Petlibro PLAF108 Air WIFI Smart Feeder
INTHE BOX
PRODUCT OVERVIEW
- Lid Release Button
- Lid
- Food Tank
- Tank Base
- Rotor
- Indicator
- Food Tank Lock
- Food Outlet
- Stainless Steel Bowl
- Bowl Tray
- Power Cable Slot
- USB-C Power Port
- Reset Button
- Power Switch
- Non-slip Rubber Pad
Buttons
Indicator Status
GETTING STARTED
Installation
- Remove the food tank cover and take out the accessories.
- Connect the power cable. (Use the feeder wirelessly after fully charging its battery.)
- Toggle the power switch to “ON” to turn on the feeder.
Add pet food
- Press the lid release button and remove the lid.
- Add dry pet food to the food tank.
- Replace the lid and press the lid release button.
- Install the stainless steel bowl and bowl tray.
App control
- Scan the OR code or search in your device’s app store to download and install the PETLIBRO app.
- Follow the instructions to configure the network.
Power off
Toggle the power switch to “OFF.”
Disassemble for cleaning
- Pull the food tank locks outwards.
- Lift the food tank cover.
- Hold the tank base, turn the rotor clockwise, and lift the rotor.
- Clean an d ai.r -dry the rotor and food bowl.
Note
Scan the QR code above to watch the video for product installation and cleaning.
Notes
- Power off the device before cleaning.
- Clean the food bowl with tap water.
- Do not clean the feeder in a dishwasher. Only the stainless steel bowl is dishwasher safe.
- Use a soft, damp cloth to clean the feeder base. Do not wash any part with electronic components.
SPECIFICATIONS
SAFETY INSTRUCTIONS
- Use the feeder in a dry place.
- Use the feeder on a level surface.
- Dispose of all packaging materials properly. Some Items may be packed in plastic bags; these bags could cause suffocation.
- Keep them away from children and pets.
- Do not use the feeder with pets that are not able to reach the food bowl or with any physical disability.
- Do not immerse the base part in water at any time, as it may damage electronic components.
- Do not use the feeder outdoors. Check its operation frequently to be sure it is operating properly.
- Do not disassemble the feeder other than as instructed in this user manual.
- Only use accessories recommended or sold by the manufacturer. The use of accessories not recommended or sold by the manufacturer may cause an unsafe condition.
- Do not modify the feeder.
- Examine the feeder after installation. Do not plug in if there is water on the power cable or plug.
- To avoid tripping, always position the power cable out of the way of foot traffic.
- Do not install or store the feeder where it will be exposed to weather or temperatures below 0°C (32°F).
- Do not use the feeder without adding pet food first.
- Power off the feeder when it’s not in use.
WARRANTY
- 12-month warranty
- For guidance on product use, please contact our customer service team via email: [email protected].
NOTICE
FCC statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, a nd can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
Radio frequency exposure statement
To maintain compliance with the FCC’s RF Exposure Guidelines, this equipment should be installed and operated with a minimum distance of 20cm from your body.
For more manuals by Petlibro, visit ManualsLibraryy
Petlibro PLAF108 Air WIFI Smart Feeder- FAQs
How do I connect my Petlibro feeder to Wi-Fi?
Open the Petlibro app, tap “Add Device”, then select “Pet Feeder.” Choose your Wi-Fi network, enter the password, and follow the on-screen steps. If the link light doesn’t blink, press and hold the SET button for 5 seconds to reset the feeder.
Does the Petlibro feeder require Wi-Fi to work?
Yes, Wi-Fi is required for initial setup and remote control through the app. Once schedules are saved, the feeder will continue dispensing meals even if Wi-Fi is unavailable.
Can I use the feeder without a subscription?
Yes. The Pet Care subscription is optional. You can skip subscription features and still fully use the feeder for scheduling and feeding.
Does the Petlibro PLAF108 have a camera?
Yes. It includes a 1080P HD camera with night vision plus two-way audio, letting you see, hear, and talk to your pet anytime.
Can this feeder dispense wet food?
No. The PLAF108 is designed for dry food only. For wet food, Petlibro offers other dedicated models.
How long does the Petlibro battery last?
With 3 new D-cell alkaline batteries, the feeder can run for up to 180 days, or you can use wall power for continuous operation.
How big is one portion of food?
One portion equals about 1/24 cup. For example, to serve 1/4 cup, set the feeder to dispense 6 portions.
Will the feeder still dispense food if it’s offline?
Yes. If power or Wi-Fi is lost, the feeder will continue to follow the saved feeding schedule, as long as it’s plugged in or powered by batteries.