – buttons to increase or decrease blending speeds. Press the Solid Circle to start the blending cycle. Press the Dotted Circle for pulse blending. Press AUTO for an automated, high-speed blending cycle. NOTE: You can press the Solid Circle or AUTO buttons again to pause or stop a blending cycle.
- Once the blending cycle is complete, wait for the blades to stop turning.
- Press the Power Button to turn off the blender.
- Unlock the assembly by gently twisting the Cup counterclockwise. You will hear a click.
WARNING! DO NOT blend hot or warm ingredients.
WARNING! DO NOT blend for longer than one minute.
Care & maintenance.
Here’s how to clean your nutribullet®:
- ALWAYS POWER OFF THE UNIT and UNPLUG the Motor Base from the power outlet when it is not in use. Only attempt to handle the appliance once all parts have stopped moving! This includes during assembly and disassembly, while changing accessories during cleaning, and any time you leave the machine unattended.
- Detach the nutribullet® Pitcher or Cup from the Motor Base.
- Clean the individual components (Motor Base, Pitcher, and Cup) as recommended in the following pages.
NUTRIBULLET® PITCHER:
WARNING! Blades are sharp! Use caution when cleaning the Pitcher.
- The Pitcher is dishwasher-safe. We recommend rinsing and briefly scrubbing it with a dish brush to remove any remaining \ debris before placing it in the dishwasher. NEVER use the sanitize cycle to wash the Pitcher — heating it this high can warp the plastic.
- If preferred, hand-wash the Pitcher with soap and water. Stuck-on ingredients might require extra scrubbing with a dish brush or sponge.
- Regularly check the structure of the Pitcher and twisting threads for cracking, crazing, or breakage. If damaged, replace immediately to prevent the risk of personal injury.
WARNING! NEVER USE A PITCHER THAT DOES NOT PROPERLY ALIGN WITH THE BLADE. Doing so may cause the Pitcher and Motor Base to separate, exposing the blade assembly and potentially causing severe personal injury.
EXTRACTOR BLADE:
WARNING! Blades are sharp! Handle the Extractor Blade with care when cleaning!
- Clean blades immediately after each use. For stubborn buildup, use a small brush or sponge to dislodge. After washing, dry the Extractor Blade completely.
- Do not remove any components of the Extractor Blade; this can result in permanent damage to the Blade, resulting in leakage when blending. If, over time, the Extractor Blade becomes loose or damaged, you may order a new Extractor Blade by contacting Customer Service at 1 (800) 523-5993.
- Periodically inspect your Extractor Blade. If the blades do not rotate freely or are damaged, immediately discontinue use and contact Customer Service. For optimal performance, we recommend replacing the Blade every 6 months, or as needed, depending on use.
WARNING! Never leave the Extractor Blade exposed when storing. Always attach the Extractor Blade to the Pitcher for proper storage.
NUTRIBULLET® CUPS & TO-GO LIDS:
These items are TOP RACK dishwasher-safe. We recommend rinsing and briefly scrubbing them with a dish brush to remove any remaining debris before placing them in the dishwasher. NEVER use the sanitize cycle to wash the Cups — heating this high can warp the plastic.
TAMPER:
Always hand-wash the Tamper with soap and water. Stuck-on ingredients might require extra scrubbing with a dish brush or sponge.
STUBBORN CLEANUP:
If ingredients dry inside the nutribullet® Cup or Pitcher, fill your vessel with room-temperature water (70°F/21°C) to the liquid MAX line and add 1-2 drops of dish soap. For Cups, twist on the Extractor Blade and place the Cup on the Motor Base. Blend on LOW for 20-30 seconds. For the Pitcher, attach the Pitcher Lid with the Vented Lid Cap inserted, and place the Pitcher on the Motor Base. Blend on LOW for 20-30 seconds; this should loosen debris enough to scrub away with soap and water.
STORING:
Store the nutribullet® Pitcher upright with the Pitcher Lid secured on top. Do not place anything on top of the Pitcher Lid. Store the remaining pieces in a safe place where they will not be damaged and won’t cause harm.
For replacement parts.
To order additional parts and accessories, please visit our website at nutribullet.com/shop/accessories or feel free to contact Customer Service at 1 (800) 523-5993.
Product registration.
Please visit nutribullet.com/shop/accessories or call 1 (800) 523-5993 to register your new nutribullet®. You will be asked to enter the serial number of your product, along with the purchase date or date of actual delivery of the product, and the place of purchase.
The information submitted is for product registration only. Failure to complete the product registration does not diminish your warranty rights. The registration will enable us to contact you in the unlikely event of a product safety notification.
By registering your product, you acknowledge having read and understood the instructions for use and warnings set forth in the accompanying instructions.
For more Manuals by Nutribullet, visit ManualsLibraryy